Vienos kolonos ekscentrinis presas

Weingarten ARP 100

Būklė: naudotas, Single-Column Eccentric Press WEINGARTEN Type ARP 100 Machine No. 122481 Year of manufacture: 1984 Pressing force: 100 tons Throat depth: 400 mm Table size: 920 x 660 mm Ram area: 700 x 450 mm Clearance (rear): 735 mm Stroke adjustment: 20 - 160 mm Ram adjustment: 80 mm Die height at 160 mm stroke: max. 355 mm (without bolster plate) Die height at 20 mm stroke: max. 425 mm (without bolster plate) Strokes per minute: 60 spm Bolster plate table area: 920 x 610 mm Bolster plate thickness: 90 mm Drop-through hole in bolster plate: Ø 210 / 180 mm Drop-through hole in machine table: Ø 210 / 180 mm Table height above floor: 800 mm (without bolster plate) T-slot width in table and ram: 22 mm Clamping shank bore: 50 mm Motor power: 11 kW Power supply: 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch-brake combination - Electrically adjustable ram with stroke counter - Clamping shank bore with clamping piece - Front crankshaft support bearing Gisdou Rwa Iopfx Ah Ajt - Gear train in enclosed oil-bath gearbox - Two pneumatic ram compensation cylinders - Automatic central grease lubrication by WOERNER - Stroke release via electric foot switch or two-hand control console - Electrical control cabinet fixed to the machine - Operating manual and wiring diagram included - UVV compliance for manual loading/unloading Space requirements (L x W x H): 2200 x 1600 x 3250 mm Weight: 8.3 tons In good condition

Būklė: geras (naudotas), Manufacturer: OMERA Type: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Gsdpfxekvnume Ah Aeit Throat depth, horizontal (HOR): 670 mm Throat depth, vertical (VER): 940 mm Stroke cylinder: 350 mm Column diameter: 200 mm Specifications Metric / US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Gamybos metai: 1981, būklė: paruoštas naudoti (naudotas), Two identical eccentric presses are available, nominal force: 1000 kN, stroke rate: 30-85/min, adjustable stroke: 20-125 mm, weight: 8 t, year of manufacture machine 1/2: 1978/1981, with documentation. Godolc N Rvjpfx Ah Aoit

Būklė: naudotas, Gamybos metai: 1983, Spaudimas 100 t Iškyša 375 mm Eiga 20-125 mm Eigos dažnis 60 eigų/min Stumoklio reguliavimas 80 mm Stalo paviršius 920x660 mm Stumoklio paviršius 700x450 mm Godjxh Swhspfx Ah Ajit Stalo išleidimo anga Ø90 mm Stumoklio kaiščio anga Ø50 mm Mašinos svoris apie 8 t Reikalinga erdvė apie 2100x1500x3300 mm Pneumatinė sankabos-stabdžio kombinacija Stumoklio balansuojantis cilindras Motorinis stumoklio reguliavimas Hidraulinė perkrovos apsauga stumoklyje Centrinis tepimo taškas tepalu Priekinis atraminis guolis

Būklė: naudotas, Eccentric Punching Press HAULICK + ROOS Type RVD 125 Double Column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Gedpfx Ahshlnzkj Aoit Table size: 880 x 800 mm Table opening: 470 x 140 mm Column gap: 900 mm Side column spacing: 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Shut height as shown: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double connecting rod drive with 4-point eccentric shaft bearing for off-center ram force absorption - Free-standing electrical cabinet - NC roller feeder EBU, width 250 mm, year 2003 - Separate control panel for roller feed unit - Coil direction from left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2008, mašinos/transporto priemonės numeris: LSP 100T, Gamybinė hidraulinė spaudė su H tipo stovu 100 t su vedimu Gamintojas: Stenhoj, Danija Gsdpfx Ahog Rn Efe Aeit Pagaminimo metai: 2008 Maksimali spaudimo jėga: 1 000 kN / 318 bar Presavimo cilindras, eiga: 400 mm Presavimo stalas su T formos grioveliu 1 500x900 mm viršuje 1 500x1 050 mm apačioje Stovo pravaža: 1 700 mm Būklė: kaip nauja, mašina naudota tik bandomiesiems paleidimams ir nuo to laiko saugoma sandėlyje. Visa informacija pateikiama be garantijos. Be transportavimo išlaidų.

Būklė: naujas, Gamybos metai: 2025, Band width: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Strokes: max. 260 1/min at full feed length Feed force: 90 N Available with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available. Godpj Ea U Hjfx Ah Aoit

Būklė: naudotas, Gamybos metai: 2021, mašinos/transporto priemonės numeris: HB 2022-A-073, spaudimo jėga: 300 t, Portal Straightening Press – Manufacturer Hidrobrasil – 300 t Gantry Press – Table 2,500 × 1,600 mm For sale is a powerful portal straightening press from Hidrobrasil, featuring a press force of 300 t. The machine is equipped with a movable bridge design, laterally traversing cylinder, and a robust grid table, making it ideal for precise straightening, assembly, and heavy-duty applications. ===== Technical Data & Information: Portal Straightening Press Hidrobrasil – 300 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry Press / Double Column Press - Press Force: 300 t (3,000 kN) - Machine Weight: approx. 22 t - Dimensions (L × W × H): 4,500 × 2,300 × 3,700 mm ==== Working Area - Table Size: 2,500 × 1,600 mm - Daylight Opening: 700 mm - Stroke: 700 mm - Table Height: approx. 900 mm ==== Construction & Equipment - Movable bridge via rack-and-pinion with two geared motors - Cylinder traverses laterally via rack-and-pinion - Grid-structured table - T-slots as per customer request (standard: 22 mm) - Induction-hardened cylinder - Machine body double coated - Lubrication via grease nipples - Operation via pivoting arm on the bridge - Pressure adjustment via monitor (50 – 300 t) - Oil temperature display on tank ==== Power & Accuracy - Free lifting force: 500 kN - Pressure accuracy: ± 5 bar - Deflection: ≤ 0.8 mm/m (at 70% load) - Pressure build-up time: max. 3 s (steel on steel) ==== Speeds - Pressing speed: approx. 8 mm/s - Fast stroke (closing): 17 mm/s - Opening speed: up to 55 mm/s ==== Hydraulics - Main pump: Bosch Rexroth, approx. 93 l/min - Operating pressure: max. 350 bar - Oil volume: approx. 900 l (HLPD 46) - Ambient temperature: max. 45 °C - Oil temperature: max. 55 °C - Number of cylinders: 1 ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor power: 22 kW (IE3) - Total connected load: approx. 30 kW ==== Further Information - Thermal working range: 80 – 120 °C Gisdpjh Agnusfx Ah Aet - Operating sides: 3 - Sound pressure level: max. 78 dB(A) - Minimum hall height: 5,000 mm ===== Straightening tasks, assembly work, heavy-duty processing, forming technology, steel construction, toolmaking, maintenance Gantry press, straightening press, double column press, hydraulic press, industrial press, tool tryout press Looking for a hydraulic press tailored to your requirements? Contact us for an individual quote. Our hydraulic presses are manufactured in accordance with German Machinery Directives, European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses surpass Canadian and European safety standards as they comply in all respects with the Brazilian National Safety Regulation NR 12, which is based on these standards. Our key strength is custom machine construction and press automation. We supply customized hydraulic presses at surprisingly attractive prices. For the hydraulics, we mainly use components from leading European manufacturers.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2020, spaudimo jėga: 500 t, SORG Four-Column Press – 500 t – 1,100 × 800 mm – Calibration Press For sale is a hydraulic four-column press (calibration press) manufactured by SORG with a pressing force of 500 t. This machine is designed for precise calibration and forming processes, offering high repeat accuracy alongside rapid cycle times. Thanks to its robust construction and powerful hydraulics, it is ideally suited for industrial series production and demanding precision applications. ==== Technical Data & Information: Hydraulic Four-Column Press – Calibration Press – 500 t ==== General Information - Manufacturer: SORG - Model: Four-Column Press - Machine designation: Calibration Press - Type: Four-Column Press - Press force: 500 t - Machine weight: approx. 22.8 t - Height above floor: approx. 5,100 mm - Minimum hall height: 6,500 mm Gedpsffamvefx Ah Aoit ==== Working Area - Clearance width: 1,100 mm - Installation height: 800 mm - Stroke: 600 mm - Table height above floor: 900 mm ==== Table & Ram - Table area: 1,100 × 800 mm - Ram area: 1,100 × 800 mm - Max. tool weight: 2,000 kg - Max. upper tool weight: 1,000 kg ==== Speeds - Closing speed: 60–200 mm/sec - Pressing speed: 0–9.5 mm/sec - Opening speed: 28–200 mm/sec ==== Hydraulics & Power - Hydraulic pressure: 300 bar - Main motor: 75 kW - Pump capacity: approx. 270 l/min - Oil tank: 600 l - Number of press cylinders: 1 unit - Number of travel cylinders: 2 units ==== Control & Safety - Control: Siemens S7 - Safety control: Pilz Multi - Precise pressure and motion control for calibration processes ==== Application & Features - High repeat accuracy - Suitable for calibration, pressing, and forming processes - Robust construction for continuous operation ===== Calibration, forming, series production, precision forming, toolmaking Hydraulic press, calibrating press, four-column press, forming press, industrial press, production press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), as well as EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with Brazil’s national safety directive NR 12, which builds on these standards. Our strongest assets are custom machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly competitive prices. The hydraulics of our presses predominantly use components from leading European manufacturers.

Būklė: naudotas, Material width: 304.8 mm Material thickness: 0.12 – 2.2 mm Feed length: 304.8 mm Gisdpfx Ahocxxrxo Ajt Clamping force of holding gripper: 850 N Clamping force of feed gripper: 4410 N Feed force: 650 N Approx. machine weight: 0.15 t Approx. space requirement: 0.7 x 1.05 x 0.6 m