Tekinimo staklės - valdomos pagal ciklą

WEILER E50 - 2000

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Lsdpfx Aaorn Riqs Tsai Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Sąlyga: geras (naudotas), Gamybos metai: 2007, Ranka parodytos dalys nepridedamos. Ljdpfxsvm Hgre Aa Teai

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, veleno skylė: 83 mm, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 570 mm, tekinimo skersmuo virš viršutinio vežimo: 340 mm, quill skersmuo: 80 mm, šilko eigos atstumas: 200 mm, bendras svoris: 3 200 kg, įvorės išorinis skersmuo: 250 mm, Įranga: sūkių greitis be galo kintamas, The machine is in very good condition. Available immediately! Ljdpfxowxw S Io Aa Toai Can be tested under power.

Gamybos metai: 2017, Sąlyga: paruoštas naudoti (naudotas), Laser power: 10 kW (10,000 W), working area: 3000 mm x 1500 mm, max. material thickness: mild steel: 25 mm, stainless steel: 30 mm, aluminum: 30 mm, copper: 12 mm, brass: 15 mm. Positioning speed: 120 m/min, positioning accuracy: +/-0.05 mm, max. workpiece weight: 1,100 kg. Machine dimensions (X/Y/Z): approx. 9500 mm / 3500 mm / 3500 mm, extraction unit dimensions (X/Y/Z): approx. 1500 mm / 1500 mm / 4000 mm, machine weight: approx. 12,000 kg, operating hours: approx. 17,000 h. Documentation available. On-site inspection possible. Expected to be available from June 2025. Lodpfsvyiqgox Aa Tjai

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8044000703A, Siemens 840 D Control Country of Manufacture: EU - Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip pan) 4228x2260x1775 mm (with chip conveyor) Net Machine Weight: 3,400 kg TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Working Capacity Maximum swing over bed: 330 mm Swing over cross slide (X): 260 mm Maximum turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Center height: 190 mm Distance between centers: 581 mm Feed Drive Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C Axis with Siemens Control Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing inner diameter: 100 mm Spindle bore: Ø 74.3 mm Max bar capacity: 51 mm Main Drive with Siemens Control Drive power (40% / 100% DC): 16.5 / 11 kW Torque (40% / 100% DC): 166.5 / 112 Nm Max speed: 5,000 rpm Tool Turret Number of tool stations: 12 Tool holder: DIN69880 (VDI 3425) Cylinder diameter: 30 mm Tool change (with lock): 0.95 sec Tool change (without lock): 0.4 sec Live Tool Turret with Siemens Control Number of driven tools: 12 Drive power (40% DC) at 4,000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Travel, automatic: 396 mm Quill bore: flange Max quill axial force: 400 daN Hydraulic unit Tank capacity: 50 L Max pressure: 50 bar Coolant System Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow at 5 bar: 30 L/min Electrical Connection Max power requirement: 21 kVA Voltage: 400V Frequency: 50–60 Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental Conditions Ambient temperature: +15 to +35°C Max humidity: 75 % Lodpow T Sqysfx Aa Toai Unless otherwise stated, the technical specifications are provided without guarantee.

Sąlyga: naudotas, Gamybos metai: 2015, Technical details: X-travel: 960 mm Y-travel: 600 mm Z-travel: 480 mm Rotary table: Ø 350 mm Table load capacity: 200 kg Spindle speeds: 12,000 rpm Lajdpfx Asrm Txboa Toi Spindle drive power: 14/10 kW Control: HEIDENHAIN iTNC 530 Rapid traverse: 32 / 32 / 24 m/min Tool changer: 30 positions Spindle taper: BT 40 Machine weight approx.: 7.4 t Total power requirement: 45 kVA Space required approx.: 3.1 x 2.3 x 3.1 m 5-axis simultaneous universal machining center, NC rotary-swivel table Ø 350 mm, A-axis (+120°/-42°), C-axis 360°, Internal coolant supply (IKZ), Electronic handwheel, Chip conveyor, Direct measuring system, Counter readings: approx. 9,000 power-on hours, approx. 3,500 spindle hours

Sąlyga: geras (naudotas), Gamybos metai: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year of manufacture: 2018 Only approx. 1,000 spindle hours since spindle replacement Total machine hours: approx. 20,500 2024: Spindle replaced (18,000 rpm) 2024: Geometry newly set. Lasdpfx Aaswz I Acs Tsi Travels: X 650 / Y 850 / Z 500 mm Rotary table: 360° continuous Controller: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle taper: HSK-A63 Machine equipped as follows: - 60-position tool changer - ICS (internal coolant supply, 20 bar) with band filter system - Air through the spindle - Kessler rotary table, diameter 500 mm - Infrared workpiece measurement - 3D probe - Tool measurement via BLUM laser - Rotating sight glass - POS DCM collision module - Mobile electronic handwheel - Oil mist extraction unit - Heidenhain linear measuring systems X, Y, Z - Sealing air for all linear measuring systems - Active electrical cabinet cooler (air-to-air) - Active cooling for 4th and 5th axes, controlled - Network connection + USB port - Regulated spindle chiller - Heidenhain rotary measurement system - Contour protection POSkontur - Exterior hinge-belt chip conveyor - Coolant supply pump at head controlled via M functions - Pump for chip flushing device - Chip flushing device - Machine status beacon - Air at the spindle - Oil/coolant separator, electromechanical - Automatic coolant level monitoring - Triple media interface in table center - Hydraulic unit incl. control via M function Connected load: 60 kVA Installation dimensions: W: 4,800 / D: 4,600 / H: 3,000 mm + ICS unit (LxWxH): 2,200 x 1,300 x 1,400 mm Weight: approx. 13,000 kg The machine is in excellent condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry set (guides repaired and adjusted). Since then, the machine has seen only limited production usage.

Sąlyga: naujas, Welding positioners increase work flexibility, productivity, and quality. Positioners also assist the welder during operations, ensuring a safe working environment and improved ergonomics. Lajdpfx Aasg Urz Hs Tei The main advantage of PEMA positioners is that workpieces can always be set to the optimal welding position. This enables welding productivity to be increased by up to 70%. 50 years of productive and high-quality welding – for half a century, we have been designing and manufacturing welding positioners for demanding and heavy workpieces. Pemamek's welding positioners combine modern design with reliable, efficient technology and can be seamlessly integrated into any other PEMA solution. Each of our welding positioners is designed in-house and manufactured using high-quality components. We are the official PEMA representative for Southern Germany. We still have several APS-series tilting positioners (previous generation) in stock. The latest APSI-series (new generation) models are also already available from stock.

Sąlyga: naudotas, Gamybos metai: 2014, Parduodamas 1 CNC tekinimo staklės Spinner TTC 300, pagaminimo metai 2014, įskaitant vienos strypo padavėją. Staklės labai geros būklės, reguliariai prižiūrėtos ir paruoštos nedelsiant naudoti. Lsdpfx Aaow Rbb As Toai

Sąlyga: naudotas, Gamybos metai: 2022, Sheet width: 1550 mm Sheet thickness: 4 mm Bending steps: 6 Total power requirement: 2.2 kVA Approx. machine weight: 1.42 t Approx. space requirement: 2.7 x 0.75 x 1 m Rolling feed: 3.5 m/min Laedpfx Aaot Hmlqj Toi Motorized plate bending machine Working width: 1550 mm Material thickness up to 4 mm Roller diameter: 140 mm Rolling speed: 3.5 m/min Heavy-duty steel welded construction Driven top and clamping rolls Swiveling upper roll Manual adjustment of clamping and side rolls Roll drive via powerful electric motor and gearbox Wire grooves on the clamping roll Safety device: emergency stop cable With mobile control panel and foot pedal Equipment details: Swiveling upper roll Control panel with digital display and manual operation (option) RBM 2050-30 E PRO optionally with motorized side roll adjustment and digital display for side roll Maximum bending capacity, steel 400 N/mm²: 4.0 mm Maximum conical bending capacity, steel 400 N/mm²: 2.0 mm Maximum bending capacity, stainless steel: 3.0 mm Maximum conical bending capacity, stainless steel: 1.5 mm Maximum bending capacity, aluminum: 4.8 mm Maximum conical bending capacity, aluminum: 2.4 mm Minimum bending diameter: 210 mm Rolling speed: 3.5 m/min