2013 Vollmer QWD 750 H

Vollmer QWD 750 H

Būklė: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. Duodpfx Acjh Rdwxe Dor The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Labai geros būklės, 5 ašių įrankių galąstuvas parduodamas dėl nenaudojimo! Dodpsxw Sxkofx Ac Dour

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Universal Tool Grinding Machine Michael Deckel S11 – Very Good Condition! Technical Data: >> Year of manufacture: 1992 Dsdpfxjm E T Ane Ac Djur >> Serial no.: 1651 Clamping Range: >> Clamping table surface of the tool slide: 500 x 180mm >> Max. tool diameter between centers: 130mm >> Max. tool diameter with cantilever clamping in the universal dividing head: 620mm >> Max. tool length between centers: 270mm >> T-slot base width (machine stand): 12mm >> T-slots (grinding head, tool slide, and accessories): 8mm Movement Range: >> Working travels Grinding stroke: 190mm Grinding stroke for helical grinding: 190mm Cross movement of the tool slide: 100mm Vertical adjustment of the grinding head: 325mm Longitudinal adjustment of the grinding spindle: 5mm >> Coarse adjustments Tool holder: 220mm Grinding head carrier: 800mm Universal dividing head on tool slide: 330mm >> Swivel angles Grinding head carrier: 360 degrees Grinding head: 360 degrees Tool holder: 360 degrees Grinding Spindle: Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10000 rpm Max. grinding wheel diameter: 125mm Max. cut-off wheel diameter: 200mm Dimensions: Weight: 520 kg Dimensions (depth x width x height): 800 x 1100 x 1760mm Space requirement (including operation): 2.5 x 2.3 m Equipment and accessories: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding attachment SK40 >> Manual handwheel device for tool slide >> Suction device >> Machine lamp About the machine: Offered for sale is a universal tool grinding machine, brand Michael Deckel S11. The machine is suitable for precision grinding of high-accuracy components. The S11 enables fast, economical, and flexible grinding of single parts and small batches – all with the highest level of operating comfort. The Deckel S11 is in very good condition, mechanically and electrically tested. Take this opportunity to view and test the machine under power on site.

Būklė: naudotas, Gamybos metai: 2007, Suitable for the automatic machining of PCD-tipped milling cutters, shank tools, and disc-shaped tools such as saws, milling cutters, etc., using the wire electrical discharge machining (EDM) process. Accessories: - Full enclosure - Cooling unit for dielectric fluid - Automatic fire extinguishing system - N181 extraction unit - Probing system - Machine lamp - Automatic central lubrication - Workpiece holder ISO50 - Measuring arbor Maximum milling cutter outer diameter: 250 mm Maximum cutting length: 260 mm Shank tool diameter: 10 - 250 mm Maximum outer diameter of disc-shaped tools: 250 mm Maximum tool weight: 20 kg X-axis travel: 275 mm Y-axis travel: 300 mm Dujdpfx Ajwtmg Djc Der W-axis travel: 200 mm A-axis spindle taper: ISO 50 E-axis swivel range: 180° Machine footprint: 2535 x 2200 x 2220 mm Approx. weight: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) Colour: grey RAL 7045/7047

Būklė: naudotas, Gamybos metai: 2004, Tinka automatiniam HSS ir segmentinių pjūklų bei kietmetalių (VHM) pjūklų galandimui, naujam dantavimui ir nuožulninimui naudojant keramines šlifavimo diskus arba giluminiam šlifavimui CBN ar deimantiniais diskais. Priedai: - Pilnas uždangalas, - Pjūklų diskų magazinas su 3 diskinėmis krūvomis po 250 mm aukščio (po apie 35 pjūklus kiekvienoje) #9007511, - Įrenginys automatiniam pjūklo diskų nuožulninimui nuo Ø 145 mm, - Automatinis šlifavimo disko įvėrimas, Djdsw I Sk Nepfx Ac Dsur - Automatinė gaisro gesinimo sistema, - Automatinis centrinis tepimas, - 400 l aušinimo skysčio sistema su filtru, - Apšvietimas, - Alyvos surinkimo latakas, - 3 pjūklo laikikliai (krovikliai). Pjūklo diametras: 40–710 mm Dantų žingsnis: 1–55 mm Dantų skaičius: 2–998 Disko storis: max. 8 mm Šlifavimo disko diametras: 200 x 32 mm Energijos sąnaudos: 10 kW (400 V / 50 Hz) Svoris: apie 3200 kg Matmenys: I x P x A = 1198 x 1750 x 2015 mm Spalva: mėlyna/pilka RAL 7047 / mėlyna RAL 250-50-20.

Būklė: naudotas, naudotas Michael Deckel S11 – visiškai veikiantis Dujdpsx Hyn Iofx Ac Der

Būklė: naujas, Gamybos metai: 2026, Device designed for cooling laser tubes in CO2 laser plotters using a refrigerant chiller unit. The CW5200 chiller maintains the water temperature at the correct level. With this cooling, the tube is provided with stable operating parameters. The CO2 chiller ensures optimal operating conditions for the laser tube, effectively protecting it from overheating and damage. This device is intended for individuals or companies where the laser plotter is a daily work tool. Technical specifications: - Power supply: 230 V Dusdpfx Acsg Nkvrs Dsr - Power consumption: 0.25 ~ 3.1 A - Compressor power: 0.59 kW - Cooling capacity: 1.7 kW / 5783 Btu/h / 1457 Kcal/h - Coolant quantity: 360 g - Tank capacity: 6 L - Connections (inlet/outlet): 10 mm - Max. operating height: 12 m - Max. flow rate: 13 L/min - Weight: 26 kg - Dimensions (L x W x H): 58 x 29 x 47 cm Protections: - Compressor overvoltage protection - Water flow alarm - Overtemperature alarm The listed price is NET. Shipping costs are not included. For more information, please contact us by phone or email. We invite you to see our full offer on our website.

Būklė: naudotas, Gamybos metai: 2019, Suitable for the automatic grinding of carbide-tipped circular saw blades on both face and back in a single setup. All common tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in a single pass. Accessories: • Full enclosure • Wet grinding device • System for robotic operation with automatic loading door Djdpfx Acjyvgf De Djur • Loader ND 230 • Measuring device for saw blade inspection • Chip divider grinding device • Infinitely variable grinding speed of both grinding spindles from 1600 – 5500 rpm • Grinding speed and path per processing surface on the tooth can be set infinitely variable • Central automatic lubrication • Software package for oscillation grinding at rake and clearance angles • Automatic closure flap • Automatic fire extinguishing system • Electrostatic oil mist separator N281 • Measuring tool • Saw blade holder with guide bush Ø 16 mm for saws >ø180 • Saw blade holder with guide bush Ø 16 mm for saws >ø320 • Grinding wheel mounting flange for chip divider • Centering ring for mounting pin Ø 16 mm for saw bore Ø 32 mm • Centering ring for mounting pin Ø 16 mm for saw bore Ø 40 mm • Centering pin Ø 10 mm • Machine lamp • Saw blade blow-off device • Data entry station DES 400 • 3 loading trolleys with 30 mm mandrels • Oil collection tray • Automatic central lubrication Technical data: Saw blade diameter: 200 – 840 mm Bore diameter: from 16 mm Blade thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting edge length: up to 25 mm Rake angle: from -35° to +20° Clearance angle: 0° - 25° Back bevel grinding: up to 45° Face bevel grinding: up to 30° Negative face bevel grinding: up to 30° Tooth height difference: any Grinding wheel diameter: max. 200 x 32 mm Dimensions (W x D x H): 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) Color: grey RAL 7045 / grey RAL 7047

Būklė: naudotas, Aiguisoir pour scies circulaires / scies à refendre IDL000829 Djdpfx Acovlczvo Dour - fabricant : IMW

Būklė: naudotas, Gamybos metai: 2008, Tinka automatiniam PKD deimantais įdėtais frezų, kotinių įrankių, disko formos įrankių, tokių kaip pjūklai, frezos ir kt., apdirbimui vieliniu elektroerozijos būdu. Priedai: - Pilnas apdangalas - Išorinis kompiuteris su trajektorijų valdymu ir Exprog programine įranga - Dielektriko aušinimo agregatas - Automatinė gaisro gesinimo įranga - Automatinis centrinis tepimas - Ištraukimo įrenginys - Matavimo jutiklis - Mašinos lempa - Ruošinio laikiklis SK 40 - Matavimo veržlė SK 40 Didžiausias frezos išorinis skersmuo: 320 mm Kotinio įrankio skersmuo: 10–320 mm Diskinių įrankių išorinis skersmuo: max 320 mm Pjovimo ilgis: max 480 mm Įrankio svoris: max 20 kg X ašies eiga: 500 mm Y ašies eiga: 300 mm W ašies eiga: 200 mm A ašies sukimosi diapazonas: 360° E ašies pasukimo diapazonas: 180° Duedpoxy Rxhsfx Ac Djr Mašinos užimama vieta: 2535 x 2200 x 2280 mm Svoris apie: 4800 kg Prijungimo galia: 5,4 kW Spalva: pilka RAL 7035/7043