Įrankių presetteris

WALTER Heli Toolcheck

Būklė: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Rjdpfx Aeh Rdwxef Aot Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, veikimo valandos: 41 000 h, Funkcionalumas: visiškai funkcionalus, FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With automatic feeder BBV 190 500 kN | 100–1120 strokes/min | Fully automatic | Swiss top quality Technical Highlights: Rated force: 500 kN Stroke rate: 100–1120 strokes per minute Operating hours: 41,000 h Rjdpewpg Rbefx Af Aot Main drive: 22 kW Control voltage: 24V DC Power supply: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment: 64 mm Working Areas: Max. tool installation width: 1100 mm Strip feed width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Adjustable strip entry height: 60–140 mm Max. strip width: 120 mm Max. feed length: 85 mm Max. material thickness: 4 mm Feed angle: 180° Machine Dimensions (incl. BBV 190): Setup dimensions (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Features: Feeding system BBV 190 – fully synchronized mechanical strip feeder Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and ram height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration into peripheral systems Condition & Delivery: Machine in excellent technical and visual condition Fully serviced and tested Immediately available ex Europe Worldwide shipping and installation support available Contact us today for pricing and further technical details. We are happy to help you modernize your production line with Swiss precision.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Completely overhauled BRUDERER stamping press BSTA300 including new press control system Technical Specifications: ----- Tonnage: 300 kN Die installation opening: 750 mm Stroke rate: 80–1400 (depending on selected stroke) Adjustable stroke: 13, 16, 19, 25, 32, 38, 44, 47 mm Ram adjustment range: 51 mm Die installation height: 171–239 mm (depending on selected stroke) Bolster plate: 740 x 480 mm Ram area: 630 x 360 mm Strip passage width: 206 mm Base plate opening: 710 x 160 mm Strip feed height: 50–120 mm Strip travel direction: left to right Feed type: Servo feed Rodpfx Afjtvnlbo Aet Machine weight: approx. 5,150 kg Machine color: RAL 1013 pearl white Add-on component color: RAL 7016 anthracite Control cabinet color: RAL 7035 light grey

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of Manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by appointment. Redpfxow Hg Nle Af Ast Condition: Very good (high precision), immediately available for operation. Spindle hours (as of August 1, 2025): 9,580 h The core of the machine is the integrated travelling column with turning-milling spindle and interpolating B axis. Machine base data: * Partial hollow chucking device (hydraulic) * C axis * Upper cross-slide with turning/milling spindle as motor spindle, with hydraulic clamping for turning operations, spindle interface: Capto C6 * Y axis: +/- 200 mm * B axis: +/- 120° * Tool disc magazine * Absolute, direct linear measurement systems in X, Y, Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1,510 mm * Maximum bar diameter: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C axis speed: up to 5,000 rpm Turning-milling spindle: * Tool holder: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (approx. W/D/H): 6,860 x 4,220 x 2,530 mm * Total weight of the machine (approx.): 18.5 t EQUIPMENT: Good equipment ... * No steady rest * Complete documentation available No guarantee for completeness or accuracy of technical information and equipment details. Detailed technical data sheet and further equipment information available on request.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1975, -KOM 1002- Offered here is a press from HYDRAP, model HKPS8000. Technical Data: Model: HKPS8000 Year of manufacture: 1975 Effective stroke: 200 mm Throat depth: 250 mm (centered) Table size: 320 x 320 mm Installation height: approx. 345 mm Voltage: 380 V Permissible load: 80,000 N Drive type: hydraulic Drive power: 1.5 kW Oil capacity: 60 l Oil viscosity: 3°E With your purchase, you will receive a proper invoice with VAT shown separately. We have many more interesting items for sale. Feel free to browse all our listings. If you are interested or have any questions, please contact us via the message function! Rodpsg Ufvbefx Af Aet

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, vėsinimo galia: 56 kW (76,14 AG), aušinimo tipas: vanduo, įėjimo dažnis: 50 Hz, šildymo galia: 67 kW (91,09 AG), kuro tipas: dujos, "SANYO" PANASONIC ECO G gas heat pump air conditioning unit Model: SGP-E190J2GU2W Nissan FY5 engine Power supply: 230 V AC, 1 phase, 50 Hz Redpfed Tiu Esx Af Aot Maximum electrical power: 1.16 kW, 5.4 A (continuous operation) Device protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS) (cooling): 43.5 kW Heat input (HS) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure, high-pressure side: 30 bar Design pressure, low-pressure side: 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 8 100 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2066-5172, Įranga: dokumentacija / vadovas, CNC Tool Grinder WALTER HELITRONIC ESSENTIAL – Year of Manufacture 2016 For sale: a 5-axis CNC tool grinder from the renowned manufacturer Walter Maschinenbau GmbH. The machine is designed for precision machining of cutting tools such as milling cutters, drills, as well as special and multi-edge tools. The device is fully operational, regularly serviced, and has been maintained in excellent technical condition. Rodpfx Afoyz Dwco Ast BASIC DATA Model: WALTER HELITRONIC ESSENTIAL Year of manufacture: 2016 Control: FANUC Number of axes: 5 Operating hours: 8,100 h Power supply: 3 x 400 V AC, 50/60 Hz Connected load: 25 kVA TECHNICAL SPECIFICATIONS Working travels: X = 330 mm Y = 213 mm Z = 475 mm Feed rates for X, Y, Z axes: 15 m/min A-axis: 360° C-axis: ±200° Spindle speed: 10,500 rpm Spindle motor power: 9 kW Spindle diameter: 70 mm Max. grinding wheel diameter: 150 mm Max. workpiece length (cylindrical grinding): 255 mm Max. workpiece length (face grinding): 185 mm Max. grinding diameter (complete machining): 100 mm Minimum operating pressure: 6 bar Air consumption: 8,000 l/h Coolant pump capacity: 80 l/min at 7 bar Coolant tank capacity: 350 l Machine weight: 3,300 kg Software: Tool Studio version 2.1 EQUIPMENT AND FEATURES Automatic loading arm The machine is equipped with an automatic tool loading system. The loading arm picks tools from the input tray, positions them for processing, and then places the finished tools onto the output tray. This enables fully automated, uninterrupted production without constant operator supervision. Possibility to mount two grinding wheels Simultaneous mounting of two grinding wheels increases working flexibility, reduces setup times, and enables more complex operations without frequent tool changes. Electric cabinet cooling HAOSCH cooling unit included. Additional equipment Professional measuring device for cutters and drills, ensuring fast, precise, and repeatable measurements and facilitating tool setup prior to machining. TECHNICAL CONDITION The machine is in very good technical condition Operated in clean production conditions Fully enclosed work area for safety and noise reduction Regularly serviced.

Būklė: labai geros būklės (naudotas), HSS saw grinding machine VOLLMER model CMS 10M Rsdpsi Hchdsfx Af Aot

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. Rodpefz U S Eofx Af Ast By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: beveik kaip naujas (naudotas), Profile grinding machine Utma model P20 Rjdoff H E Rspfx Af Ajt