Ekscentrinis presas - viena kolona

WEINGARTEN E 10

Sąlyga: geras (naudotas), Manufacturer: OMERA Type: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Throat depth, horizontal (HOR): 670 mm Throat depth, vertical (VER): 940 mm Lhodpfx Afjkvnume Isb Stroke cylinder: 350 mm Column diameter: 200 mm Specifications Metric / US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Gamybos metai: 1972, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 51512/72, Pressing force: 75 t Throat depth: 300 mm Ledpfeb Tdquex Af Iohb Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Gamybos metai: 2002, Sąlyga: naudotas, Press pressure: 63 t Throat depth: 315 mm Stroke: 8–100 mm Strokes per minute: 140 spm Ram adjustment: 63 mm Table area: 1200 x 630 mm Ledpfx Aolp U D Tef Ishb Ram area: 800 x 315 mm Through-hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight approx.: 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation Roller block rails in table Hydraulic tensioner on ram Counterbalance cylinder Approved for manual loading and unloading

Sąlyga: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Ljdpfx Afefx Hv Hs Iehb Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Gamybos metai: 1992, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 29-0288, Offer 04612 Technical Data: - Cutting capacity at 90° round: 260 mm - Cutting capacity at 90° flat: 450 x 240 mm - Cutting capacity at 45° round: 230 mm - Cutting capacity at 45° flat: 240 x 200 mm - Machine mounted on original turntable - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min Lhsdpsgin Ndefx Af Isb - Hydraulic lifting and lowering of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement approx.: W 2100 x H 1200 x D 1000 mm - Weight approx.: 500 kg

Sąlyga: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram area: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Lodpfxeb U Hwpe Af Iohb Pass-through opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam switch gear Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Sąlyga: naujas, Pressure: 40 t Outreach: 225 mm Lhedpfx Aeb U Hwtof Iob Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram area: 185 x 180 mm Ram bore: 40 H7 mm Table through-hole: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx. 2.7 t Space requirement approx. 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination - Central lubrication (Vogel) - Cam control system (Balluff) - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Gamybos metai: 1998, Sąlyga: labai geros būklės (naudotas), Schenker FA-10T torsion spring coiler w dobrym stanie Lhodpoiu H T Rofx Af Iob

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 2520, Round steel: 42 mm Square steel: 38 mm Angle steel: 90° 110x10 mm Lhodpjcxxrpjfx Af Ijb Flat steel: 150 x 16 mm Blade length: 250 mm Notching depth up to: 12 mm Notching device: L- and T-steel: 80 x 10 mm Punching unit: Press force: 50 t Stroke: 27 mm Punching unit: Capacity (diameter x thickness): 25 x 16 / 20 x 19 mm Machine weight approx.: 1.6 t Space requirement approx.: 1.6 x 0.85 x 1.8 m

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Large, semi-automated Pace cutting system Polar 137 XT-Autotrim with stack lift, jogging unit with counting scale, gripper transport system, turning gripper, and unloader, built in 2010, with approximately 5.43 million cuts. Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogging unit by the operator, jogged, and then automatically transferred by the Autotrans gripper system from behind the jogger onto the rear table of the high-speed cutter and rotated as required. After cutting, the Transomat automatically places the layers onto a pallet, while cutting can continue simultaneously. Polar Stack Lift LW 1200-4 Platform dimensions: 80x126 mm Load capacity: 1,200 kg Lhedpfx Afsxd U Saj Ijb Equipped with steplessly adjustable reflex light barriers for automatic lifting or lowering. Jogging Unit RAH-4 with air removal roller and discharge for rear table feeding Usable format up to 75 x 105 cm. The jogged material is automatically discharged to the rear into the STR stack rack. The Autotrans gripper transport system then handles the layer transport to the rear table of the high-speed cutter. Sheet scale – Polar Counting Scale Avery Weigh-Tronix for creating precisely measured cutting layers. Gripper transport system POLAR Autoturn – Clamp transport for rear table loading and turning gripper takes the prepared cutting layer from the stack rack or buffer table. Via air tables, whose air cushion optimizes material flow, the material is directly conveyed to the rear table of the high-speed cutter and deposited precisely there. The gripping system holds the cutting layer firmly during transport, ensuring layers stay perfectly aligned even when pre-aligned. Cutting machine Polar 137 XT-AT with touch operation and Autotrim function for automatic waste removal under the front table during cutting. - Lowerable left side gauge (required for rear table loading), also enabling formats with a diagonal of...