Centro tekinimo staklės

WEILER Condor AC Stufenlos

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW) Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: - Machine No. 90-1495 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feed rates from 0.015 to 0.46 mm/rev - Possible threads: Metric, Imperial, Module and Diametral Pitch - Metric thread pitches from 0.18 to 28 mm - Weight approx. 1100 kg - Spindle brake engageable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: - 3-axis digital readout by K&C, new, with 12 months manufacturer warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving function, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal, - Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments - 160 mm 3-jaw chuck with two sets of jaws, NEW - Multifix quick change toolpost, size A, with 2 new tool holders - Bed stop - Electric chuck guard, NEW - LED machine lamp, NEW - Rear splash guard - Operating manual - Coolant system - Machine feet Ljdpovambcofx Af Iehb About the machine: Offered is a Weiler Condor B lead and feed screw lathe, geometrically overhauled and in as-new condition. The guideways have been reground or newly hand-scraped. Supplied with a certified inspection protocol. A very attractive machine with electronic spindle protection. The accessories — collets, chuck, and Multifix — are new. Spindles, nuts, bearings, belts, and wipers have been renewed. You are welcome to inspect this machine under power at our premises and see its condition for yourself.

Sąlyga: labai geros būklės (naudotas), Bore diameter: 1.5 - 165 mm Stroke: 80 - 160 mm Spindle speeds: 200 - 2500 rpm Stroke speed - under load: 80 - 310 strokes/min Total power requirement: 0.9 kW Machine weight: approx. 0.6 t Space requirements: approx. 1.2 x 1.0 x 1.6 m Precision cross-honing machine with automatic measuring control Lsdpfjwva Rnex Af Iohb Includes: workpiece holders, small measuring table, digital dial gauge, tool accessories,

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3595, Dear Sir or Madam, Lhedpfethd Shex Af Iob For sale is a Weiler Commodor B lathe from year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings as well as the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible threads: Metric, Imperial, Module, Diametral-Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, removable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can carry out a complete or partial overhaul of the selected machine - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further accessories, such as safety equipment - We are happy to take care of shipping and/or installation

Sąlyga: naujas, Bernardo Universal Lathe Master 360 Pro Centre Distance: 1000 mm Centre Height: 180 mm Swing over Bed: 360 mm Swing over Gap*: 502 mm Swing over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1-5 Spindle Speed Range (8): 70 - 2000 rpm Longitudinal Feed Range (32): 0.052 - 1.392 mm/rev Cross Feed Range (32): 0.014 - 0.380 mm/rev Metric Threads (26): 0.4 - 7.0 mm Imperial Threads (34): 4 - 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Stroke: 100 mm Tailstock Taper: MT 3 Rated Motor Power S1 100%: 1.5 kW (400 V) Motor Power Consumption S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1825 x 750 x 1600 mm Weight approx.: 576 kg *Removable Gap Bed Length: 205 mm Lhedpfx Aed I H Izef Ijb Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, per DIN 55029 • Fixed steady rest – max. workpiece diameter 70 mm • Travelling steady rest – max. workpiece diameter 60 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 280 mm • Four-way tool post • Safety guard for four-way tool post • Safety slip clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) • Motor with electromagnetic brake (CE compliant) • Base with drawers • Operating tools

Sąlyga: naudotas, Gamybos metai: 2016, Overview Lodjtz H T Depfx Af Ijhb This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition, and shows only minimal signs of use. The plant is still installed and connected, and can therefore be inspected in person at any time. Technical Data - Capacity: 60 bags/minute - Doypack/flat pouch formats: 20/25g, 50g, 300g, 500g, 750g - Capability for micro-dosing of powders - Modern wide zipper/belt Scope of Delivery - Doypack packaging machine | Volpak | SI-280 F1 - Multihead weigher | Ishida | CCW-RV-228-S/05-SS - 4 raw material discharge stations - Lindor mixer - Cox & Plant dosing system between discharge stations, mixer, and multihead weigher - Ishida x-ray inspection system with reject, IX-GA-4075 - Ishida dynamic checkweigher with DACS-G-S0 reject - System for the injection of nitrogen or another inert gas, including a metering system - Dust extraction system - Euro hole punch - Smooth sealing system

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Condition of the machine is very good, it has performed only 123,000 operations. CNC-controlled automatic machine, designed for processing welded frames. Independent drive and control system. Lhedpfxem Ak R Uj Af Iob Multiple use of the same processing time Operates in a welding and cleaning line Does not require additional floor space in the hall Can be adapted to work in a sash production line All operations are performed during the cooling phase: drainage vent grooves vent holes in colored profiles drilling of frame for mullion connector drilling of holes in the frame for hinges (x6) The center has its own frame transportation system from welder to cleaner SPS, NC control User-friendly visualization

Gamybos metai: 1988, Sąlyga: naudotas, Voest Alpine DA 160 lathe, year of manufacture 1988, equipped with three-jaw chuck and Multifix quick-change tool post. Machine can be demonstrated under power by prior arrangement. Lsdpfx Afema Snxj Ishb

Sąlyga: geras (naudotas), Atstumas tarp centrų: 450 mm Centro aukštis: 120 mm Velena anga: 23 mm Sukimosi greitis: 40 – 3000 aps./min. Bežingsnis pavara su 3 pavarų žingsniais ir skaitmeniniu greičio indikatoriumi Galinis centras: MK 2 Pavaros galia: 1,5 kW Lhjdew I A Uxjpfx Af Ijb Svoris: 350 kg Matmenys: 1200 x 650 x 1330 mm Dažymas: Resedos žalia RAL 6011 Skaitmeninis rodmuo: Pageidaujant už papildomą kainą Priedai: Papildomi priedai pagal užklausą

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1994, spaudimo jėga: 80 t, Įranga: apsaugos šviesos užtvara, Manufacturer: Amada Model: ITS 80-25 Lsdpsvncifsfx Af Ijhb Year of manufacture: 1994 Pressing force: 80 t Bending length: 2500 mm Throat depth: 400 mm Stroke: 100 mm Power: 9.5 kW Overall dimensions: 3010 x 2230 x 2230 mm Weight: 4,950 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 330 mm, veleno skylė: 78 mm, tekinimo skersmuo virš slankiojančio stalo: 520 mm, centro aukštis: 260 mm, tekėjimo ilgis: 1 000 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 68 mm, bendras ilgis: 2 160 mm, bendras plotis: 810 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 20 aps./min, lovos plotis: 300 mm, bendras svoris: 1 810 kg, quillo laikiklis: MK 4, Įranga: sūkių greitis be galo kintamas, Centre height: 260 mm Centre distance: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Lhodpfeh Rvxhjx Af Iob Spindle speed range: 20–2000 rpm Drive power: 7.5 kW Equipment includes, among others: - Infinitely variable speed control - Hardened and precision-ground Z-axis guideways - Turcite-coated counter surfaces on the tool and cross slides - Manual central lubrication with one pump for longitudinal and cross slide - Complete coolant system with rear splash guard and splash guard on the slide - Chuck guard - Shift bar with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine leveling pads