Centrifuginė įranga

Walther Trowal TT 90-A/2C-V9

Būklė: geras (naudotas), System: REWA chamber filter press, used Type: 470-15-25K-HP Design: side bar guided Lrjdpfx Acjqakbropjk Filter plate size: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available to suit the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (product-contacting parts): flange, tie rods stainless steel, PP or rubber-coated Material (non-product-contacting parts): stainless steel Purchase or rental: Plant inspections by appointment at our facility. Other: We supply the system used, functional or refurbished, adapted to your requirements. Would you like to rent or buy this system? Please contact us, we are happy to assist you.

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas), A fully automatic band saw system from Kasto is available. Cutting range at 90°: round material: 530 mm, square material: 530 mm x 530 mm, flat material: 530 mm x 640 mm. Saw blade length: 7,675 mm, blade width: 54 mm, blade thickness: 1.6 mm, cutting speed: 120 m/min. Overall system dimensions (X/Y): approx. 18,000 mm / 4,000 mm, weight: approx. 6,000 kg. Inclusive of roller conveyors. Documentation available. On-site inspection possible. Ljdpfx Acsv S E Edjperk

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. Lrodpfx Aspugwiecpek The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Būklė: naujas, Gamybos metai: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Lrjdei Ar Ruopfx Acpek Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Max. table load: 1500 kg

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), Description to follow! Lrsdpsx A H Rxofx Acpjk

Būklė: naudotas, LOSER MODEL AA220 DOWEL TRIMMER / TENON CUTTER - USED - Capacity: 7500/1500 dowels per hour Lodpfoqpdkcsx Acpork - Dowel diameter capacity: 6-18 mm

Būklė: naudotas, Gamybos metai: 2014, maks. tekinimo skersmuo 160 mm maks. tekinimo aukštis 150 mm maks. ruošinio skersmuo 100 mm maks. ruošinio aukštis 150 mm maks. sukimų dažnis 6.000 aps./min X ašies eiga 700 mm Lsdpfx Acoqvd Iuspork Z ašies eiga 375 mm C ašis 360° Valdymas: FANUC Vertikali tekinimo staklė | EMAG – VL2 Įrengta ruošinių pervežimo konvejeriu. Staklės yra itin geros būklės. Atkreipkite dėmesį, kad techniniai duomenys pateikti pagal panašias stakles.

Būklė: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives Lodpfx Aormkfnecpsrk X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Gamybos metai: 1988, būklė: geras (naudotas), mašinos/transporto priemonės numeris: D 05103, Ref. No. 13439 Technical Data: - Polishing/Grinding Wheel Dimensions approx. 300 x 40 x 76 mm Ledpjk D Ewgofx Acpjrk - Abrasive Belt Dimensions approx. 3500 x 50 mm - Contact Wheel Dimensions approx. 400 x 50 mm - Drive Speed: 1450 rpm - Drive: 400 V / 1.8 kW - Space Requirement approx. W 1100 x H 2450 x D 800 mm - Weight approx. 300 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Cell with KUKA KR 180 grinding robot Grinding cell Berger 2012 (External Grinding A1) - Total weight approx. 6,300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot KUKA KR 180 R2500 Extra - Year of manufacture: 2011 - Control system: KRC 4 - Additional axis (7th axis) Belt grinding station BSS10 Lrjdsg Saqvjpfx Acpsk - Max. belt dimensions: 3500 x 30 mm - Max. contact wheel diameter: 200 mm - Motor power: 4 kW 2 x polishing stations, - Polishing wheel diameter: 350 - 600 mm - Power: 5.5 kW Gripper change cabinet Interoll Automation GmbH belt conveyor - Total length: approx. 2,000 mm - Belt width: approx. 440 mm The price includes a complete concept as shown in the video. We have 4 such cells available. It is possible to manufacture any detail as seen in the video.