Lygiagrečios tekinimo staklės

WEILER PRIMUS

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus tekinimo staklės puikios būklės. Galima apžiūrėti prijungus prie elektros. Techniniai duomenys: Atstumas tarp centrų: 450 mm Centro aukštis: 120 mm Veleno skylė: 23 mm Sukimosi greitis: 30 – 3000 aps./min. Galinis centras: MK 2 Variklio galia: 1,5 kW Svoris: 350 kg Pjdpfx Asxzi I Dofwjrd Matmenys: 1200 x 650 x 1550 mm

Sąlyga: paruoštas naudoti (naudotas), Weiler Primus tekinimo staklės Tikslumo tekinimo staklės su priedais Weiler Primus tekinimo staklės: Centro aukštis: 125 mm Sūkių diapazonas: 40–3000 aps./min Centro atstumas: 400 mm Špindelio anga: 24 mm Prjdpfx Ajxw R N Uofwed Priedai: 35 vnt. spaustuvinių taurių Žandikaulinis griebtuvas 4 vnt. Multifix laikikliai Priedų spinta Papildoma įranga – žiūrėkite nuotraukas Kviečiame atvykti apžiūrėti staklių vietoje. Taip pat galime padėti suorganizuoti ekonomišką transportavimą per ekspedicijos įmonę! Jūs gausite sąskaitą faktūrą. Užsienio klientams galima išrašyti sąskaitą be PVM. Būtina turėti galiojantį PVM mokėtojo kodą. Parduodama su galimybe parduoti kitam. Apsilankykite mūsų parduotuvėje ir peržiūrėkite kitus mūsų pasiūlymus. Nurodyti prekių ženklai ir įmonių pavadinimai priklauso jų savininkams ir naudojami tik produktų identifikavimui bei aprašymui. Techninių duomenų neatitikimai ar aprašymo klaidos galimi ir pasiliekami.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Prsdpsu Aftgofx Afwod Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 (MT 2) >> Feeds: 0.03 to 0.15 mm/rev >> Available threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A quick-change tool post with 3 holders >> Stop >> Change gears About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is highly user-friendly and can produce surface finishes comparable to grinding. You are welcome to inspect the machine under power on site to verify its condition.

Sąlyga: labai geros būklės (naudotas), WEILER PRIMUS tipas MD-G - Centrų aukštis: 125 mm - Atstumas tarp centrų: 400 mm - Sukimosi greičio diapazonas: 40–3000 aps./min - Špindelio skersmuo: 24 mm - Elektrinis griebtuvo apsaugos įtaisas - Multifix su įdėklais - Galinė atrama su gręžimo cilindru - Keturių žandikaulių griebtuvas - Darbo šviestuvas - Staklių lovos ribotuvas - Dokumentacija Psdpfx Aexw H Dbsfword Matmenys: Ilgis x plotis x aukštis: 1,3 x 0,8 x 1,6 metro / Svoris: 450 kg Galimi netikslumai ir įvedimo klaidos.

Sąlyga: naudotas, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and facing Chuck flange: Short taper DIN 55022 size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox ranges - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change toolholder with 1 changeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centre point for collet chuck - Emergency stop - Hinged chuck guard - Splash guard panel - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H: 1200 x 900 x 1560 mm Predpfxjrtd Uwo Afwod Weight: 520 kg Good condition

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Speed range: 60 - 3,000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Equipment and Accessories: >> 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets Prjdpfxsvtp Eds Afwod >> Multifix size A with 3 tool holders >> Stop >> Electric spindle guard About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to view this machine under power on-site and see its condition for yourself.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus GS Lead and Feed Screw Lathe in Very Good Original Condition!!! Technical Data: >> Year of manufacture: approx. 1992 Machine No. 4549 >> Centre height: 120 mm >> Centres distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle head DIN 4 >> Tailstock taper: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Prjdpowkh Abefx Afwjd Accessories and Equipment: >> Collet chuck set - new collets, new from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix toolpost system size A with 2 tool holders About the Machine: For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The bedways are in very good condition. Even at high spindle speeds, the Weiler runs very quietly. The Primus was used in a training facility. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. You are welcome to view and test the machine under power on site to convince yourself of its condition.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus GS Lead and Feed Screw Lathe with 3-axis Digital Readout Easson-ES8 from Training Workshop – Excellent Condition! Technical Data: - Year of manufacture: approx. 1990, Machine No. 3768 - Centre height: 120 mm Pjdpfxjvkfhps Afword - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm, 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock taper: Morse 2 (MK2) - Feeds: 0.03 to 0.15 mm/rev - Capable of cutting metric, imperial, module, and diametral pitch threads - Metric thread pitches from 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Features: - 3-axis digital readout by Easson ES8 - Collet system from 1 to 20 mm, collets increasing by 1 mm increments, with chuck and draw tube - 1 three-jaw chuck with 2 sets of jaws - 1 four-jaw chuck with 2 sets of jaws - Multifix tool post, size A, with 3 tool holders - Bed stop - Faceplate turning attachment About the Machine: For sale is a Weiler Primus lead and feed screw lathe built approx. 1990, in excellent condition. The machine is, of course, fully functional. The carriage moves very smoothly and evenly. The bed guides are in a very good condition. The lathe runs quietly, even at high speeds. The machine comes from a large company's training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the creation of ground-like surface finishes. Take advantage of the opportunity to inspect the machine on site under power and convince yourself of its condition.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm Prjdpfovivmyex Afwod >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm in 1 mm steps, new About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages move smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced to a near-ground finish. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Weiler Primus VC Precision Centre Lathe with 3-Axis Digital Readout K&C NEW with VC Drive, Infinitely Variable Spindle Speeds and CE Certified, in Very Good Condition Technical Data: >> Year of manufacture: 2003 Machine No.: 646 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 800 kg >> Switchable spindle brake >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: Psdpfx Afjw Idlljwsrd >> 3-axis digital readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A quick-change tool post with 2 holders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: Offered is a Weiler Primus VC lead and feed screw lathe, year 2003, in very good original condition. This is a very well maintained lathe with VC drive and infinitely variable speed of the work spindle. The K&C digital readout and linear scales are brand new. This newer generation of Weiler lathes is very user-friendly and enables the production of ground-like surface finishes. The K&C digital readout makes working even easier and more precise. Take the opportunity to inspect this machine under power on site and see the condition for yourself.