WEILER - tekinimo staklės

WEILER Matador VS 2

Būklė: paruoštas naudoti (naudotas), Tekinimo ilgis 500 mm Didžiausias tekinimo skersmuo virš lovio 297 mm Didžiausias tekinimo skersmuo virš atramos 160 mm Veleno anga 36,0 mm Tvirtinimas DIN 55022 Gr. 5 Pinolio kūgis: MK 3 Pinolio eiga 90,0 mm Sukimosi greitis 30–3550 aps./min Variklio sūkių skaičius: 1410 / 2830 aps./min Bendras galingumo poreikis 3,3 kW Įtampa 380 V Staklių svoris apie 620 kg Matmenys I-P-A 1420 x 700 x 1200 mm Iš profesinės mokyklos – labai gera būklė (!!) Ypač tinka vidutinio tikslumo tekinamiems ruošiniams Įranga: - tvirta universali tekinimo staklė su kreipiamąja ir traukiamąja sraigtine - RÖHM trijų žandikaulių tekinimo griebtuvas Ø 160 mm - atverčiamas tekinimo griebtuvo apsaugas - griebtuvo raktas - MULTIFIX A tipo greitaeigė įrankių galvutė su 3 naujais įdėklais - perkeliama plunksna - pasukama staklių lempa Nwsdpexq Hhyefx Abzeh - valdymo pultas, priekyje kairėje - automatinės išilginio ir skersinio atramos pastūmos - staklių pagrindas su spintele (daiktų laikymui) - drožlių ir aušinimo skysčio apsauginė nugarėlė - avarinio stabdymo mygtukas - naudojimo instrukcija

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Matador VS-2 Lead and Feed Screw Lathe with Heidenhain ND 780 3-Axis Digital Readout from Training Workshop!! Technical Data: >> Machine No. 7702, Year of manufacture: approx. 1990 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 12 mm >> Brake motor >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout Heidenhain ND 780 >> Quick clamping device, internal and external collets (see photo) >> 1 pc 3-jaw chuck, 3 sets of jaws Nwsdpfx Asy T Hqcsbzsh >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc bed stop >> Change gears >> Machine feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides run smoothly and evenly. Even at high spindle speeds, the Weiler operates quietly. The lathe was originally located in a training workshop. The machine comes with a comprehensive range of accessories. Take the opportunity to inspect the machine under power on site and convince yourself of its excellent condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from Elesta, ex-training workshop! Technical Data: - Machine No.: 88-8115, Year of manufacture: 1988 - Centre height: 140 mm - Distance between centres: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock Nwedpfx Aoy Tmkvsbzjh - Tailstock: MT 3 - Feeds: 0.012 to 0.9 mm/rev - Thread types possible: Metric, Inch, Module, and Diametral Pitch - Metric thread pitches: 0.25 to 12 mm - Brake motor - Weight approx. 700 kg - Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Features: - 3-axis Elesta digital readout - Rapid clamping device for internal and external collets (see photo) - 1 set 3-jaw chuck with a set of jaws - Multifix size A with 3 tool holders - Spindle guard - 1 bed stop - Change gears - Travelling steady rest - Machine feet About the Machine: We are offering a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. The slides all run smoothly and evenly. Even at high speeds, the Weiler runs quietly. The machine was originally located in a training workshop. It comes with extensive accessories. Take the opportunity to inspect this machine under power on-site and see for yourself its excellent condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS-2 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C in Special Light Grey Paint Finish!!! Technical Data: >> Machine No.: 92-027, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3,550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: Nwodsyylq Uspfx Abzjh >> 3-axis digital readout from K&C (new), includes 12-month manufacturer's warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming (200 entries), taper calculation, radius/diameter display, quick zeroing, counting direction switching >> 1 x 3-jaw chuck, 1 set of jaws >> 1 x 4-jaw chuck, 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the Machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and equipped with protective covers to guard against dirt. All slides run smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C, NEW, in special light gray paint! Technical Data: >> Machine No. 92-029, Year of Manufacture: 1992 >> Center Height: 140 mm >> Distance Between Centers: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with Bayonet Lock >> Tailstock MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible Threads: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, with 12-month manufacturer’s warranty and operating manual Nwjdeyylqhepfx Abzeh Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter, quick reset to zero, counting direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the Machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly repainted in light gray. A very attractive machine. The 3-axis digital readout from K&C was retrofitted. All the scales are new and have been equipped with protective covers to prevent contamination. All slides move smoothly and evenly. Take the opportunity to inspect the machine under power on site and convince yourself of its condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS-2 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C, Special Light Grey Paint Finish!!! Technical Data: >> Machine No. 92-028 Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with Bayonet Lock >> Tailstock Taper: MK 3 >> Feeds: 0.012 to 0.9 mm/rev Nwedpeyyb T Sefx Abzoh >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitch: 0.25 to 12 mm >> Weight: approx. 700 kg >> Dimensions (L x H x D): 1.4 m x 1.2 m x 0.55 m Accessories and Features: >> 3-axis digital readout by K&C - brand new, 12 months manufacturer's warranty, with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 positions, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 x 3-jaw chuck with 1 set of jaws >> 1 x 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A toolpost with 2 tool holders >> Motor brake >> Bed stop About the machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly repainted in light grey. A truly attractive machine. The K&C 3-axis digital readout has been retrofitted. All scales are new and come with protective covers to guard against dirt. The slides run smoothly and uniformly. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Būklė: naudotas, Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS2 tekinimo staklė, pagaminta 1992 m., trijų žandikaulių griebtuvas, Multifix, galinis apsauginis skydas nuo drožlių, elektrinė griebtuvo apsauga. Staklės geros, paruoštos naudoti būklės, po susitarimo galima parodyti veikiant. Nwsdex Sqvgjpfx Abzeh