Spyruoklių vyniojimo mašina

WAFIOS FUL8

Sąlyga: naudotas, Technical Details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Nedpjvc Aklsfx Aghswp Machine weight approx.: 5.0 t Dimensions lubricating unit (LxWxH): 830 x 650 x 1000 mm Dimensions machine approx. (LxWxH): 3.3 x 1.5 x 1.45 m Dimensions control cabinet (LxWxH): 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically and hydraulically controlled universal spring coiling machine for the production of right- and left-handed tension and compression springs as well as torsion springs. Springs can be produced with any desired pitch and coil body shape. Output max. 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length unlimited, feed speed = 27 - 80 m/min. Coiling unit: Two-finger system, wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire intake 3 mm, two-finger Spring length measuring device LION PRECISION-PANTHER Wire reel holder POST, motor-driven, mandrel Ø 1,400 mm Lubricating unit Control cabinet cooler RITA Hydraulic power unit A wide range of accessories and/or spare parts available on request! i.D.

Sąlyga: paruoštas naudoti (naudotas), Wheel diameter – max. 150 mm Wheel width 1 – 200 mm Module – max. 4 Module – min. 1 Control Siemens Sinumerik 840 D Table diameter 140 mm Axial adjustment – max. 200 mm Cutter mount ISO 40 Max. cutter diameter 130 mm Max. cutter length 220 mm Infinitely variable cutter speeds 300 – 1200 rpm Max. cutter traverse 170 mm Swiveling cutter head + / – 45° Feed rate 1 – 1500 mm/min Rapid traverse speed 3000 m/min Max. workpiece diameter in magazine: 150 mm Total connected load 50 kW Machine weight approx. 8.5 t Nedpfjvzhg Nox Aghjwp Space requirement approx. 4.7 x 3.6 x 2.6 m Used CNC gear hobbing machine make: Pfauter, year of manufacture 1992, completely overhauled in 2013 by SerWeMa, equipped with Siemens Sinumerik 840 D control and workpiece magazine. This is a pre-owned machine, therefore we sell under exclusion of any warranty.

Sąlyga: geras (naudotas), Gamybos metai: 2004, TBT ML 200-2-800 Deep Hole Drilling Machine TECHNICAL DATA Type: ML 200-2-800 Year of manufacture: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drill slide stroke: 800 mm Njdpfx Agsvcbg Sohowp Drilling range: 1 – 10 mm Drilling method: Single-lip drill Drilling depth: Quill spindle: 110 mm Seal housing: 430 mm Seal housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 kW Voltage: 240 / 350 / 350 V Frequency: 100 – 800 Hz Weight: Approx. 2.6 t We do not guarantee the correctness, completeness or up-to-dateness of the information provided.

Sąlyga: naujas, Gamybos metai: 2025, -TFON – Sistema de Precisión para Redondeo y Acabado de Bordes -Diseñado para ofrecer acabados superficiales superiores y redondeo de bordes precisos en una amplia gama de materiales e industrias, el sistema TFON combina automatización avanzada con configuraciones versátiles para adaptarse exactamente a sus necesidades de producción. Compatibilidad de materiales: Njdpohq A Txofx Aghswp Adecuado para aplicaciones en aluminio, acero inoxidable y acero al carbono. Amplio rango de espesores: Procesa materiales de manera eficiente desde 0 hasta 120 mm de espesor. Excelencia en acabado: Especialmente diseñado para proporcionar acabados superficiales de alta calidad que mejoran la estética y la funcionalidad del producto. Versatilidad industrial: Ideal para los sectores de dispositivos médicos, equipamiento para cocinas industriales, piezas automotrices y accesorios metálicos. Precisión en redondeo de bordes: Proporciona un redondeo de bordes preciso con radio 2, mejorando la seguridad y la presentación del producto final. Automatización avanzada: Sistema de control Siemens integrado que garantiza una mayor precisión y fiabilidad operativa. Estaciones de procesamiento independientes: Permiten un procesamiento flexible y eficiente en múltiples etapas, adaptado a flujos de trabajo complejos. Opciones de ancho de mesa: Disponible en anchos de mesa de 650 mm, 1000 mm o 1300 mm para satisfacer diversos requerimientos de producción. Opciones personalizables de transporte: Elija entre sistemas de transporte por vacío, semi-magnéticos o semi-vacío para una manipulación segura y fiable de las piezas. Limpieza de superficie: Elimina eficazmente óxido, óxidos y contaminantes superficiales, preparando las piezas para procesos posteriores. Seguridad mejorada para el operador: La estación de redondeo minimiza el riesgo de cortes y lesiones por bordes afilados. Acabado de alto rendimiento: Equipado con tecnología de abrasivo Scotch para obtener acabados suaves y homogéneos. Mayor vida útil de abrasivos: El sistema de oscilación neumática maximiza la duración de las bandas abrasivas y de los abrasivos tipo Scotch, reduciendo los tiempos de parada. Producción uniforme de radios: Seis ruedas flap aseguran un radio de borde uniforme en cada pieza, garantizando una calidad constante. Diseñado para el rendimiento. Pensado para la seguridad. Construido para la versatilidad industrial. TFON – Perfección superficial, siempre.

Sąlyga: naujas, Gamybos metai: 2025, - TFON Kantenverrundungs- & Oberflächenreinigungssystem -Materialkompatibilität: Geeignet für Baustahl, Aluminium und Edelstahl -Bearbeitbare Materialstärken: Verarbeitet Materialstärken von 0 bis 120 mm -Kantenverrundung: Erzeugt eine Kantenverrundung mit Radius 2 für glatte, sichere Kanten, die das Erscheinungsbild und die Funktionalität des Werkstücks verbessern -Präzisionssteuerung: Ausgestattet mit Siemens-Automatisierungssystem für präzise und gleichbleibende Prozesskontrolle -Unabhängige Stationen: Mehrere Bearbeitungsstationen ermöglichen vielseitige Einsatzmöglichkeiten – verschiedene Arbeitsgänge können simultan oder nacheinander erfolgen -Tischoptionen: Verfügbare Arbeitstischgrößen: 650 mm, 1000 mm oder 1300 mm – zur Anpassung an spezifische Produktionsanforderungen -Tischtypen: Flexible Konfigurationen wie Magnet-, Vakuum- oder Magnet-Vakuum-Tische gewährleisten sicheren Halt für verschiedene Materialarten und Werkstückgrößen -Plasma- und Sauerstofftechnologie: Moderne Plasma- und Sauerstofftechnik beseitigt zuverlässig schwere Grate und Schlacke nach dem Zuschnitt und sorgt für saubere, glatte Oberflächen -Oberflächenreinigung: Entfernt effizient Oberflächenverunreinigungen wie Rost, Oxid oder Zunder und bereitet Bauteile optimal für Folgeprozesse vor -Kantenverrundung für Beschichtung: Bereitet Werkstücke ideal für Lackier- und Beschichtungsprozesse vor, indem eine gleichmäßige und fehlerfreie Oberfläche geschaffen wird -Einsatzbereiche: Optimal für Stahl-Servicecenter, Energie-, Bergbau-, Bau- und Automobilbranche – maßgeschneiderte Lösungen für Schwerindustrieeinsätze - Gleichmäßige Ergebnisse: Sechs Lamellenräder arbeiten synchron und erzeugen eine gleichmäßige, einheitliche Radiuskante an jedem Werkstück -Pneumatisches Oszillationssystem: Verlängert die Lebensdauer der Schleifbänder und gewährleistet durch reduzierte Abnutzung eine konstante Bearbeitungsqualität Nwsdpfx Aehq A T Uoghep

Gamybos metai: 2021, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3815407, WEIGHT 8000 KG FEM ISO 1Am M4 KW 2.4/15.5 (50 Hz) MAXIMUM CAPACITY 16 TON Njdpot Nhqysfx Aghowp

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 600 mm, įėjimo įtampa: 400 V, bendras svoris: 3 560 kg, ruošinio aukštis (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm wide. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet. With the SER600 Super Edge Rounder from Q-Fin, it is possible to deburr, grind, edge-break, round, descale, remove oxidation layer, or apply a linear finish to sheet metal parts up to 600 mm in width. A combination of these operations is also possible. The throughput rate of the SER600 is 3 to 5 times higher than that of comparable machines. Nodpfx Agsl Dw D Eshewp This new 2025 model is equipped with a magnetic support and is therefore suitable for processing steel cut parts and other magnetic materials. The machine features 5 processing stations. Operation is conveniently controlled via an HMI touchscreen on the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this station removes burrs and/or discoloration from the product surface. If there are no burrs present, the grinding belt can be omitted or removed. It is also possible to use a finer grinding belt or finish with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations are fitted with 2 round brushes rotating in opposite directions. These brushes are used to remove sharp edges from the product by breaking edges or, through the unique combination of two brush systems, by creating a radius of up to R=3 mm. By installing special brushes, the SER600 with magnetic system is also ideally suited for removing the oxide layer from steel products or slag from plasma-cut products. We offer the machine in combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless steel extraction system operates wet, extracting grinding dust from stainless steel, steel, and aluminium, thus eliminating fire and explosion hazards. According to Q-Fin, it is the safest, simplest, and most sustainable method of extracting grinding dust. With the WES6000, there is no longer any grinding dust in the air and/or the working environment. We currently have 2 units of the SER600 in stock: - 1x new (Year of manufacture: 2025) - 1x only a few months old, like new (Year of manufacture: 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the construction and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Electrical connection of the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Gamybos metai: 1963, Sąlyga: paruoštas naudoti (naudotas), Lifting capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly maintained and inspected. Nwjdpfx Ajh I Edvsghep

Gamybos metai: 2002, Sąlyga: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Nwedpfet Hw Shox Aghjp Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Sąlyga: geras (naudotas), Gamybos metai: 1991, mašinos/transporto priemonės numeris: 91212037, Offer 24328 Technical Data: - Max. working width: 2540 mm - Max. material thickness at 40 kg/mm² tensile strength: 5 mm - Bending angle setting electronically preselectable: 0 – 135 ° - Automatic sequence control for a complete work cycle - Maximum opening width / stroke of the upper beam: 350 mm Nedpfx Aot St Szsghjwp - Height adjustment: - of the bending beam: 100 mm - of the lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Manual backgauge - Electric foot switch - Required space approx.: W 3800 x H 1650 x D 2500 mm - Weight approx.: 5500 kg