Medienos smulkintuvas Smulkintuvas

WEIMA WL 6

Sąlyga: naudotas, Gamybos metai: 2026, Special price – Exhibition machine Garbsen Our machine concept WL 6 The Weima high-performance shredder, with its flexible range of applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips and achieves, especially with bulky materials, an enormous reduction in volume. Functionality: The machine is equipped with a large feed hopper and can be loaded either via a conveyor belt or by hand. This hopper can be adapted to individual requirements and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher feeds the wood waste to be shredded into the rotor’s cutting area and is controlled automatically based on load. The internal pusher guides are made of highly wear-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are mounted on universal joints to avoid lateral forces on the piston seals. The patented and profiled solid-steel V-rotor has a diameter of 252 mm and operates at a rotor speed of 80-120 rpm. The concave-ground, aggressive, and four-way reversible cutting knives/rotating cutter crowns are fitted in milled knife pockets on special knife carriers. This patented system guarantees, for the first time, a reduction in the cutting gap between counter knife and rotor, high throughput, low energy consumption, and optimal discharge of the shredded material. The screen mounted under the rotor determines the chip size (10—100 mm). On request, a hydraulically opening screen basket is also available. Power transmission from the electric motors is via V-belts to a strongly dimensioned gearbox mounted on the rotor shaft end. Precise cutting with high throughput thanks to profiled V-rotor The V-rotor, specially developed by WEIMA, is universally applicable and made from solid material. Its aggressive material feed, with up to two rows of knives, guarantees high throughput with low power requirement. It can be fitted with hardened cutting knives made of steel in edge lengths of 30 mm and 40 mm. These knives are reversible, which dramatically reduces maintenance costs. Intuitive operation with Siemens PLC control and touch display To ensure that electronics are optimally matched to the machine, we design, build, and wire our own control cabinets. We use only high-quality components – for example, from Siemens or Rittal. Intuitive touch interfaces guarantee rapid adjustments. Functions such as adjusting the pusher cycle or stops ensure high throughput. The built-in overload protection also prevents machine damage. Technical specification WL 6 Feed opening: 800 x 1,250 mm Hopper volume: 0.9 m³ Rotor length: 800 mm Rotor diameter: 256 mm Drive power: 22 kW Rotor speed: 90 rpm Max. number of knives: 42 Type and size of knives: concave / 40 x 40 mm, reversible cutter crowns Screen hole size: 10–60 mm Paintwork: WEIMA standard RAL 2022 / 7016 Power supply: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: – Control cabinet* (Rittal), incl. electrical control (Moeller / Siemens) and Lhsdpox Twdmofx Abrjc

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Visas pjovimo cechas paletiniams pjautiniams medienos ruošiniams, sudarytas iš: 1. „Häwa“ rąstų aikštelė su šaknų reduktoriumi ir „Valon Kone“ žievės šalinimo įranga VK 90. Gamykliškai patikrinta įeinančios žaliavos matavimo sistema (Jörg). Rūšiavimo sistema su 28 dėžėmis. Medienos ilgis nuo 2,0 iki 5,0 m. Rąstų skersmuo nuo 20 iki 90 cm. 2. Pjovimo cechas: „Möhringer“ juostinis pjūklas, bėgantis su „Flexi Drive“ vežimėliu. Rąstų įkėlimo sistema su pakopiniu išskyrimu. Lazerinis matavimas „Bidac“. „Kallfass“ ilgio pjovimo įrenginys. Antrinis pjovimas: „EWD Optimes“ su žievės pjovimo įrenginiu ir dviem banginiais pjūklais „NKU“. „Brodbaek“ kraštų pjovimo automatas. Automatinė pagrindinės produkcijos pakavimo sistema, tuščių padėklų valdymas pagrindinei ir šoninei produkcijai. KUKA robotas šoninės ir pagrindinės produkcijos pakavimui, galimos keturios matmenų konfigūracijos. Pilna mechanizacija, elektros ir elektronikos valdymo skydai ir kt. Atliekų šalinimas. Detalūs planai arba vaizdo įrašas gali būti atsiųsti paprašius. Ljdpfex T Azwox Abrehc

Sąlyga: labai geros būklės (naudotas), Smulkintuvas Weima WL6, variklis 18,5KW, rotoriaus ilgis 800 mm, 21 peilis ant rotoriaus, sietas 15 mm Ledpfx Asw Aaumobrshc hidraulinė stalčius, autoreversas, Nauji peiliai ant rotoriaus ir 2 priešpeiliai.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Weima Einwellenshredder Ljdpfeivpthsx Abrjhc Modell: WL6S Hauptantrieb: 22 kW

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Smulkintuvas SG - 500/200 Lsdpfxjwhw Iue Abrjhc - Smulkintuvas pilnai restauruotas ir paruoštas eksploatacijai - Prie smulkintuvo yra 8 m ilgio vibruojanti transportavimo juosta su atskyrimu, kur atskiriamos pjuvenos, įrengta magnetu su metalo detekcija Prieduose rasite išsamius techninius duomenis apie įrenginį - elektros valdymo skydas prie įrenginio.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Crusher by the German company WEIMA – after technical inspection – year of manufacture: 1992 Lhsdsuditwjpfx Abrec – documentation included TECHNICAL PARAMETERS: Feed opening: 800 x 1000 mm Rotor diameter: 315 mm Rotor length: 800 mm Rotor speed: 90 rpm V-rotor Main motor: 22 kW Number of knives: 19 pcs Reversible cutting knives: 30 mm x 30 mm Screen: Ø 20 mm and 15 mm Auto-reverse function Hydraulic pusher drawer Pusher height: 275 mm Discharge flange diameter: Ø 200 mm Machine dimensions (L/W/H): 210 / 160 / 180 cm Weight: 1600 kg

Sąlyga: naujas, Gamybos metai: 2026, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The high-performance WEIMA shredders, with their flexible applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips, achieving significant volume reduction of even bulky materials. Operating Principle: Lhjdpfsh Eiw Ijx Abrec The machine is equipped with a large feed hopper and can be loaded either with a conveyor belt or manually. The hopper can be customized to individual requirements and ensures continuous and cost-effective material feeding without the need for manual assistance. Technical Specification WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of rotor: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 10-60 mm available (standard 15-20 mm) Paint finish: WEIMA standard RAL 2002 / 7016 Electrical connection: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) with electrical control system (Moeller / Siemens) and star-delta start - Rubber vibration dampers - V - rotor (patented) with integrated knife pockets - Gear limit switch - Pressure bar - Extra robust Weima WAP gearbox - Logspacer (anti-blocking hopper) - Second knife row Available from stock in 54634 Bitburg - Immediately available - Request more information

Sąlyga: geras (naudotas), Gamybos metai: 1993, Rotor width 800 mm 22 kW motor 20 knives on the rotor, 25 mm concave A wooden frame is also included to raise the chipper so that a conveyor belt can fit underneath. Lhsdjp H Sv Dspfx Abrjc

Sąlyga: naujas, Gamybos metai: 2026, Weima Single-Shaft Shredder Type WL 6 Power output: 18.5 kW Our Machine Concept: WL 6 The Weima high-performance shredders, with their flexible application options, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving significant volume reduction of bulky materials. Lhodpfx Ash Hnp Debrec Functionality: The machine is equipped with a large feed hopper and can be loaded via conveyor belt or manually. The hopper can be adapted to individual requirements and guarantees continuous and cost-effective feeding without the need for manual intervention. Technical Specification WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Rotor working width: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80–120 rpm Number of knives: 42 pcs Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 10-60 mm possible (standard 15–20 mm) Paint finish: WEIMA standard RAL 2002 / 7016 Connection: 400 V +/-5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical controls (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-Rotor (patented) with integrated knife pockets - Gearbox limit switch - Pressure bar - Extremely robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second knife row In stock at 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2026, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The high-performance Weima shredders, with their versatile applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving enormous volume reduction especially with bulky materials. Operating Principle: Lhsdpfx Abjcbtpkorsc The machine is equipped with a large feed hopper and can be loaded via conveyor belt or manually. This hopper can be adapted to individual requirements and ensures continuous and cost-effective material feeding, eliminating the need for manual intervention. Technical Specifications WL 6 / 18.5 kW - Hopper opening: 800 x 1,000 mm - Hopper volume: 0.9 m³ - Rotor working width: 800 mm - Rotor diameter: 252 mm - Drive power: 18.5 kW - Rotor speed: 80–120 rpm - Number of cutters: 42 pcs - Cutter type and size: concave / 40 x 40 mm, reversible cutting crowns - Screen perforation: 10–60 mm possible (standard 15–20 mm) - Paint finish: WEIMA standard RAL 2002 / 7016 - Connection data: 400 V +/- 5% / 50 Hz - Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electric controls (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with profile-milled cutter pockets - Gear limit switch - Pressure bar - Extremely robust Weima WAP gearbox Recommended Accessories - Logspacer (self-cleaning hopper) - 2nd row of cutters From stock 54634 Bitburg - Immediately available -

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, bendras svoris: 9 000 kg, pjovimo aukštis (maks.): 1 200 mm, pjovimo plotis (maks.): 1 100 mm, vynų diametras: 1 400 mm, bendras plotis: 2 100 mm, bendras ilgis: 2 400 mm, įėjimo įtampa: 220 V, juostinio pjūklo ilgas: 10 450 mm, pjūklo juostos plotis: 206 mm, galia: 90 kW (122,37 AG), tuščias svoris: 19 000 kg, pjovimo greitis: 40 000 mm/min, Įranga: kabina, Parduodame visą pjovimo liniją su vertikalia juostine pjūkle VTZ 1400 PLUS, gamintojas Mebor. Pasiūlyme yra: - Vertikali juostinė pjūklė VTZ 1400 PLUS, gamintojas Mebor - Tvirtas rąstų transporteris su užkrovimo rankomis - Rąstų freza – kanteris BM900, gamintojas Mebor - Vertikalios juostinės pjūklės operatoriaus kabina - Voleliniai ir grandininiai transporteriai Lhodpfx Asxq Rgysbroc - Kantosavimo linija VR800 S, gamintojas Mebor, su servo valdoma didelės spartos diskinio pjūklo pozicionavimu - Dviašė daugiapjūklė diskinė pjūklė VC 900 D, gamintojas Mebor - Atliekų linija - Ašinė atliekų smulkinimo mašina TH200/500/3, gamintojas Rudnick & Enners - Rūšiavimo linija 47-14, gamintojas Holzmatic

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1993, WEIMA WL 6 A Shredder Crusher from the German manufacturer WEIMA – after technical inspection – in very good condition – year of manufacture: 1993 – complete documentation TECHNICAL SPECIFICATIONS: Feed opening dimensions: 800 x 1000 mm Rotor diameter: 175 mm Rotor length: 800 mm Main motor: 18.5 kW Number of knives: 18 pcs Reversible cutting knives: 30 mm x 30 mm HYDRAULIC PUSHER SHREDDER EQUIPPED WITH AUTO-REVERSING FUNCTION V-rotor Screen: 12 mm and 10 mm Rotor speed: 90 rpm Discharge outlet diameter: 200 mm Pusher height: 175 mm Ledpogxuvtofx Abrjhc Dimensions (L x W x H): 230 x 140 x 160 cm Weight: 1400 kg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), galia: 30 kW (40,79 AG), bunkerio talpa: 800 l, darbinis plotis: 800 mm, Slow-speed shredder, 800 x 1000 mm feed hopper, 30 kW motor, hydraulic pusher, Lhjdewzg Taepfx Abrsc reversible knives

Sąlyga: naudotas, Several conveyor belts and order picking belts from Knapp in various sizes are available for sale. Manufactured by Knapp Belt length: 8,900 mm Travel speed: 30 meters per minute Height adjustable, currently set at 800 mm Belt width: 280 mm Channel width: 320 mm Lodpfx Ajuf S A Robrehc Total width: 380 mm Belt material: rubber fabric, slightly ribbed lengthwise. Frame made of powder-coated steel Drive: SEW-Eurodrive geared electric motor Power: 0.37 kW, 50 Hz, 400 V

Sąlyga: geras (naudotas), Gamybos metai: 2020, Rotor diameter: 260 mm Feed opening approx. 800 x 1200 mm Ledpfewzaizjx Abrjhc Rotor length approx. 800 mm Motor: 18.5 kW Technical data available on request Required space approx. 2050 x 1550 mm All information without guarantee