Vieno veleno smulkintuvas Vecoplan V-ECO 900

Vecoplan V-ECO 900

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Bljdpfx Ajvgrh Ujahed Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Sąlyga: naujas, The solution for shredding large, long pipes and profiles. The ZRS series is specifically designed for the size reduction of pipes with diameters up to 1,300 mm made from various materials such as PE, PP, and PVC. These machines are capable of directly shredding plastic pipes up to 9 metres in length without the need for pre-cutting or sawing. At the core are rotors with diameters up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low rotational speeds. Blodpjghgd Isfx Aahod The pipe is inserted into a closed feed trough, where it is pressed against the rotor by a hydraulic pusher. The pre-shredded material is then conveyed by the shredder via a conveyor belt to a granulator. The granulator further processes the material into directly re-usable regrind. The entire system is operated automatically via a central control unit. Additional advantages of the system include low energy consumption, avoidance of power peaks, and minimised risk of accidents during pre-shredding.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, veikimo valandos: 1 530 h, Funkcionalumas: visiškai funkcionalus, galia: 129 kW (175,39 AG), Parduodamas Arjes Impaktor 250 EVO Blodpfx Aaew Nyt Iehod Metų gamyba: 10/2022 Darbo valandos: 1530 Įrengta mentelinė ašis skirtai medienai, plastikui, komunalinėms atliekoms ir pan. Taip pat pridedama ir betono ašis. Įrenginys pilnai veikiantis ir gali būti apžiūrėtas darbo metu.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 12786 040, bendras svoris: 20 000 kg, rotoriaus skersmuo: 640 mm, bendras ilgis: 4 900 mm, bendras aukštis: 2 600 mm, bendras plotis: 4 100 mm, rotoriaus plotis: 2 000 mm, galia: 203 kW (276,00 AG), sukimosi greitis (maks.): 340 aps./min, įėjimo srovė: 415 A, Įranga: sūkių greitis be galo kintamas, The Vecoplan VAZ 2000 M F-T is a powerful single-shaft shredder. This robust shredder offers an efficient and reliable solution for a wide range of applications. Fields of application: - Household waste Bledpsurkc Refx Aahjd - Plastics - Paper With its proven technology and high throughput capacity of 4-5 tons per hour, the VAZ 2000 M F-T is the perfect choice for size reduction and volume reduction in disposal and recycling processes. The images are for illustrative purposes only. They do not show the actual machine being offered, but serve merely as examples of what the machine may look like after refurbishment. Price upon request.

Sąlyga: naujas, Klanke Supercut roll slitter for efficient shredding of reject rolls. Blsdpfx Aon I Rgpeahed Features: - Automatic safety interlock - Emergency stop pull cord - Siemens PLC Technical specifications: Blade length: 3000 mm Cutting channel opening: 1200 mm Motor power: 15 kW Cutting force: 50 t Made to order. Price and further information available on request. We will be happy to provide you with a non-binding offer.

Sąlyga: naudotas, Gamybos metai: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-maintained Condition For sale is a Lindner Urraco 95 DK from the year 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained, ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. — Equipment / Scope of Delivery Bledpfxsx Nkhqe Aahjd • 1 set of armoured shafts HW 8/10 with comb scrapers and secondary breaking bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with comb scrapers and secondary breaking bar, also for scrap and waste • DK4 equipment with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: Crawler tracks, hydraulically driven Applications: Scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: • Well-maintained machine • Fully operational, technically sound • Sale as inspected on site Additional information / Maintenance history The machine was under a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally according to the manufacturer’s specifications and is fully documented. Notes: • Sale is conducted without any guarantee or warranty. • No returns or renegotiations. • Sale subject to prior sale. All information is provided without obligation. The seller accepts no liability for errors, incompleteness, or changes to the information. Sale is exclusively subject to prior sale.

Sąlyga: geras (naudotas), Gamybos metai: 2020, Rotor diameter: 260 mm Feed opening approx. 800 x 1200 mm Rotor length approx. 800 mm Motor: 18.5 kW Technical data available on request Bljdpfx Aowzaizoahed Required space approx. 2050 x 1550 mm All information without guarantee

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, rotoriaus skersmuo: 400 mm, rotoriaus ilgis: 1 000 mm, galia: 37 kW (50,31 AG), sukimosi greitis (maks.): 100 aps./min, darbinis plotis: 1 000 mm, Overhauled single-shaft shredder Rotor diameter: 400 mm Working width: 1000 mm Drive power: 37 kW Bedpfx Aovnl Uksahsld Hydraulics: 1.5 kW Rotor knives: 48 pcs Stator knives: 4 pcs – adjustable

Sąlyga: paruoštas naudoti (naudotas), 🔧 Hauptspezifikationen Schneidsystem: Vierwellen-Konfiguration mit zwei Schneidwellen und zwei Räumwellen. Bljdpswnx Uijfx Aahed Schneidscheibendurchmesser: ca. 280 mm (11 Zoll). Abmessungen der Schneideinheit: Arbeitsbreite 1.000 mm, Länge 700 mm. Aufgabeöffnung: ca. 1.400 mm x 1.600 mm. Motorleistung: In der Regel ausgestattet mit zwei 18,5 kW Motoren. Betriebsgeschwindigkeit: Langsamlauf bei ca. 25 U/min für hohes Drehmoment und geringe Geräuschentwicklung. Gewicht: ca. 2.500 kg.

Sąlyga: naujas, - Motor power 9 kW - Control: PLC-supported, two-hand safety operation - Cutting force: 35 t - Splitter table: straight design - Cutting channel: - Max. blade length L = 2000 mm - Max. opening H = 1200 mm Blodogl Ac Sspfx Aahed - Machine weight approx. 4 t - Colour finish: RAL 5012 – light blue - Hand protection grid around the control panel area and on the opposite side - Forklift pockets included (for easy transport of the machine by forklift truck) Machine in stock, available immediately Price and further information on request