Vairavimo/velkamosios ašies tekinimo staklės / Commodor

WEILER Commodor 180 GSD

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, COMPLETELY REFURBISHED, including Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No. 2268-87 >> Center Height: 180 mm >> Center Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose, DIN 55029 Camlock >> Tailstock: MT 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threading: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1,500 kg >> Spindle Brake, selectable >> Motor Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Accessories and Equipment: >> 3-Axis Digital Readout K&C, new, 12 months manufacturer warranty with manual >> NEW 200 mm 3-jaw chuck, 2 sets of jaws >> Multifix tool post, size B with 3 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp Safety features: >> Electronic spindle guard Pgodsymznhopfx Acaop >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers available on request. About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The slideways have been reground or hand-scraped as new. Complete with acceptance according to inspection protocol. Finished in 2K high-gloss white paint. The Multifix tool post and the chuck are new. Safety features include a brake motor, electronic spindle guard, and two emergency stops. This is an absolutely as-new lathe. The Weiler runs very smoothly even at high speeds. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Geometrically Overhauled with Inspection Protocol for Tolerances According to New Machine Standards Technical Data: >> Machine No. 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with Bayonet Lock >> Tailstock Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threading Capabilities: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle Brake Switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zero, direction of count switching >> New collet chuck setup, new collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 steel tool holders >> Bed stop >> Electric chuck guard NEW >> Rear splash guard >> Operating manual >> Coolant system >> Machine mounts About the machine: Offered is a Weiler Condor 81 lead and feed screw lathe in very good geometrically overhauled condition. The guideways have been newly ground and hand-scraped. Inspection carried out according to the test protocol. Accessories such as collets and chucks are new. Pedpfx Aswrm Dtscajgp For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops—an absolutely like-new lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Būklė: naudotas, Gamybos metai: 2006, mašinos/transporto priemonės numeris: 185078, Offer 24435 Technical Specifications: - Table surface: 1700 x 550 mm - Manual travel X / Y: 1300 x 500 mm - Drill press manufacturer: MAXION, Model: BT 15 GL - Drilling capacity up to: 18 mm - Thread cutting capacity up to: M10 - Drill spindle taper: MK 2 - Drill spindle stroke with fine depth adjustment: 90 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - 4 spindle speeds: 320, 560, 1000, 1600 rpm - Motorized stroke of the drilling unit - Table clamping X + Y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Power supply: 400 V - Required space approx.: W 1750 x H 1600 x D 1000 mm - Weight approx.: 1200 kg - Various guide bushings Psdpout Uzajfx Acaogp

Būklė: naudotas, Gamybos metai: 1998, Plokščių šlifavimo staklės Gamintojas: Geibel + Hotz Modelis: FS 40 AC Pagaminimo metai: 1998 Stalo ilgis: 400 mm Stalo plotis: 200 mm Maksimalus apdirbamo gaminio svoris ant stalo: 150 kg Šlifavimo disko skersmuo: 225 mm Šlifavimo disko plotis: 25 mm Podpjwcym Ajfx Acaegp Šlifavimo disko skylės skersmuo: 51 mm Staklių svoris (apytiksliai): 1 050 kg Staklių matmenys (ilgis x plotis x aukštis): 1 800 x 1 200 x 2 250 mm 22726

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2015, mašinos/transporto priemonės numeris: 4293, spaudimo jėga: 40 t, Tryout Press – Manufacturer Hidralmac – 40 t Tryout Press – Table 1,000 × 700 mm For sale is a tryout press from Hidralmac with a pressing force of 40 t. The machine features an extendable and tiltable table (up to 45°), an installation height of 1,200 mm, as well as precisely controllable hydraulics. It is ideal for spotting, adjustment, and tryout work in tool and mold making. ==== Technical Data & Information: Tryout Press Hidralmac – 40 t Tryout Press Pgodpfx Acsdxrqxoaop ==== General Information - Manufacturer: Hidralmac - Model: Tryout Press - Design: Tryout Press / Spotting Press - Press force: 40 t - Machine weight: approx. 8.5 t - Dimensions (L × W × H): 4,300 × 2,700 × 4,500 mm ==== Working Area - Installation height (table – ram): 1,200 mm - Distance between columns: 1,250 × 1,000 mm - Stroke: 1,200 mm - Table height above floor: 700 mm ==== Table System - Table size: 1,000 × 700 mm - Table travel: 1,200 mm - Table tilting: up to 45° - Table travel speed: 25 mm/s - Max. table load: 5 t ==== Tool Clamping - Top tool swing-away: 170° ==== Hydraulics and Drive - Number of cylinders: 1 - Column and cylinder material: SAE 1045 (C45), induction-hardened and chrome-plated ==== Speeds - Forward speed: max. 95 mm/s - Return speed: 80 mm/s - Working speed: 0 – 10 mm/s and 10 – 155 mm/s ==== Control System - Siemens monitor: 9 inch - Linear measurement system for position monitoring - Adjustable: travel, hold positions, switching points - Working speed freely programmable - Control monitors hydraulics, pump, and safety zones - Separate switch cabinet - Operator panel on swivel arm ==== Safety - Light sensors (SICK): 1,200 mm ==== Scope of Delivery - CE Declaration (2006/42/EC) - Manuals and operating instructions ===== Spotting operations, tool adjustment, tool tryout, mold making, toolmaking, tryout operations, tuning processes Spotting press, tool tryout press, tryout press, tool tuning press, tool try-out press, tryout press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machine directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements as they fully comply with the national Brazilian safety guideline NR 12, which builds upon these standards. Our great strength lies in special-purpose machine building and press automation. We offer custom hydraulic presses at surprisingly attractive prices. The hydraulics of our presses mainly use components from leading European manufacturers.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, NENAUDOTAS / naujas / kaip naujas Vibracinis stalas Pgjdpfx Ajvrl Ufecaep Maitinimas: 400 V 2x asinchroniniai trijų fazių ekscentriniai varikliai Su instrukcija / dokumentacija! Įrenginį galima apžiūrėti mano sandėlyje iš anksto susitarus. Siuntimas ir pakrovimas, žinoma, galimi!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, ašies variklio galia: 45 000 W, veleno greitis (maks.): 3 500 aps./min, bendras aukštis: 2 110 mm, bendras svoris: 7 600 kg, valdiklių gamintojas: OKUMA, valdiklio modelis: OSP -P200L, gaminio ilgis (maks.): 5 330 mm, ašių skaičius: 2, Ši "Okuma LB400-M" buvo pagaminta 2007 m. Tvirtas tekinimo frezavimo centras, kurio pasukimo skersmuo virš lovio yra 620 mm, o virš balno - 420 mm. Jo strypų talpa - 80 mm, o griebtuvo dydis - 400 mm. Suklys dirba iki 3 500 aps/min greičiu, jį suka 45 Kw variklis. Į komplektą įeina 12 padėčių motorizuotas bokštelis. Susisiekite su mumis ir gaukite daugiau informacijos apie šią mašiną. Pgjdpoygxccefx Acaop • Ašių skaičius: 2 + C • Svyravimo skersmuo virš lovos: Perkėlimo skersmuo: 620 mm • Pasukimo skersmuo virš balno: 420 mm • Atstumas tarp centrų: Atstumas tarp centrų: 1 270 mm • Griebtuvo dydis: 400 mm • Strypo talpa: 80 mm • Bokštelio tipas: Motorizuotas • Įrankių stotys: 12 pozicijų • X greita eiga: 20 m/min • Z greitoji slinktis: 25 m/min • Galinės staklės suklio kūgis: MT #5

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1980, Darbo stalas 500 mm x 1200 mm Išsikišimo eiga 600 mm Įrankio tvirtinimas MK 4 Pgjdpjx N Ih Ijfx Acaop Gręžimo galia 32 mm pliene Sriegimo įrenginys Aušinimo įrenginys Apsaugos įtaisas ant grąžto Pilnai atnaujintas 2026 m.

Gamybos metai: 1995, būklė: geras (naudotas), DEMAG DKUN 5-500-K-V1F4 Electric Chain Hoist Pgodpfx Asudv Tkecajp Type: Electric Chain Year: 1995 Chain Length: 3 meters Three-phase 380V Capacity: 1,000 kg 2 speeds (12.5 m/min - 6.2 m/min) 1.7 kW

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 235 mm, veleno skylė: 52 mm, tekėjimo skersmuo: 400 mm, centro aukštis: 200 mm, tekėjimo ilgis: 1 000 mm, Lathes Series PREMIUM CU 400 RD-Vario Our universal lathes and stepless speed-controlled lathes from the PREMIUM CU series come equipped with a wide range of features and accessories suitable for customers across various industries. The PREMIUM CU series allows precise adjustment of cutting speed to the material and turning diameter – especially advantageous for non-ferrous metals, plastics, and achieving perfect surfaces on precision components and fits. A particularly interesting feature is the R/L control units mounted on the tool slide, enabling easy selection of clockwise or counterclockwise spindle rotation. These replace the switching shafts commonly found on conventional engine lathes. Efficient handling is ensured by electromechanical spindle brakes for ultra-fast spindle stop. The leadscrews are equipped with overload protection. Performance Data and Capacities: - Distance between centers: 1000 mm - Center height: 200 mm - Swing over bed: 400 mm - Swing over cross slide: 235 mm - Swing without gap/bridge: 550 mm - Bed width: 320 mm - Cross slide travel: 235 mm - Top slide travel: 110 mm - Maximum tool shank: 25x25 mm - Chuck mounting: DIN 55027 No. 6 - Spindle taper: MK 6 - Spindle bore: 52 mm Speed ranges (stepless): - Range 1: 18 – 98 rpm - Range 2: 48 – 265 rpm - Range 3: 144 – 790 / 385 – 2120 rpm Longitudinal feeds (80): 0.015 – 0.6 mm/rev Cross feeds (80): 0.0075 – 0.3 mm/rev Metric threads (40): 0.25 – 7.5 mm Metric module threads (40): 0.0625 – 1.875 mm Imperial threads, TPI (40): 120 – 4 TPI Imperial module threads, TPI (40): 480 – 16 TPI Tailstock taper: MK 4 Quill diameter: 50 mm Quill stroke: 100 mm Motor power: 7500 W Power supply: 400/50 V/Hz Overall length: 2350 mm Overall height: 1330 mm Weight: 1590 kg Standard Equipment: - RÖHM 3-jaw chuck Pgsdpfx Acoy Hlxfeaep - 5-piece quick-change toolholder set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Tool slide with splash guard - Base / chip tray / splash guard - Tool kit / operating manual / CE compliance PREMIUM CU Series Standard Features: - Heavy-duty cast-iron machine bed, excellent vibration damping - Removable gap bridge - Prism guides - Spindle hardened and precision-ground, high concentricity, adjustable precision bearings - Smooth-running spindle and feed gearbox with oil bath - Gears made of hardened and precision-ground chrome-nickel steel - Reverse feed gear - Covered, trapezoidal-thread leadscrew, hardened and precision-ground - Tool slide with split nut - Precision-adjustable slideways - Heavy-duty tailstock with taper turning offset - Lathe accuracy conforming to DIN standards Includes 3-axis digital position display The machine is located in our showroom in 71334 Waiblingen-Beinstein and is available for immediate delivery. For further equipment details, please contact us.