Dviejų sraigtų ekstruderis

Weber DS 120

Būklė: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) Hfjdpfxsg Ezars Ag Eji *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Būklė: naudotas, Gamybos metai: 2006, The Kahl twin-screw extruder is a machine manufactured by Kahl in 2006. It is currently stored in Germany and comes equipped with a fine-grain hopper, fine-grain discharge, fine-grain bag, a belt unit (type: BTK 1510-0), water dosing unit, extruder, supply air blower, and was refurbished in 2016. The system also includes a dedusting unit, vibrating screen, dust extraction, final packaging, belt dryer, product hopper, tubular chain conveyor, cyclone, rotary valve, distributor, dust bag, exhaust blower, airstream rotary dryer, feed table, mixer, and an additional supply air blower and belt dryer. Delivery terms are FCA. Equipment: 1 x feed table, 1 x tubular chain conveyor, 1 x mixer 1 x water dosing unit, 1 x extruder, 1 x supply air blower 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tubular chain conveyor, 1 x fine-grain hopper, 1 x fine-grain discharge, 1 x fine-grain bag, 1 x supply air blower, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust blower, 1 x airstream rotary dryer, Hsdovfxqyepfx Ag Eofi 1 x dedusting unit, 1 x vibrating screen, 1 x dedusting unit, 1 x final packaging 1 x belt unit, type: BTK 1510-0 completely overhauled in 2016

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Wide-slot die Serial No.: L 1081-041391 // Calendering unit Serial No.: F 1201-041392 Take-off unit Serial No.: F 1201-041392-T Max. winder speed: 50 m/min. Type: Film extrusion line, 1080 mm usable width Equipment / Additional information: Max. gross PP output up to 1,000 kg/h with film width up to 1,200 mm Special feature: the winding unit allows for slitting narrow films (150 mm - 100 mm) or, for example, 8 x 175 mm or 2 x 700 mm A die lip with a max. film thickness of up to 2 mm at up to 1,000 kg/h. Total power consumption: 211 kW/h Main drive power: 250 kW Min. film thickness: 0.68 mm in PS / min. 0.75 mm in PP Max. calendering speed: mechanically up to 50 m/min possible Includes: - Maguire dosing system, 5-chamber - Extruder (screw 160 mm) Amut EA 160 // Year: 2003 - Screen changer (for cleaning in food-grade production) - Melt pump - Wide-slot die (1 unit) 120 cm - Die lip for max. film thickness up to 2 mm, up to 1,000 kg/h - Calender 140 cm - Thickness measurement device SBI TMD-EC/140.20.200.R - Post-cooling rollers (4 pcs.) Hfjdpfx Asw Tbr Hsg Eoi - Winder (film accumulation during roll accumulation) - Slitting machine & film take-off - Film winders (3 pcs.) - Mill MAZZA CBS 25 40 2T18 // Year: 2003 Complete existing infrastructure: switch cabinets, pumps etc.

Gamybos metai: 2002, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Dvigubų sraigtų ekstruderis Ref. Nr.: DE27695 Gamintojas: Leistritz Tipas: ZSE 40 HP Metai: 2002 Sraigto skersmuo: 2 x Ø 40,0 mm L/D: 40D Variklis: 70 kW Išsamiau: vienkryptis, segmentuoti sraigtai ir cilindras, 1 x segmentas šoniniam padavimui Hodpfjx Dip Tex Ag Eofi Parinktys: granuliavimas, dozavimas, šoninis tiektuvas Pasiūlymas neatitinka jūsų lūkesčių? Apsilankykite mūsų tinklalapyje Plama Engineering arba atsiųskite mums išsamų užklausą – turime tinkamų sprendimų beveik kiekvienam biudžetui.

Gamybos metai: 2021, būklė: naujas, Overband Plate Magnet from surplus stock / overproduction Manufactured in VA 1.4301, tightly sealed For sale is a plate magnet with threaded holes on the rear side. The magnet can be installed either as a "police magnet" or for extracting metal contaminants above a conveyor belt. Lifting eyes for suspension are included. Dimensions of the magnet block: 620 x 420 x 250 mm Hfjdpfx Agsfktk Ho Esi Only 1 unit available for immediate delivery. Many other dimensions available from stock.

Būklė: labai geros būklės (naudotas), bendras ilgis: 3 000 mm, bendras plotis: 1 500 mm, Skydinių plokščių presas labai geros darbinės būklės + Grecon finger jointing Hfjdpfx Ajt Uduxog Eoi

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 28 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 300 kN, For sale is a KraussMaffei hybrid injection moulding machine, 2-component model, type KM 130-750 CX. The machine is in very good condition, immediately operational, and has low operating hours. It features electronic injection and dosing units, as well as a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2x 50 mm additionally included) Core pull: 1x hydraulic Needle shut-off: pneumatic Tie-bar extension: 160 mm Hfedpfx Asu Hxm Ueg Eoi Cavity pressure transducer Selector valve Transport and loading can be organised across Europe for an additional charge upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, visit our website.

Gamybos metai: 1998, būklė: naudotas, Technical details: Hodpfxou Ibuws Ag Eefi Profile width: 50 mm Working height: 950 mm Interface: RS 232 pinout Window profile processing machine for materials such as PVC, aluminium, and timber windows in a continuous through-feed process. Materials are conveyed via a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, an operator control panel, and transport units. Also included are a station with transport system vibrator, chip conveyor unit, and a stand with confirmation printer. Our photos first show the machine at its location, followed by images depicting the system prepared for transport and sale. Workstation No. 1 (Machine 1): - Sawing station with saw blade Ø 400 x 4.5 mm - Drilling unit with collet chuck (vertical upward) - Drilling unit with collet chuck (horizontal) - Drilling unit with collet chuck (vertical downward) - Twin drilling unit with collet chuck (vertical downward) - 45° drilling unit with collet chuck (upward) Workstation No. 2 (Machine 2): - Drilling unit with collet chuck for screw connections (vibratory bowl) (vertical upward) - Milling spindle, horizontal, with 11 slotting saws - Triple drilling unit with collet chuck (vertical downward) - Triple drilling unit with collet chuck (vertical upward) - Triple drilling unit with collet chuck (horizontal) 2 motor-driven transport units: - LxWxH: 5,650 x 2,400 x 1,000 mm - Track width: 1,980 mm 2 motor-driven transport units: - LxWxH: 2,150 x 2,750 x 1,050 mm - Track width: 2,300 mm

Būklė: naujas, Gamybos metai: 2026, Preciziška vedimo ir traukos veleno tekinimo staklės Gamintojas: OPTIMUM Modelis: OPTiturn TZ 4 Art. Nr.: 3432240 Būklė: Nauja staklė Atstumas nuo centro iki pagrindo: 200 mm Atstumas tarp centrų: 800 mm Sukimosi greitis: 45 - 1 800 aps./min (16 pakopų) Standartinė komplektacija: Hedpfegqw U Rox Ag Ejfi - 3 ašių skaitmeninis indikatorius DPA 32 - Fiksuotas centras MK 3 - Greitakeičiamas pjovimo laikiklis B dydžio - Tekinimo laikiklis BD - Redukcinė įvorė MK 6 / MK 3 - Stacionari atrama ø 10 - 130 mm - Judačioji atrama ø 10 - 100 mm - Aušinimo skysčio įranga - Ištraukiama drožlių dėžė - LED mašinos lempa - Eksploataciniai įrankiai

Būklė: labai geros būklės (naudotas), Parduodamas OMIS 5 tonų tiltinio krano komplektas, idealiai tinkantis pramoniniam naudojimui cechuose. 🔧 Pagrindinės charakteristikos: Keliamoji galia: 5 t (5000 kg) Tipas: dvitėjis tiltinė kranė Gamintojas: OMIS (Italija) Bėgių tarpas: 20 000 mm (20 m) Kablio eiga: 6,6 m Tvirta dėžinė konstrukcija ⚙️ Darbinės savybės: Kėlimo greitis: 4 m/min Tilto eiga: 30 m/min (greitas režimas) – 7,5 m/min (lėtas režimas) Vežimėlio judėjimo greitis: 16 m/min Maitinimas: 380V trifazė – 50 Hz Valdymas: pakabinama pultelio valdymo sistema 🏭 Naudojimas: Visada naudotas uždaroje pramoninėje patalpoje Hedpfx Agoy Aymie Eofi Puikiai tinka dirbtuvėms, metalo konstrukcijų gamybai ir sunkių krovinių perkėlimui.