Dvigubo korpuso obliavimo staklės

Waldrich Coburg 7 DS 4039

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Grinding length: 973 mm Centre height: 250 mm Maximum swiveling of workpiece table: +6° / -9° Centre taper: MT5 Maximum travel of grinding spindle headstock: 100 mm Nwjdpfxowhp Dne Abbof Maximum swiveling of grinding spindle headstock: +45° / -30° Maximum grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Maximum workpiece weight between centres: 400 kg Internal grinding device, maximum grindable bore: 160 mm Machine weight: approx. 5,000 kg

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Nsdpfx Abouxft Ejbjwf Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, 1 PORTALINIS FREZAVIMO STAKLĖS JOBS LINX DESIGN, 2007 m. CNC FIDIA C20 – Siemens linijiniai varikliai – pastūma 50 m/min X 7200 Y 3200 Z 2000 STALAS 6000 X 2500 AUTOMATINĖ GALVA AŠIS A-C A 200° (+-100°) B 400° (+-200°) VELENO GREITIS 24 000 APS/MIN HSK 63 – 27KW – aušinimas ATC 20 įrankių SVORIS 52T Nwedpfx Aboxtp Hwebof

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Nwjdpjuxfupjfx Abbsf Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, X-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D Njdpfxovwgmme Abbjwf w-axis 1500 mm Column clearance 2500 mm Clamping area 3000 x 2000 mm Workpiece weight 10,000 kg Spindle speeds 5–6000 rpm Gear stages 2 Drive power – milling spindle 45 kW Distance milling spindle – clamping spindle 3500 mm Spindle torque 1250 Nm Tool changer 200 positions Tool diameter 135 / 250 mm Maximum tool weight 50 kg Maximum tool length 400 mm Tool holder ISO SK-50 The portal milling machine is in very good condition. ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angular milling head yes Automatic tool clamping yes Ball screw spindles yes Guideway covers yes Coolant system yes High-pressure cooling system (internal cooling) yes Fully enclosed work area yes Portal machining center with tool changer system and second table plate.

Būklė: naujas, Load capacity: 40,000 kg Length: 8,000 mm Width: 3,000 mm Nedpfxjfrzwfj Abbjwf Height: 900 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 540 / 300 dual mm Dimensions (L x W x H): 9.9 x 3.0 x 0.9 m Heavy-duty trailer with: - Double steering - Small turning radius - Anti-tipping due to steering angle limitation - Very robust, resulting in low maintenance - Swappable drawbar - Impregnated wooden platform - Standard paintwork changes; available in your desired RAL colour on request Images show a 30-ton model. Other load capacities and dimensions available on request – please contact us.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Naudotas, kapitaliai ATNAUJINTAS savarankiško mokymosi CNC tekinimo staklės GEMINIS GHT4 720X3000 – tai tvirtos vidutinio-didelio dydžio, lygiagrindės CNC staklės su FAGOR 8055 valdymu, centru aukštis 360 mm, atstumas tarp centrų 3000 mm, strypo praleidimas 106 mm. Nwsdpfoxdvbcjx Abbsf Staklės pilnai KAPITALIAI ATNAUJINTOS, įskaitant lovio šlifavimą, karučio šlifavimą, turcite dangą, veleno guolius, ašių guolius, ašių varžtus, elektros įrangą, variklių peržiūrą, naujus pavarų įrenginius, naują FAGOR klaviatūrą ir t.t. Įranga apima paruošimą automatinei revolverinei galvai, rankinį griebtuvą ir 2 lunetes.

Būklė: naudotas, Gamybos metai: 1988, Sūkių skersmuo virš staklių lovos 2000 mm Sūkių skersmuo virš atramos / mm Sukimosi ilgis / mm - Tipas 1 K 671 320 F3 - Pagaminimo metai 1988 (pirmasis paleidimas 1998) - Sukimosi ilgis 10.000 mm - Sūkių skersmuo virš lovos 2.000 mm (modifikuota) - Veido plokštės skersmuo 1.950 mm - Veido plokštės spaudimo diapazonas 400 - 1.350 mm - Sukimosi greičiai 1,00 - 140 aps./min. - Sukimo momentas 125.000 Nm - Didžiausia pagrindinė pjovimo jėga 130 kN - Automatinis gręžtuvo įjungimas - Didžiausias ruošinio svoris 70 t - Didžiausias ruošinio svoris su suportu 100 t - Pagrindinio variklio galia 100 kW - Lovoje bėgių skaičius 4 Nodpfxoxn Tz Io Abbowf - Matmenys 22.000 x 6.200 x 2.900 mm - CNC valdymas SIEMENS 840D (2010 už 220.000,00 €) - Atramos pastūma X-Z 0,3 - 4.000 mm/min. - Atramos greita pastūma X-Z 4.000 mm/min. - Vidinės kūgio matmenys 140 x 1:7 - Staklės atitinka CE direktyvas - Įskaitant 2 lunetes, 1 ritininį stovą, 4 žnyples, išteisinimo įrenginį - Būklė: labai gera būklė

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9101, Y ašies eiga: 4 600 mm, Z ašies eigos atstumas: 1 600 mm, sukimosi greitis (maks.): 6 000 aps./min, Įranga: sūkių greitis be galo kintamas, Mašinos konfigūracija: • PowerPortal4000 • Įstrižinis frezos galvutė 45° (C 0,01°/ A 0,01°) • Kamerų sistema SHW įstrižinėje frezos galvutėje • Frezos galvutės jungtis 4 taškų Hirth • Heidenhain TNC 7 • Rankinis valdymo ratukas HR 550 FS • Heidenhain 5 ašių apdirbimo optimizavimas • X = laisvai pasirenkamas, Y = 4.600 mm, Z = 1.600 mm • ToolCenter su 90 įrankių • Aušinimo skysčio sistema 2.500 l • Aušinimo siurblys 70 bar / 30 l/min • Aušinimo vandens-oras perjungimas • Plovimo pistoletas darbo zonoje • Pagrindinis pavara 75 kW iki 6.000 1/min • Įrankių tvirtinimas SK 50 BIG-PLUS • Apkalimas ir groteliniai padėklai • Dvigubas drožlių transporteriai • SHW-UniScan • Sandarinimo oras • Darbo režimas 3 • Belaidis matavimo zondas Hexagon • LED darbo zonos apšvietimas • Antra kamera darbo zonoje Nwodpfx Ajygtnajbbof

Būklė: naudotas, Gamybos metai: 1983, Grinding length: 8,400 mm Grinding width: 1,450 mm Workpiece height: 1,250 mm Clamping surface: 8,000 x 1,250 mm Table height above floor: 920 mm Distance between columns: 1,470 mm Max. workpiece weight: 59,700 kg Machine weight approx.: 59.7 t Space requirement approx.: 22 x 5 x 5 m Adjustment ranges: - Crossbeam, vertical: 1,250 mm - Grinding support, horizontal: 3,100 mm Adjustment speeds: Njdpfovr Hgvjx Abbowf - Machine table (X-axis) Infinitely variable: 1–45 m/min Table creep feed speed: 5 m/min - Grinding support, horizontal (Y-axis) Rapid traverse: 3,000 mm/min Feed, stepwise: 0.001–0.099 mm Feed, continuous: 100–3,000 mm/min Creep feed: 18 + 1 mm/min Tip infeed: 0.001–0.019 mm - Crossbeam (W-axis) Rapid traverse: 410 mm/min Table drive: - Oil gearbox, type Iv4 - Cylinder Ø: 185 mm - Piston rod Ø: 130 mm - Drive motor: 22 kW