Krepšys paspauskite 100K RM1, 5

voran 100K RM1,5

Sąlyga: naujas, Nominal Output: up to 7,000 kg/h Electrical Connection: 3 kW 400V 50Hz (3 phases) Electrical Protection: 16 A slow-blow Dimensions: Length: 4,435 mm Width: 2,250 mm Height: 2,160 mm Discharge or Feed Height: 1,430 mm Belt Width: 1,100 mm Application Width: 320 - 870 mm Application Height (infinitely adjustable): 10 - 50 mm Weight: 3,400 kg Material: 1.4301 / AISI 304 Juice Yield: up to 80% (depending on fruit variety) Belt Speed: 1.2 - 4.5 m/min Contact Time: 1.5 - 6 min Water Consumption for Cleaning: 20 l/min (with continuous cleaner operation) Connections: Wastewater Connection: Ø 75 mm Juice Outlet Connection: DN 40 Juice Outlet Height: 200 mm Ihedpfxodix N Hs Af Iet Wastewater Outlet Height: 100 mm Pomace Discharge Height: 800 mm Suitable for pome and stone fruit Scope of Delivery: High-pressure cleaner, compressor Including driven brush rollers (top and bottom)

Gamybos metai: 2025, Sąlyga: naujas, comprising: - Trailer - High conveyor with removable hopper - Pomace conveyor belt for pomace discharge - Wash elevator KWEM 2000 - Belt press KEB 500 Ihodjcl Tvgepfx Af Iet - 2 x 300 L tanks with insertable sieve - Pasteurizer PAS 750 Oil - Bag-in-Box filler KBF 2000 for mobile unit - Accessories such as pumps, air compressor, high-pressure cleaner, etc.

Sąlyga: naujas, Nominal capacity up to 2000 kg/h Iodob I Ubwjpfx Af Ijht Motor power 1.5 (2.0) kW (hp) Electrical connection 400V 50Hz (3 phase) Electrical fuse 16 A Length 1600 mm Width 700 mm Height 2100 / 2350 mm Feed height 800 mm Weight 200 kg Material 1.4301 / AISI 304 Cleaning connection ½" internal Wash tank connection 2" external Fruit discharge height 1545 mm

Sąlyga: naudotas, Gamybos metai: 2014, Herma automatinė etiketavimo mašina Ihodpfxovb Ntks Af Ist

Gamybos metai: 2024, Sąlyga: naujas, Der gewonnene Saft fließt in einen integrierten Auffangbehälter unter der Presse. Anschließend befördert eine Pumpe den Saft aus der Presse in den gewünschten Tank zur weiteren Verarbeitung. Der Pressvorgang erfolgt kontinuierlich. Leistung: 3.000 kg/h. Das revolutionärste Merkmal unserer POWERPRESS-Bandpressenlinie ist, dass die Bandpressen über eine integrierte Pumpe und einen Saftauffangbehälter verfügen. Dadurch sparen Sie Kosten und benötigen keinen zusätzlichen Safttank und keine separate Pumpe, was Platz spart und zusätzliche Ausgaben vermeidet. - Die Saftausbeute bei Äpfeln mit unserer Bandpresse 3000 beträgt ca. 75 %. - Im Saftauffangbehälter ist ein Filtersieb integriert, das den Saft filtert und ein klares, reines Endprodukt gewährleistet. - Die Bandpressen arbeiten vollautomatisch: Ist der Maischezulauftank voll, schalten sich alle vorgelagerten Maschinen automatisch aus. Wenn der Safttank gefüllt ist, fördert die Pumpe den Saft automatisch in die vorgesehenen Lagertanks. Iedpfx Aeq Nl Aqjf Isht - Die Bandpresse 3000 wird mit einer Hochdruckwaschanlage geliefert, die das Band der Maschine kontinuierlich reinigt. Unser Bandwaschsystem ist einfach konstruiert, enthält keine Motoren oder Getriebe und verlängert dadurch die Lebensdauer sowie reduziert die Wartungskosten. - Das pneumatische Anheben der Sicherheitsabdeckung ermöglicht einen einfacheren Zugang bei Reinigungsarbeiten. - Nach der Arbeit sollte die Bandpresse manuell mit einem Wasserstrahl gereinigt werden. Der komplette Reinigungsprozess dauert etwa 15–20 Minuten. Die Reinigung ist einfach, alle Teile der Bandpresse sind werkzeuglos leicht entnehmbar. - Die Bandspannung ist einstellbar. - Die Maschine besteht vollständig aus Edelstahl und verfügt über verstellbare Füße für eine komfortable Handhabung. - Die Reinigung ist einfach, da es keine geschlossenen oder unzugänglichen Bereiche gibt und alle Teile leicht montierbar sind.

Gamybos metai: 2025, Sąlyga: naujas, Rated capacity 3,000 kg/h (depending on fruit type & operating conditions, up to 6,000 kg/h possible) Yield up to 75% Belt width/length: 1,000 mm / approx. 7,000 mm Ihsdpfx Afoygmwe Ist Working width/height: 900 mm / 0–50 mm, infinitely adjustable Belt speed: infinitely adjustable 1.0–5.2 m/min Electrical connection: Drive motor 2.2 kW, 400V Washing arm motor 0.25 kW, 400V Water consumption: 3 l per operating minute Weight: approx. 2,300 kg Dimensions (LxWxH): 2,750 x 1,890 x 1,690 mm without high-pressure cleaner and without compressor

Sąlyga: naujas, Gamybos metai: 2025, Container 150 l heat-insulated with 13.5 kW / 400 V heater with automatic temperature cut-off, frame, bag-in-box filling unit with bag holder * Simple, safe, optimal price-performance ratio * No temperature fluctuations * Exceptionally gentle heating thanks to large heating surface 0.4 m² * With thermostat: switches off when set temperature is reached * Height-adjustable stainless steel frame – the container is completely emptied "Free time" during heat-up phase approx. 40 min for 150 l Ihsdst U H Nropfx Af Iet Hourly output approx. 150 l Also available with 18 kW / 400 V heater – hourly output 180 l Two-way bottle filling available No 400 V connection? Pasteurizer also available with gas condensing boiler. ##### RINK – Pasteurization systems for over 30 years Proven technology – over 500 units in operation worldwide

Gamybos metai: 2024, Sąlyga: naujas, The semi-automatic filler is the ideal solution for small businesses producing up to 5,000 Bag-in-Box units per year. The unit is equipped with an electromagnetic flow sensor, an electronic control panel for programming the filling volume (minimum 1 liter) and performing calibration, as well as a self-priming pump with rubber impeller EURO 20. At the start and end of the cycle, vacuum operation must be carried out by the operator, and nitrogen injection is managed via two manual pulse valves. Opening and closing of the tap is performed using the two standard stainless steel tools supplied. A drip collector buffer is included. The user selects the desired fill quantity and activates the switch to initiate the filling cycle. The filler executes a complete cycle: opening the valve / starting the pump / stopping the pump / closing the valve. • Touch screen operation for programming capacity and calibration • Digital flow meter max. 7,000 l/h • Stainless steel filling head • Pulse valve for manual nitrogen injection Iedpstpxtujfx Af Ioht • Locking system for the filling head • Drip-free filling • Automatic start and stop • Dual semi-automatic system for connection opening and closing • Capability for filling flexible bags or pouches (tall or short type) from 1 liter capacity • S/S – Suitable for cleaning cycle (CIP) Technical Data: • Power supply: 220V 50-60 Hz • Suitable for: Ø 20 – 25 mm • Capacity: 5 L/h - 150 pcs • Capacity: 10 L/h - 100 pcs • Capacity: 20 L/h - 40 pcs

Gamybos metai: 2026, Sąlyga: naujas, mašinos/transporto priemonės numeris: 1234, Semi-automatic filling machine for soft packaging The semi-automatic filling machine BIB‘UP® is ideal for small to medium-scale production of soft packaging such as BIB (bag-in-box) with 2 to 20 liters and pouches with 1.5 to 3 liters. Also available without machine frame and without pump. Features: Three operating stages: removal of the fitting, cycle start (package air evacuation, counting and filling, injection, probing, nitrogen flushing at the end of the cycle), reinsertion of the fitting High working speed and performance Reliable, mobile, and very easy-to-operate filling machine BIB 3L bag: 280/290 cycles per hour 5L bag: 250/260 cycles per hour 10L bag: 200/210 cycles per hour 15L bag: 160/175 cycles per hour 20L bag: 140/150 cycles per hour Pouch 1.5L: 270 cycles per hour 3L: 245/250 cycles per hour Iodpjiu Hxkofx Af Ijht Technical specifications: Liquid throughput: 82 hectoliters/hour up to 0m (standard version), 125 hectoliters/hour up to 0m (optional) Air pressure min./max.: 5 bar / 8 bar Dry air supply: 7 to 10 bar Nitrogen supply: 1 to 4 bar Nitrogen pressure regulation: 0.2 to 0.4 bar Air flow rate: 7 m³/hour Power supply: 400V 3P+E, 50 Hz (standard version) Pulse counter: 75.3 counts per liter (standard version) Connection: 40 mm MACON diameter Noise level < 86 dB Space requirements: Depth: 1110 mm Height: max. 1770 mm Width: 745 mm Weight: 155 kg

Sąlyga: naujas, Washing unit WA LC40 with pulp mill RM40 for belt press EBP420, EBP500, EBP580 Rated capacity up to 2,000 kg/h Motor power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phase) Electrical protection 16 A Length 2,000 mm Iodpfx Afeb Ncmfs Isht Width 700 mm Height 2,200 mm Feed-in height 800 mm Weight 280 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2" internal Connection for washing tank 2" external Pulp discharge height 1,250 mm Fruit discharge height 800 mm Scope of delivery: 7mm, 9mm, and 12mm cutting...