Medienos smulkintuvas

Untha - not weima LR700

Sąlyga: beveik kaip naujas (naudotas), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic, stepless feed, 12–120 m/min. • Feed motor: 22.0 kW • 1st spindle below: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle below: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle below: 11.0 kW • All spindle motors with electronic brake • COMPLETELY NEW CUTTERHEAD SPINDLES • Spindle diameter: Ø 50 mm • Spindle speed: 6,000 rpm • 6 powered feed rollers in the table – hard-chromed • Spindles 1 + 6 + 7 + 8 + 9 with NEW counter bearings • Hydraulic counter bearing clamping • Spindles 2 + 3 + 8 + 9 with straight jointer • Spindles 4 + 6 pneumatic pressure • NEW feed rollers, D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty top pressure rollers – pneumatic • Heavy-duty side pressure rollers – pneumatic • Automatic table lubrication – NEW • Central lubrication points • NEW standalone control panel, 5 m cable • NEW standalone control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram included + Many NEW spare parts/accessories Dimensions: • Total length: approx. 6,150 mm • Total width: approx. 2,160 mm • Machine weight: approx. 9,500 kg Power connection: • Total connected load: approx. 157 kW Condition: Machine as shown in photos – technically as-new Payment: Payable in full by bank transfer prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Offers & inquiries only with complete company details Nodpfx Ajtynpxoghewp Errors and prior sale excepted

Sąlyga: naujas, Gamybos metai: 2024, Super special price, as this machine was used during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale. Once it’s gone, it’s gone. Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, styrofoam, foam, or paper. A distinctive feature: the screw pre-compaction system ensures high briquette quality. For fast and easy installation, the C 140 is mounted on a stable base frame. Dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30–40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press - Powerful pressing mechanism with low-wear, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control Hydraulics - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Njdpfx Aelht H Esghjwp Container with agitator and geared motor - Screw channel with discharge auger and geared motor Accessories: - Briquette length monitoring, automatic on/off Location: 54634 Bitburg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, 6-axis industrial robot ABB IRB6640-205/2.75 Year of manufacture: 2012 Includes connection cables, teach pendant, IRC5 control cabinet, and robot arm. Nwodpfx Agjixqn Tshsp We have many other industrial robots in stock.

Sąlyga: naujas, Gamybos metai: 2024, ANGOMAC SOLID MULTIRIP SAW 600 mm feed opening Njdeh Ia Upjpfx Aghjwp Cutting height up to 120 mm Maximum cutting width 480 mm

Sąlyga: geras (naudotas), Good, used condition Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functional guarantee upon handover Nsdpfxet Hxudj Aghowp

Sąlyga: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 Features and technical data: Nsdpfxet Hagnj Aghewp Right-hand configuration Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5% / 50 Hz including: Press mechanism with feed cylinder, main cylinder, clamp cylinder Connection fitting for transport piping Chromed clamp Hydraulic tank 160 l with pump motor + valve control Oil temperature safety switch Base plate 1,040 x 1,040 mm with agitator + motor and Screw conveyor discharge screw + motor Side panels standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control system Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with fill level limit switch Material: Planer shavings, sawdust from solid wood, loose, clean and free of contaminants* Max. dimensions: 12 mm Throughput capacity: approx. 50 m³/year/ *Contaminant specification: Anything other than wood, wood pieces larger than 12 mm. Throughput capacity is highly dependent on the material. Average values are indicated. Depending on mix, moisture, and material characteristics! Application not or not fully known/specified. Machine is sold appropriately and according to requirements by a specialist dealer. In the event of heat build-up, the run time may be drastically shortened due to increased temperature. Availability: short notice Storage location: Solingen

Sąlyga: naudotas, Gamybos metai: 2011, veikimo valandos: 26 920 h, IRB 6640-235/2.55 Nodeim Si Aopfx Aghowp Year of manufacture: 2011 We are also pleased to offer this robot fully reconditioned upon request! For further information, please do not hesitate to contact us!

Sąlyga: naujas, Main features of the machine: The TOP CUT 500 band saw offers high-quality features and extensive capabilities, particularly for companies involved in wood processing on various scales. The machine provides unparalleled stability and solid construction. - Touch panel with electronic cutting height display - Control panel located at the front for easy and convenient operation - Cutting thickness electronically controlled and programmable - Cutting unit lifted on two motor-driven pistons - Infeed and return belt driven by a hydraulic variator - Hydraulic saw blade tensioning system - Pneumatic saw blade lubrication Nwedpfxsiim Tqe Aghop - Pneumatic pressure roller system ensures precise guidance - Stable steel machine frame guarantees precise operation - Cutting accuracy and repeatability up to 0.01 cm Technical specifications: Maximum workpiece dimensions: 520x300 mm Transport belt width: 495 mm Transport belt length: 5535 mm Maximum cutting height: 300 mm Minimum workpiece height: 5 mm Saw wheel diameter: 711 mm Saw wheel width: 45 mm Dust extraction nozzle diameter: 100 mm Feed speed: 0 - 13 m/min Blade dimensions: 5200 x 35-55 x 1.6 mm Voltage: 380 V Main motor power: 18.5 kW Total power: 21.5 kW Weight: 2400 kg Dimensions: 2800x2400x2000 mm

Sąlyga: naujas, Gamybos metai: 2024, Shredding shafts for Hammel 850 / Olnova 85 (ALL VARIANTS available) Contact us for enquiries! WERT GmbH manufactures exclusive shredding shafts for the processing of metal, wood, waste wood, roots, mixed construction waste, tires, construction debris, concrete, and end-of-life tires in various versions. "MADE IN GERMANY" We produce exclusively in Germany using only the finest materials. We stand out with our high manufacturing precision and quality. Delivery times as agreed. Nwsdpfxehpipdo Aghsp WERT GmbH is a metalworking company specialized in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Lindner, Eggersmann, Terex, and Keestrack. With our in-house design department and a highly qualified team, we offer tailor-made, innovative solutions that meet the highest quality standards. Our aim is to consistently fulfil our clients’ individual requirements through technological excellence and continuous improvement. We support companies from various industries, including waste management, recycling, and mechanical engineering, and strongly focus on long-term partnerships. With our reliable and high-performance shredding solutions, we help our customers to increase their efficiency and competitiveness.

Sąlyga: naudotas, rida: 34 275 km, galia: 110 kW (149,56 AG), pirmoji registracija: 10/2000, bendras svoris: 8 000 kg, kuro tipas: dyzelinas, spalva: žalia, pavaros tipas: mechaninis, emisijos klasė: euro2, Gamybos metai: 2000, sėdimų vietų skaičius: 3, Įranga: visų varančiųjų ratų pavara,