Ventiliatoriai Nežinomas 2004

Unknown

Sąlyga: naudotas, No. 3231 Extraction System with Briquetting Press Spänex SHB 50 Used Complete disposal system for residues from wood, paper, plastics, cotton, etc. The sawdust is conveyed directly from the filter unit into the chip bunker of the hydraulic briquetting press. After compaction, the briquettes are transported directly to the heating system. Technical data according to manufacturer brochure: Capacity: 50 kg/h (material-dependent) Gjdowqhwlspfx Abdsil Throughput: 0.45 m³/h Briquette shape: octagonal, 125 x 70 mm Motor power: 5.5 kW Compression ratio: 1:10 Moisture content: min. 8%, max. 20% Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, transport or installation Dismantling, loading, and transport by us available as an option Errors in description and price excepted To avoid potential misunderstandings, on-site inspections are possible and recommended by prior appointment Sale as is Technical specifications, condition description, year of manufacture and scope of delivery as per manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is provided on used machines; the goods are sold as seen Pictures and videos serve as examples and do not represent the actual scope of delivery Payment terms: prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Sąlyga: naudotas, Gamybos metai: 1996, Krašto storis: 0,4 - 12 mm Ritininio krašto storis: 3 x 45 mm arba 0,8 - 60 mm Minimalus ruošinio plotis: 65 mm Minimalus ruošinio ilgis: 160 mm Ruošinio storis: 10 - 55 mm Pasiūla: 13 m/min Išankstinis frezavimas (sujungimas) Klijų rezervuaras Quickmelt Klijavimo mazgas Nupjovimas Briaunos frezavimas Fasavimo frezavimas Spindulinis frezavimas Kampų kopijavimas Plokščia traukimo ašmenys Šlifavimo agregatas Staklių matmenys: 7450 x 1220 x 2400 mm Svoris: 3000 kg Sandėliavimo vieta: Nattheim Gijdpjvvkd Tefx Abdel

Sąlyga: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Tipas: Vienpusė briaunų klijavimo staklės Giodpfjxwwb Rjx Abdjl Gamintojas: BRANDT Modelis: Optimat KDF 550 C Metai: 2008 Vieta: Lietuva Sąlygos: kaip yra, ten kur yra Plokštės storis: 60 mm Briaunos storis: 8 mm Padavimo greitis: 11 m/min Matmenys (ilgis × plotis × aukštis): 5860,0 × 1560,0 × 230,0 mm Svoris: 2600 kg Padavimo greitis: 11 m/min Rušinės storis: 8–60 mm / briaunos storis: 0,4–8 mm / darbinis aukštis: 950 mm Elektros tiekimas: 400 V – 3 fazės – 50 Hz / pneumat. slėgis: 6 bar / triukšmo lygis: 80…87 dB(A) Ištraukimo diametras: 1 × 120 mm / 2 × 100 mm / ritinėlių tarpai: maks. 3,0 × 45 mm / 0,8 × 65 mm

Sąlyga: naudotas, Gamybos metai: 2012, CONTROL POWER CONTROL PC 20+ Plate height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid wood edge thickness (mm) 12 Feed speed m/min 20 Upper motorized rubberized belt Manual infeed guide Anti-adhesive unit Straightening unit Gluing with EVA adhesive Edge holder plate End trimming unit with automatic tilt adjustment Offset trimming and corner rounding unit with two motors Linear two-motor rounding unit Edge scraping blade Glue scraping blade Brushing unit Godpfx Abswwk Dujdeil

Sąlyga: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Biesse Akron 1400 briaunavimo staklės. Originali JK mašina prieinama demonstracijai: £10 000 + PVM Ši mašina skirta briaunų apipjovimui tiesiai arba su nuolydžiu iki 8 mm storio (ritėje maks. 3 mm). Šiuo metu įrengtos tiesios frezos, tačiau galima sumontuoti kombinuotas frezas spindulinei apdirbai. Godpfx Aboxrwm Nodoil Ši mašina NEAPVALINA kampų, tačiau turi šiuos mazgus: Išankstinis frezavimas. EVA karšto lydalo klijavimo sistema. Galu pjovimo pjūklai (tiesus arba nuožulnus pjūvis). Šiurkštus apipjovimas (viršus ir apačia). Tikslus apipjovimas (viršus ir apačia). Klijų siūlės grandikliai (viršus ir apačia).

Sąlyga: naudotas, Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, BIESSE Edgebanding Machine AKRON 1440-A Automatic single-sided edgebanding machine for applying and processing straight edges using coil material (melamine, PVC, ABS, veneer) and strip material (solid wood, HPL, sliced veneers, etc.). • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU aggregate (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edgebanding thickness (coil): 0.4–3 mm Edgebanding thickness (strip)*: 0.4–10 (12) mm Workpiece overhang: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x port Ø100 mm Compressed air connection: 7 bar Glue pot capacity: approx. 2 kg *Depending on selected aggregates - GLUING UNIT VC-511 Applies hot-melt adhesive to the workpiece, feeds the edge material onto the workpiece, automatically cuts coil material, and presses the edge precisely onto the workpiece, ensuring perfect positioning. Giedpjxzb Iijfx Abdsl - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs at 0° to 15° angles. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of synthetic material edges up to a maximum thickness of 3 mm. - PRE-MILLING UNIT RT02 Pre-mills the workpiece before adhesive application. Two high-frequency motors, each 1.8 kW, 12,000 rpm. - SCRAPING UNIT RB02 For post-processing thick PVC/ABS edges. - FLAT SCRAPER RC02 Unit for removing excess glue at the joint between edge and panel. Equipped with tracing rollers and a flat knife with electronic engagement. - BUFFING UNIT SZ02 For cleaning and polishing the workpiece edge using fabric buffing wheels. The unit adjusts automatically to the workpiece thickness. - SPRAY SYSTEM FOR ANTI-ADHESIVE AGENT ADZ02 Precision application of anti-adhesive agent via injectors, numerically controlled. - KIT PRO-GLUE The PRO-GLUE kit includes: • TEKNO-GLUE system for optimal adhesive application via: - Controlled glue roller contact. - Automatic retract in case of feed stop. - Automatic ON/OFF of gluing section. • REVERSE system for switching the glue roller between co-rotating and counter-rotating modes. Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue on machines equipped for EVA. NC Axis for Fine Trimming Unit Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system. Pair of multi-profile cutters for fine trimming: bevel 25°, R=2 mm + R=1 mm, and straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of tracer to match edge thickness. Adjustment via control system. Function for processing corners only. NC Axis for Scraping Unit Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system.

Sąlyga: naudotas, bendras plotis: 1 000 mm, bendras ilgis: 1 200 mm, bendras aukštis: 1 300 mm, - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Pagrindinio variklio galia [kW]: 15 - Pralaidumas [m³/h]: 12700 - Apsisukimų skaičius [aps./min]: 1450 - Jungties skersmuo [mm]: 400 - Išėjimo skersmuo [mm]: 400 - Transportavimo matmenys: 1200mm x 1000mm x 1300mm (ilgis x plotis x aukštis) - Transportavimo pakuočių skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas verslo subjektams Gsdpfxow Tzg Re Abdjil Pristatymas ir priėmimas mainais galimi bet kuriuo metu visiems pramonės sektoriaus įrenginiams

Sąlyga: naudotas, bendras plotis: 400 mm, bendras ilgis: 600 mm, bendras aukštis: 800 mm, Tuščiasvoris: 45 kg - Dokumentacija prieinama: Ne - CE sertifikatas yra: Ne - Serijos numeris: Op11.882 - Pagrindinio variklio galia [kW]: 2,2 - Srauto pajėgumas [m³/h]: 1200 - Vakuumas [Pa]: 3 - Apsisukimų skaičius [rpm]: 2840 - Jungties skersmuo [mm]: 140 - Išėjimo skersmuo [mm]: 135 Gedpfxsw Tzado Abdsil - Įtampa [V]: 400 - Srovės sunaudojimas [A]: 4,61 - Saugiklis [A]: 16 - Galia [kW]: 2,2 - Transporto matmenys: 600mm x 400mm x 800mm (ilgis x plotis x aukštis) - Transporto svoris [kg]: 45kg - Transporto pakuotės [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtuminis apmokestinimas: PVM yra atskaitomas verslininkams Pristatymas ir atpirkimas galimi bet kada visai pramonės sričiai Yorick Diebels