Centro tekinimo staklės

WEILER Commodor B

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe from year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings as well as the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Iodpfxsthd She Af Ijht Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible threads: Metric, Imperial, Module, Diametral-Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, removable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can carry out a complete or partial overhaul of the selected machine - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further accessories, such as safety equipment - We are happy to take care of shipping and/or installation

Sąlyga: geras (naudotas), Gamybos metai: 1992, Fully automatic bandsaw, manufacturer: JAESPA, type: W400 AZ Control: Minipos 807, year of manufacture: 1992 Ihsdpegf H Sajfx Af Iot Maximum cutting diameter (round material): 400 mm Saw band dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Required space: 2.8 x 2.8 x 2 m

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 56 mm, centro aukštis: 180 mm, plotis centre: 1 000 mm, Dear Sir or Madam, For sale is a Weiler Commodor B lathe equipped with a new 3-axis digital readout from K+C (incl. 12 months manufacturer's warranty). The machine undergoes an extensive partial overhaul in our workshop, ensuring it is in excellent technical, geometric, and optical condition. You are welcome to visit us onsite and see for yourself. Availability: on request Center height: 180 mm Center distance: 1,000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2,000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Further equipment and accessories: new 3-axis K+C digital readout, coolant system, chuck guard, pull-out chip tray, operating manual, and more accessories available on request. Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are at least workshop-tested Ihodpfx Aewhzivsf Iet - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can respray the machine in your desired color - On request, you can order additional accessories, such as tools - On request, we can also install additional equipment, such as safety features - We are happy to arrange shipping and/or onsite delivery for you

Sąlyga: naudotas, Surface Grinding Machine BLOHM Type HFS 6 Serial No.: 10493 Year of Manufacture: 1973 Ihsdpod Hbafjfx Af Iot Electro-magnetic chuck 600 x 300 mm Grinding length 600 mm Grinding width 400 mm Table longitudinal travel max. 650 mm Cross travel 350 mm Distance spindle center - table surface max. 600 mm Distance spindle center - magnetic chuck max. 517 mm Table clamping area 1020 x 300 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel bore 76 mm Table longitudinal feed 2–30 m/min, stepless Table cross feed 2–65 mm, stepless, electric Cross rapid traverse 3 m/min Vertical feed 0.001 – 0.020 mm per feed pulse Vertical rapid traverse 0.250 m/min Grinding wheel speed 1400 / 2800 rpm Motor power hydraulic pump 2.2 kW Motor power grinding spindle 5 / 6 kW Electrical connection 380 Volt, 50 Hz Total connected load 11 kW - Automatic depth infeed - Hydraulic table longitudinal movement - Grinding wheel dressing unit on the spindle head - Electromagnetic plate, construction height 83 mm - Side-mounted coolant unit with magnetic filter in the filter housing - Recirculating grinding spindle lubrication - Freestanding electrical cabinet (800 x 500 mm) - Swiveling control panel - Operating manual and spare parts list Space requirements L x W x H: 3000 x 2200 x 2100 mm Weight of surface grinding machine: 3000 kg Weight of control cabinet: 200 kg Good condition

Sąlyga: naujas, Gamybos metai: 2025, Centre height: 250 mm Spindle bore: 103 mm Ihsdpfxjd I A Dho Af Iet Distance between centres: 1000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Spindle speed range: 9 - 1600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2500 x 1100 x 1380 mm

Sąlyga: geras (naudotas), Gamybos metai: 2019, Niles N 40 MC - 6000 tekinimo-frezavimo centras, Pagaminimo metai: 2019, Ihjdjw T Ag Eopfx Af Iot Valdymas Siemens SI 840 D SL, X/Z ašys 850/6820 mm, Y ašis -200 / +400 mm, B ašis 0,001°, B ašies pasukimo diapazonas -105° / +95°, Įrankių keitiklis 192 pozicijos, Pagrindinio veleno C ašis 0,001°, Veleno greitis iki 1750 aps./min., 2 pavarų pakopos, Didžiausias ruošinio svoris tarp tvirtinimo galvutės ir atraminio taško 6.000 kg, Variklio galia 87 kW, Tvirtinimas HSK 100, Luneta 70 - 425 mm, Atraminis taškas,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, X ašies eiga: 400 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 300 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 1 aps./min, plunksnos brūkšnys: 60 mm, bendras aukštis: 2 100 mm, bendras plotis: 2 100 mm, bendras ilgis: 2 300 mm, stalo plotis: 450 mm, stalo ilgis: 750 mm, sukimosi greitis (maks.): 4 500 aps./min, sukimosi greitis (min.): 1 aps./min, bendras svoris: 1 900 kg, ruošinio svoris (maks.): 500 kg, Traverse paths X/Y/Z 400/350/300 mm, speeds 1 - 4500 rpm, motor 4.5 kW, spindle SK 40, Heidenhain TNC 320 control, table size 750x450 mm, hydraulic tool clamping, coolant system, splash guard, tool holders, electronic handwheel, operating manual Ihedpewb Erzofx Af Iet

Sąlyga: paruoštas naudoti (naudotas), Technische Details: Geschwindigkeit - 130 m/min, Baujahr - 2006, Auslauftisch - 6 m, Drahtdurchmesserbereich 4-12 mm. Ihedpfstndgpsx Af Iet

Gamybos metai: 1969, Sąlyga: paruoštas naudoti (naudotas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, complete with documentation; on-site inspection is possible. Ihodeqzkdmspfx Af Iot

Sąlyga: naujas, Bernardo Universal Lathe Master 360 Pro Centre Distance: 1000 mm Centre Height: 180 mm Swing over Bed: 360 mm Swing over Gap*: 502 mm Swing over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1-5 Spindle Speed Range (8): 70 - 2000 rpm Longitudinal Feed Range (32): 0.052 - 1.392 mm/rev Cross Feed Range (32): 0.014 - 0.380 mm/rev Isdpfx Aod I H Izef Ioht Metric Threads (26): 0.4 - 7.0 mm Imperial Threads (34): 4 - 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Stroke: 100 mm Tailstock Taper: MT 3 Rated Motor Power S1 100%: 1.5 kW (400 V) Motor Power Consumption S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1825 x 750 x 1600 mm Weight approx.: 576 kg *Removable Gap Bed Length: 205 mm Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, per DIN 55029 • Fixed steady rest – max. workpiece diameter 70 mm • Travelling steady rest – max. workpiece diameter 60 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 280 mm • Four-way tool post • Safety guard for four-way tool post • Safety slip clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) • Motor with electromagnetic brake (CE compliant) • Base with drawers • Operating tools