Pilnas dažymo cechas

walther 4046122

Būklė: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 5 980 mm, bendras plotis: 3 380 mm, bendras ilgis: 3 074 mm, keliamoji galia vienai sandėliavimo sekcijai: 460 kg, įėjimo įtampa: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 07006421/001 Year of manufacture: 2007 Total Load Capacity: 2x33,500 kg Load per Tray: 460 kg (evenly distributed) Tray Dimensions: 3050 x 864 mm Number of Trays: 32 units (more upon request) Shuttle Dimensions W x D x H: 3380 x 3074 x 5980 mm (height of Kardex is adjustable to available clearance) Shuttle Depth with Full Tray Extraction Table: 4198 mm Power Supply: 3/N/PE400 V, 17 A, 50/60 Hz, 8.6 kVA This offer is valid while the system remains unsold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays, Medium X Type 2, 460 kg each, evenly distributed; additional trays available on request. - Tray size: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 (4198) x 5980 mm - System footprint approximately: 14.19 m² - Capacity with 32 trays: approx. 84 m²; each tray is approx. 2.64 m² - Electronic volume measurement system, 25 mm display (grid) - Access opening with sliding doors for personnel and goods protection - C2000 control with graphical OP-C2000 B/W display Ksdpfx Aswnankeauedk - LED anti-glare lighting above access point - Toothed-belt drive for minimal noise operation - Toothed-belt drive for high-speed order picking - Tray heights adjustable in 25 mm increments via support profile configuration; essential for high-density storage - Automatic full tray extraction table Price: On request by e-mail only Price: excl. VAT, including transport and installation Lead time: immediately from stock Machinehandel De Leeuw BV specializes in used machines and accessories for the machining industry, as well as pre-owned paternoster systems from manufacturers such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems like Kardex Shuttle XP and XPlus. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Būklė: labai geros būklės (naudotas), Four-jaw chuck, Röhm brand Diameter: 315 mm Individually adjustable jaws Kjdpfopk A A Hjx Aauodk Bolt circle: 120 mm

Būklė: naudotas, Gamybos metai: 1983, 4 x complete spray booths with drying ovens for buses. Fully operational, including all walls/constructions and motors/burners. Ksdpfxewrpwvo Aauedk

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, veikimo valandos: 925 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 500 mm, sukimosi skersmuo virš skersinio stumduko: 290 mm, tekėjimo skersmuo: 500 mm, veleno greitis (maks.): 5 500 aps./min, veleno skylė: 73 mm, X ašies eiga: 210 mm, Y ašies eiga: 80 mm, Z ašies eigos atstumas: 525 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 22 m/min, greitasis eiga Z ašyje: 30 m/min, bendras aukštis: 1 808 mm, bendras ilgis: 4 447 mm, įvorės išorinis skersmuo: 210 mm, bendras plotis: 2 378 mm, sūpynės skersmuo virš skersinio vežimo: 290 mm, veleno nosis: FL 140h5, bendras svoris: 4 300 kg, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, 925 veleno valandų, kitaip tariant – praktiškai kaip nauja; būtent tokios būklės yra ši DMG MORI CTX ALPHA 500 V4! Įrenginys atkeliavo iš prototipų skyriaus, kuriame daugiausia buvo apdirbama plastikas. Papildomos galimybės ir priedai: - SMW Autoblok 210 BB Ø210mm (įskaitant žandų komplektą) - DMG CELOS programinė įranga - Drožlių transporteris - Aukšto slėgio aušinimas - Pedalas griebtuvui suveržti/atleisti Ksdpfoy Duinjx Aauedk - Įvairūs įrankių laikikliai (varomi ir statiški) - Originali DMG dokumentacija Svoris ir matmenys: 4.300 kg 4447 x 2378 (įskaitant PLC) x 1808 mm

Būklė: naujas, Gamybos metai: 2025, bendras aukštis: 4 000 mm, bendras ilgis: 7 000 mm, bendras plotis: 3 000 mm, garantijos trukmė: 24 mėnesiai, temperatūra: 80 °C, oro poreikis: 36 000 m³/val, įėjimo įtampa: 380 V, šildymo galia: 345 kW (469,07 AG), galia: 40 kW (54,38 AG), kuras: suskystintos naftos dujos (LPG), energijos suvartojimas: 40 kWh, izoliacinė medžiaga: Mineralwolle, izoliacijos storis: 50 mm, nominali galia: 345 kW (469,07 AG), Įranga: apšvietimas, MAIN STANDARD Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. The processes in the booth are managed via a PLC system, ensuring that the desired parameters are consistently maintained. FUNCTIONAL PRINCIPLES OF THE BOOTH The processes within the booth are operated using a control panel that manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at external temperature. The air is then expelled through the extraction unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before release. FLASH-OFF PROCESS After painting, the booth continues operation for approximately 15 minutes to remove residual solvents and thinners. During this process, fresh outside air continues to circulate in the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and introduced to the booth via a distributor. As 20% of solvent is released during drying, it is expelled together with this exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted via the control panel as required. COOLING PROCESS After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates within the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of the machinery and devices installed in the booth. The panel is constructed from durable galvanized sheet and steel profiles, and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel includes essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the panel and motors or other electrical devices. Kodpfxjwzmcbe Aausdk • Electrical wiring is designed to allow for booth relocation if necessary. • Operating equipment runs on 380 V 50 Hz, while control units use 220 V. • Booth operating time can be monitored on the electronic control panel for easy maintenance tracking. • Temperature and time settings for paint flashing, intermediate drying, and final drying can be easily adjusted via the digital display on the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, galia: 7 kW (9,52 AG), kuro tipas: dyzelinas, bendras svoris: 2 400 kg, Gamybos metai: 2023, RS1500, REMAV markė. Kdsdjuccyzepfx Aauek Nauja įranga, su TÜV sertifikatu.

Būklė: reikia remonto (naudotas), Gamybos metai: 2004, Schneider compressed air screw compressor defective Unit requires repair. Kdedpfxjvmivcj Aauek Machine is being sold at a low price due to the necessary repair. Motor power: 11 kW Flow rate: 1,500 liters/min Compressor pressure: 10 bar Location: ex stock 54634 Bitburg Machine is sold as defective No warranty – no guarantee –

Būklė: geras (naudotas), Gamybos metai: 2023, Ši dažymo kamera parduodama kliento užsakymu ir gali būti apžiūrėta įjungta. Kdsdpfx Aoylm U Roauok

Būklė: naujas, Gamybos metai: 2026, Rehnen Spray Table Lacky Advantages: Thanks to its 360° rotatable arms, it always provides optimal support and a stable surface for all workpieces. Easily adjustable in height and 360° rotatable for fast, efficient working. Due to its protective covers, the arms remain movable even after intensive use. Kedpelrrrmjfx Aauedk Height (mm): 950–1250 Width (mm): 600–1120 Length (mm): 700–1260 Diagonal (mm): 900–1680 Load capacity (kg): 100 Location: available immediately from stock.

Būklė: naudotas, Gamybos metai: 2005, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm ± 20 mm - Operation side: right - Price for overhauled machine - Duo-version spray gun drive - Height-adjustable spray units - Dry extraction system - Extraction port diameter: 490 x 350 mm - Exhaust air capacity: approx. 6,500 m³/h - Paper belt conveyor system - Feed speed steplessly adjustable: 1.5 – 7 m/min - PLC control with touch screen Ksdpoxnbhvsfx Aaujdk - Number of installed spray units: 0 pcs. - Number of paint pumps: 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length: 4,300 mm - Width: 3,360 mm + 1,850 mm - Height: 2,700 mm - Total connected load: approx. 7.1 kW / 28.6 A - Voltage, frequency: 400 V / 50 Hz - Location: in stock - Voltage fluctuations max. ± 5 % _____ Optionally, we can also provide you with an offer for assembly and commissioning of the system, as well as staff training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please contact us!