Ciklo valdomas tekinimo staklės

Weiler E50 x 1000

Būklė: geras (naudotas), Gamybos metai: 2014, Spindle speeds: 170 – 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> Control system retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data – Grinding diameter: 20 – 300 mm --> Swing diameter: 350 (500) mm --> Workpiece length: 300 (1,300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min --> Grinding stroke speed: 0 – 9.99 m/min --> Infeed speed: 0 – 99.99 m/min --> Step infeed value during reversal: 0 – 0.999 mm Dkjdpfxew Intas Af Aol --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min / revolution --> Grinding stroke speed: 0 – 5 m/min / revolution --> Infeed speed: 0 – 99.99 m/min / revolution --> Step infeed value during reversal: 0 – 0.999 mm / Ø --> Swiveling capability of the workpiece spindle head: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Traverse speed: 5 m/min --> Center height above workpiece table: 200 (300) mm --> Center height above grinding table: 330 (430) mm --> Workpiece spindle bore: 50 (70) mm --> Original year of manufacture: 1988

Būklė: geras (naudotas), Gamybos metai: 2000, Turning diameter: 340 mm Turning length: 2000 mm Control system: FAGOR 8055 Swing diameter: 550 mm Spindle bore: 108 mm Spindle speeds – stepless: 2500 rpm Drive power: 16.5 kW Quill stroke: 220 mm Quill diameter: 100 mm Total power requirement: 19 kW Machine weight approx. 4300 kg Dedpovwgpbofx Af Aekl Space requirement approx. 4300 x 1600 x 1800 mm This EMCO E 300x2000 cycle lathe is offered including complete accessories. Description: - Coolant system - 1 open steady rest, 20–145 mm - 1 closed steady rest, 15–185 mm - 1 faceplate - 1 three-jaw chuck - 1 bar chuck, D=400 mm - Parat 4-position toolholder - Various toolholders

Gamybos metai: 2000, būklė: naudotas, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight approx. 5500 kg Space requirement approx.: m (not specified) WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000, but continuously serviced and calibrated by manufacturer Axis configuration: - Y-axis as long-travel measuring bridge: 1,600 mm - X-axis as measuring head carriage (cross travel): 1,000 mm - Z-axis as vertical measuring quill: approx. 800 mm Maximum workpiece weight / table load: approx. 2,250 kg Clearance under measuring bridge: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Features / Accessories: • Measuring table, crossbeam, and quill made from dark natural hard stone; table with 6 x 9 threaded holes for workpiece/fixture clamping • All axes are air-bearing for smooth, virtually wear-free operation; equipped with incremental scales, 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW31.351 built into worktable (controller replaced approx. 3 years ago) • WENZEL measurement software METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments), probe head model PH 10 M plus, with TP 20 probe and various probe accessories • RENISHAW probe head controller unit type PHC 10 C-3 plus, also built into the worktable • Automatic probe changer, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with infinitely variable travel speeds • Sphere standards for table setup, work table, various clamping devices, etc. Condition: Very good – generally in stock, powered for inspection. Ready for demonstration. Disassembled by a CMM specialist at the seller and reassembled here. Delivery: Ex-stock – as is, as inspected Dodpfx Afst Hw Nye Aekl Payment: strictly net – upon receipt of invoice.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus,

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 690 mm, veleno skylė: 150 mm, tekėjimo skersmuo: 1 040 mm, tekinimo skersmuo virš viršutinio vežimo: 690 mm, centro aukštis: 500 mm, plotis centre: 2 000 mm, veleno greitis (maks.): 5 000 aps./min, X ašies eiga: 160 mm, Z ašies eigos atstumas: 380 mm, strypo praėjimas: 55 mm, Centre height: 500 mm Distance between centres: 2,000 mm Maximum turning diameter On cross slide: 690 mm Over bed: 1,040 mm In gap: 1,070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of faceplate: 320 mm Dkedpfx Afsyhhuwe Aol CARRIAGE Bed guide length: 1,020 mm Cross slide travel: 640 mm Top slide travel: 360 mm SPINDLE Spindle nose: ASA 15'' Spindle bore diameter: 150 mm Front bearing size NN: 200/310/82 mm Rear bearing diameter NNU: 190/260/69 mm Internal Morse taper in reduction bush: No. 6 Spindle speeds: 24 Speed range: 4–800 rpm THREAD CUTTING Number of thread types: 398 Metric threads: 0.5–224 mm Module threads: mod. 0.25–11 Whitworth threads: tpi 56–1/8 Diametral pitch (DP): 112–1/4 FEEDS Number of feeds: 108 Longitudinal, cross, and top slide feeds: 0.05–22.4 mm/rev RAPID TRAVERSE Longitudinal, cross, and top slide rapid traverse: 2,500 mm/min Longitudinal return: 5,000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Steady rest passage over bed: 140–500 mm Steady rest passage over carriage: 40–350 mm ADMISSIBLE WEIGHT Overhung: approx. 1,500 kg Between centres without steady rest: approx. 5,000 kg Between centres with steady rest: approx. 6,000 kg Machine weight: approx. 7,800 kg

Būklė: naudotas, Gamybos metai: 1998, Tekinimo skersmuo virš lovos: 400 mm Tekinimo skersmuo virš stumdomosios atramos: 260 mm Tekinimo ilgis: 1500 mm Centras aukštis: 200 mm Atstumas tarp centrų: 1500 mm Veleno skylė: 50,8 mm Sukimosi greitis: 20–3150 aps./min Išilginės slankiosios atramos pastūmos: 0,01–3,24 mm/aps. Skersinės slankiosios atramos pastūmos: 0,005–1,62 mm/aps. Staklių svoris: apie 2 t Užimama erdvė: apie 3,35 x 1,4 x 1,9 m Darbinė įtampa: 400 V Prisijungimo galia: 7,7 kVA Djdpfx Asxp Rzbjf Aekl Su griebtuvu, Multifix ir skaitmeniniu indikatoriumi.

Būklė: naudotas, Gamybos metai: 1998, Techninės detalės: Sukimosi skersmuo virš lovos: 600 mm Sukimosi skersmuo virš atramos: 400 mm Sukimosi ilgis: 2000 mm Centro aukštis virš atramos: 300 mm Centro atstumas: 1600 mm Sukimosi greičiai: 3 - 2.500 aps./min Grąžto laikiklio kūgis: MK 5 Pagrindinio veleno anga: 62 mm Pinolio eiga: 190 mm Išilginiai padavimai: apie 0,001–10 reguliuojamas mm/aps. Skersiniai padavimai: apie 0,001–5 reguliuojamas mm/aps. Greitasis padavimas X ašyje: iki 5000 m/min. Dkodpow Rkt Ijfx Af Asl Bendras galios poreikis: 40 KVA Mašinos svoris apie: 5,6 t Mašinos matmenys (IxPxA): apie 4,0 x 2,0 x 1,9 m Įskaitant priedus, žr. nuotrauką *

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 8 000 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 750 mm, tekėjimo skersmuo: 330 mm, veleno skylė: 41 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 1 aps./min, ašies variklio galia: 11 000 W, quill skersmuo: 50 mm, plunksnos brūkšnys: 110 mm, tekinimo skersmuo virš slankiojančio stalo: 435 mm, bendras svoris: 1 400 kg, centro aukštis: 165 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, For sale: cycle-controlled WEILER E30x750 CNC lathe with Siemens 810 D control system. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Condition: good, fully functional Location: Austria (Graz) Inspection: on site or by video call upon arrangement Photos/Video: Additional photos and videos of the machine in operation available upon request. Power-on hours (machine powered): 26,492 h. Operating hours are significantly lower. Based on experience, actual spindle runtime (turning operation) generally accounts for only about 30% to 50% of this (i.e., approx. 8,000 to 13,000 hours). Technical Specifications: Working area: Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 160 mm Centre distance: 750 mm Spindle: Dkodevphv Tspfx Af Ael Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter at front bearing: 70 mm Max. spindle torque: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speed ranges: stepless Feed / rapid traverse Feed drive: Three-phase AC feed drives Feed range (stepless): longitudinal: 0.001–50 mm/rev (Note: additionally specified 0–20 mm/rev) cross: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N cross: 3,000 N Max. rapid traverse speed longitudinal/cross: 8 / 4 m/min (Note: also specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 TPI Tailstock / quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1,800 × 1,350 × 1,700 mm Interested? Contact us for further information or to arrange an inspection appointment.

Būklė: naudotas, CNC cycle-controlled lathe HARRISON Type Alpha 400 Plus Mach. No. P30180/150 Year of manufacture: 1998 Centre distance 1250 mm Swing over bed 400 mm Centre height 200 mm Swing over cross slide 245 mm Max. turning diameter in gap 585 mm Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock taper MK 5 Spindle bore 54 mm Spindle nose size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Level 1): 15-275 rpm Spindle speed range (Level 2): 35-795 rpm Spindle speed range (Level 3): 110-2500 rpm Feed rate X and Z: 0.03 - 0.6 mm/rev. Rapid traverse X-axis max. 2000 mm/min. Rapid traverse Z-axis max. 4000 mm/min. Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power 7.5 kW Electrical connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC - Language in French (France) - Automatic 3-range gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with various transmission ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX quick-change toolholder size B with 2 tool inserts - 1 live center - 1 quick-action drill chuck RÖHM, 3-16 mm - Hinged chuck guard - Hinged working area safety doors - Swarf tray with coolant device beneath the machine bed Dodpfx Afoh Hvk As Askl - Control cabinet fixed to the machine - RS 232 interface Required space (L x W x H) 2600 x 1450 x 1550 mm Weight 1950 kg Good condition

Būklė: geras (naudotas), Gamybos metai: 1995, CNC ciklinis tekinimo staklės MONFORTS KNC 6, pagaminta 1995 m., valdymas Monforts MTC K. Centrinis atstumas: 2000 mm. Maksimalus tekinimo skersmuo virš lovos: 630 mm. Maksimalus tekinimo skersmuo virš skersinio slydiklio: 380 mm. Veleno sūkiai: 2–1800 aps./min. Veleno variklis: 21/15 kW. Veleno skylė: 71 mm. Trijų žandikaulių FORKARDT 400 mm griebtuvas. Įrankių laikiklis Multifix C dydžio su 3 įrankinėmis. Matmenys: ilgis 4000 mm, plotis 2200 mm, aukštis 1900 mm. Svoris apie 5000 kg. Yra visa mašinos dokumentacija. Įrenginį galima demonstruoti prijungus prie tinklo. Dkedpfx Afohktd No Ael