Konteinerių vežimas

Van Hool Tank chassis / ADR / BPW + DISC / 20-30 FT

Būklė: geras (naudotas), ašių konfigūracija: 3 ašys, pirmoji registracija: 11/2015, pakaba: oras, spalva: pilkas, Gamybos metai: 2015,

Būklė: naudotas, Screw Compressor KAESER Type BS 50 Serial No. 402852 Year of manufacture: 1990 Volume flow rate: 5 m³/min Pressure output: 7.5 bar Main motor power: 30 kW Iajdpfxeiyu Ifs Ab Sjp Power supply: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.9 operating hours (read off) - 749.0 load hours (read off) - Sound-insulated Space requirement (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was used as a backup compressor and has only few operating hours

Būklė: geras (naudotas), ašių konfigūracija: 3 ašys, pirmoji registracija: 03/2018, pakaba: oras, spalva: raudona, Gamybos metai: 2018,

Būklė: geras (naudotas), Manufacturer: Takraf / Zemag Rotor Diameter: 1,250 mm Roller Width: 2,000 mm Iajdpfog Sntyox Ab Sop With drive Currently being overhauled, blasted, and painted. For more detailed information, please refer to the PDF below.

Būklė: geras (naudotas), Manufacturer: Takraf / Zemag Type: ZWB 630 x 800 Roller Diameter: 630 mm Roller Width: 800 mm (smooth roller) Isdpspxn D Dofx Ab Seap Supplied with frame and drives.

Būklė: naujas, bendras svoris: 34 000 kg, ašių konfigūracija: 2 ašys, Gamybos metai: 2025, Įranga: ABS,

Būklė: paruoštas naudoti (naudotas), Hazemag smūginis malūnas AP 4, pilnai su pavaros bloku, atsarginiu rotoriu ir atsarginėmis dalimis. Galingumas: apie 150 t/val. Galia: 35–120 kW. Atidarymas: 700 x 1000 mm. Svoris: apie 11 000 kg. Specialus pasiūlymas dabar – 15 000 €. Iasdpjuimvyofx Ab Ssp

Gamybos metai: 2013, būklė: naudotas, We hereby offer you a used PET bottle crusher from the manufacturer BOREMA, model R-1200 F, year of manufacture 2013, for residual emptying, degassing, and pre-compacting of PET bottles with volumes from 0.3 to 2.5 liters. The machine is equipped with a chassis and can be driven into and out of the feed chute of your baler. The throughput capacity is approximately 85,000 bottles or about 3 tons per hour. The following technical information is available: Manufacturer: BOREMA Umwelttechnik AG Iaodpfju Thpnox Ab Sop Model: R-1200 F (with hopper for inserting and removing the compactor) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Pre-fuse: 40 A Design: Continuous flow system Function: Double-rotor press system Rotor pre-tension: Pneumatic, approx. 16 t Overload protection via anti-blocking system Input material: Single-use and reusable PET bottles, 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 L capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air supply: G1/2", 8 bar, 40 L/min Compaction ratio: 1:3 Flange dimensions (internal): 972 x 1,220 mm (L x W) Infeed opening: 565 x 1,280 mm (L x W) Weight: approx. 2,500 kg Applications: Thanks to the chassis, the PET compactor can be positioned in the feed chute of your baler as needed, ensuring residual emptying, degassing, and pre-compacting of bottles and packaging. When changing materials, the PET compactor is simply removed from the feed chute, allowing materials such as paper, cardboard, films, etc., to be compacted without the unit. BOREMA PET Compactor Process: Plastic containers are fed in by two rotating shafts. One shaft is pneumatically pre-loaded with two air bellows and presses the PET bottles against the second rotating shaft with 16 t of force. The sealed plastic containers are compressed, ruptured, and degassed in the process. Residual liquids drain away, and the pre-compacted material drops into the baler. In case of contaminants, the pneumatically pre-loaded shaft yields, allowing the contaminant to pass through without interruption. Key advantages over conventional PET perforators with punch pins or knives: The BOREMA process is considerably more efficient and less prone to wear compared to conventional PET perforators with punch pins or knives. The major advantage is that contaminants (e.g., metal parts, stones, bottles with frozen contents, wood pieces) pass through the pneumatically yielding rotor shaft without interrupting operation or causing major damage. In conventional perforators, pins or knives can break off or become severely jammed with contaminants, requiring shutdown and costly repairs. Notes: Complete documentation (Operating Manual, CE, electrical/hydraulic diagrams) is available. Inspection by appointment is possible. No liability is assumed for technical data or possible errors.