šildymo krosnis, krosnis, paleidimo krosnis

Vötsch VAW 60/100

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Dedpfxefxyhfo Aaaoup Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: labai geros būklės (naudotas), Multiple 150 m³ underground steel storage tanks (fire water tanks) Dusdpfxofnh Tge Aaasp Capacity: 150,000 litres Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground firefighting water tanks in accordance with DIN 14230: The tank is equipped with a fire water suction connection according to DIN 14244, featuring an installed firefighting coupling / permanent coupling A as per DIN 14319, version Form B, without dip tube. Additionally, the tank includes a vent flange connection (DN 100) with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground. - The tank is emptied, cleaned, and externally coated with bitumen paint by us at the factory - On request, we can provide the tank with a full internal bitumen-based lining (for corrosion protection) or an internal epoxy resin coating Cost-effective delivery with our own truck is possible. Simply provide us with the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. Should you need further information, please call us or send an email to b.barth (a) barth-tank.de

Būklė: naudotas, Rotary vane vacuum pump – oil-lubricated Manufacturer: Leybold Model: Sogevac SV 200 Cat. No.: 10927 Condition: Fully overhauled Warranty: 12 months Includes: Initial oil fill (mineral oil), operating manual with spare parts list Djdocnyy Hopfx Aaaoup Voltage: 50/60Hz 230–400/460V Motor rating: 4 kW Nominal pumping speed: approx. 200 m³/h Ultimate pressure without gas ballast: approx. 0.08 mbar Availability: Ex stock

Būklė: naudotas, Gamybos metai: 2000, Grinding length: 800 mm Centre height: 150 mm CNC control: FANUC Grinding wheel dimensions max.: 400 x 63 x 127 mm Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45/-15° degrees Workpiece spindle speed: 22-313 / 51-750 rpm Workpiece headstock swivel: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed rate: 0 to 7.5 m/min Machine weight: approx. 4.0 t Required space (LxWxH): approx. 3.7 x 2.2 x 1.9 m Includes: - Coolant system - Enclosed steady rest Dusdpfsu Hag Nex Aaaop - Diamond dresser - Open steady rest - 3 grinding wheels - 3 flanges - Internal grinding spindle attachments

Būklė: naujas, - Manually operated - Shaft size: 30 mm - Weight: 30 kg Duodpfelwpr Rsx Aaasp

Būklė: naudotas, CNC cycle-controlled lathe HARRISON Type Alpha 400 Plus Mach. No. P30180/150 Year of manufacture: 1998 Centre distance 1250 mm Swing over bed 400 mm Centre height 200 mm Swing over cross slide 245 mm Max. turning diameter in gap 585 mm Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock taper MK 5 Spindle bore 54 mm Dedpoh Hvk Asfx Aaajup Spindle nose size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Level 1): 15-275 rpm Spindle speed range (Level 2): 35-795 rpm Spindle speed range (Level 3): 110-2500 rpm Feed rate X and Z: 0.03 - 0.6 mm/rev. Rapid traverse X-axis max. 2000 mm/min. Rapid traverse Z-axis max. 4000 mm/min. Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power 7.5 kW Electrical connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC - Language in French (France) - Automatic 3-range gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with various transmission ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX quick-change toolholder size B with 2 tool inserts - 1 live center - 1 quick-action drill chuck RÖHM, 3-16 mm - Hinged chuck guard - Hinged working area safety doors - Swarf tray with coolant device beneath the machine bed - Control cabinet fixed to the machine - RS 232 interface Required space (L x W x H) 2600 x 1450 x 1550 mm Weight 1950 kg Good condition

Būklė: geras (naudotas), Gamybos metai: 1988, šlifavimo ilgis: 1 000 mm, šlifavimo plotis: 550 mm, šlifavimo aukštis: 400 mm, šlifavimo disko skersmuo: 400 mm, šlifavimo ratuko plotis: 100 mm, Manufacturer: ELB-SCHLIFF Dusdpfx Aasu Rqynjaop Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic chuck SAV 1000 x 400 mm Fine pole pitch 45-5 mm Electronic straight dressing device with compensation Vertical digital readout Mounting for grinding wheel max. 400 x 100 x 127 mm Spindle motor 7.5 kW 1435 rpm Wedge-shaped leveling pads Coolant system with universal paper band filter Complete documentation

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, 12 mėnesių garantija, demonstracinis įrenginys, labai gera būklė, tik apie 250 darbo valandų, galima pristatyti nedelsiant -atitinka DIN EN 1539 reikalavimus tirpiklių turintiems produktams -Maksimali temperatūra: 300 °C -Kaitinimo kamera: 750 x 750 x 750 mm (plotis x gylis x aukštis) -Išorės matmenys: 1510 x 1150 x 2200 mm (plotis x gylis x aukštis) -Temperatūros reguliatorius JUMO dTRON 04 -Leistinas didžiausias tirpiklio kiekis: 19,30 g -Šildymo galia: maks. 21,78 kW, prijungimo galia 22,5 kVA, vardinė srovė 32,6 A -Prijungimas: 400V 3L/PE 50Hz -Kabelis su 63A kištuku, taip pat galimas nuolatinis pajungimas, tokiu atveju apsauga 35 arba 50 A Dusdpfx Aaeiq Uv Neaop -1 vnt. grotelių lentynėlė komplekte -Svoris 550 kg -Dokumentacija Apžiūra mūsų sandėlyje pagal susitarimą. Krosnis, krosnys, pramoninė krosnis, konvekcinė krosnis, kameros konvekcinė krosnis, grūdinimo krosnis, šildymo krosnis, džiovinimo krosnis, temperatūrinė krosnis, dažų džiovinimo krosnis, tirpiklių krosnis

Būklė: naudotas, Gamybos metai: 2013, tekinimo skersmuo virš slankiojančio stalo: 435 mm, tekinimo skersmuo virš viršutinio vežimo: 245 mm, centro aukštis: 210 mm, plotis centre: 1 500 mm, bendras svoris: 1 700 kg, Technical specifications Manufacturer: Weiler Model: DA 210 AC x 1500 Year of manufacture: 2013 Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Center height: 210 mm Distance between centers: 1500 mm Spindle bore: 52 mm Speed range: 20 – 2,500 rpm, stepless Drive power: 10.5 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: 1.7 t Equipment • Infinitely variable speed control • HEIDENHAIN digital readout on 3 axes • 3- and 4-jaw chucks by Röhm Duro • Multifix quick-change toolpost + 10 inserts • Fahrion collet chuck + approx. 33 collets • Fixed and travelling steady rests • Various live and dead centers + drill chuck • Coolant system • Documentation Heidenhain ND 780 digital position indicator • 3-axis display for bed, cross, and top slide • Tool memory for 16 tools, with reference point per axis • Sum key for Z and Zo axes • Switchable between inch/metric • X axis travel can be displayed as radius or diameter • Delta key – “distance-to-zero” display • Display resolution up to 1 µm • "Freeze" actual position Djdpfxsykakpo Aaajup • Taper calculator All information without guarantee. A powered demonstration is possible at any time in our exhibition hall.

Būklė: geras (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 7853, X ašies eiga: 4 000 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 2 000 mm, stalo ilgis: 6 000 mm, stalo plotis: 2 000 mm, stalo apkrova: 17 000 kg, Lovio tipo frezavimo staklės | FPT Sirio-M50 - Heidenhain valdymo sistema - 60 vietų įrankių keitiklis Dujdpjxzzlhefx Aaaep - Aušinimo skysčio paruošimo / filtravimo sistema - Drožlių transporteris - Šaldymo įrenginys, gamintojas Deerosdassi (Italija) - Elektros valdymo spinta - Įrenginio apsauginis gaubtas Apžiūra galima bet kuriuo metu iš anksto susitarus.