Motociklo priekaba

Unitrailer Motoanhänger MOTO 1

Būklė: naudotas, Gamybos metai: 1998, Tekinimo skersmuo virš lovos: 400 mm Tekinimo skersmuo virš stumdomosios atramos: 260 mm Tekinimo ilgis: 1500 mm Centras aukštis: 200 mm Atstumas tarp centrų: 1500 mm Veleno skylė: 50,8 mm Sukimosi greitis: 20–3150 aps./min Išilginės slankiosios atramos pastūmos: 0,01–3,24 mm/aps. Skersinės slankiosios atramos pastūmos: 0,005–1,62 mm/aps. Staklių svoris: apie 2 t Užimama erdvė: apie 3,35 x 1,4 x 1,9 m Darbinė įtampa: 400 V Prisijungimo galia: 7,7 kVA Su griebtuvu, Multifix ir skaitmeniniu indikatoriumi. Nedpfx Afsxp Rzbjxswg

Būklė: geras (naudotas), Sukimosi skersmuo virš staklių: 430 mm Sukimosi skersmuo virš suporoto: 220 mm Sukimosi ilgis: 1500 mm Pinolės skersmuo: 80 mm Pinolės eiga: 200 mm Galvutės pinolėje tvirtinimo kūgis: MK-5 Sukimosi greitis: 14 - 2240 aps./min Galia: 12,4 kVA Veleno anga: 60 mm Nsdpfx Afoy Hxq Uoxewg Staklių svoris apytiksliai: 2800 kg Šios TOS Trencin L&Z tekinimo staklės yra geros būklės. Priedai: - 3 ašių skaitmeninis indikatorius - 9 vnt. įrankio laikiklių - Sutepta luneta - Luneta iki D=110mm - 3 žandikaulių įgriebtas griebtuvas

Būklė: naujas, TC 205 x 1000 CVS Exhibition machine, color blue Technical Specifications: Swing over bed: 410 mm Centre height: 205 mm Swing over cross slide: 234 mm Swing in gap: 610 mm Bed width: 280 mm Distance between centers: 1000 mm Number of spindle speeds: 8 Speed range: 80 – 2000 rpm Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle taper: MT 6 Tailstock quill travel: 130 mm Tailstock taper: MT 4 Max. tool size: 22 mm Cross slide travel: 225 mm Top slide travel: 130 mm Inch threads: 2 – 72 T.P.I Metric threads: 0.2 – 14 mm D.P. threads: 4 – 44 D.P. Module threads: 0.3 – 7 MOD Longitudinal feed: (24) 0.035 – 0.5 mm/rev metric; (24) 0.0014 – 0.020 inch Cross feed: (24) 0.017 – 0.250 mm/rev metric; (24) 0.0007 – 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear wall - 4-way toolpost - Foot brake Nwodpfx Aevzmtzsfxsg - Emergency stop switch - Coolant system - Chip tray - Fixed centre - Change gear set - Reducing sleeve for main spindle - Machine feet - Operating tools - Operating manual

Būklė: naujas, Gamybos metai: 2024, Neue Maschine Umlaufdurchmesser über Bett: 500 mm Umlaufdurchmesser über Support: 270 mm Umlaufdurchmesser im Bettspalt: 700 mm Bettbreite: 340 mm Spitzenweite: 1.500 mm Spitzenhöhe: 250 mm Drehzahlbereich: 22 – 2.000 U/min Nwedpfxewu Du Is Afxsg Spindelaufnahme: Bajonett 6 Spindeldurchlass: 52 mm Inklusive: 3-Backenfutter, 4-Backenfutter, Schnellwechselstahlhalter mit 4 Einsätzen, Schnellvorschub, Kühlmitteleinrichtung, 2-Achsen-Digitalanzeige, feste Lünette, Mitlaufende Lünette, Wechselradsatz und Bedienungsanleitung

Būklė: naujas, Gamybos metai: 2026, CORMAK HBS260 band saw for cutting pipes, profiles, and bars is widely used in all metalworking shops where precision, quality, and cutting speed are essential. The model features a swiveling arm adjustable from 0-60°. The design of the saw bow ensures accurate and quiet operation. It comes with a removable chip tray for easy cleaning! Machine Features This horizontal metal band saw with a swiveling arm allows for cutting perpendicular or at any angle between 0 and 60° to the material axis. The workpiece can be fed manually or with any mechanical device, while the saw blade feed operates automatically. The blade guides are fitted with special carbide inserts and bearings, which greatly improve blade tracking, longevity, straightness, and the quality of the cut. Carbide blade guides significantly reduce wear on both the machine and the blade. The machine is equipped with a high-performance coolant pump with a closed-cycle cooling system. The saw’s arm is cast from a single piece of cast iron, and, combined with a 27 mm wide band saw blade, it is fully suitable for serial cutting of both profiles and solid materials. The vice is mounted on an adjustable bed with a quick-release clamp. Blade guides are equipped with carbide inserts and rolling bearing systems. It is the CARBIDE BLADE GUIDES that ensure cutting precision and straightness. The upper part of the base is shaped to form a tray for collecting coolant and chips generated during the cutting process. To the base, a sturdy cast iron work table with a swiveling arm is mounted, along with a control panel on a separate arm. During cutting, the main cutting motion is performed by the moving saw blade, while arm feed is via gravity. The speed of arm descent (cutting speed) is adjusted using a hydraulic cylinder. Feed rate is controlled from the saw’s control panel. There are two blade speeds to choose from: 35 and 70 m/min. In the lower end position of the arm (after cutting the material), the drive to the blade is automatically switched off. Safety is ensured by saw blade guards and microswitches that stop the motor after the cutting cycle or when any guard is opened. Additional protection consists of the automatic saw shut-off in the event of blade breakage. Band saw blade size [mm]: 2520 x 27 x 0.9 Blade tension: mechanical (manual) Blade speeds [m/min]: 35, 70 Arm descent adjustment: stepless – hydraulic cylinder Vice base height [mm]: 860 Saw wheel diameter [mm]: 300 Saw frame swivel [°]: 0-60 Power supply: 3-phase 400V Nwjdpfsudi Uzsx Afxeg Main motor power [kW]: 1.1/1.5 Coolant pump motor power [kW]: 0.05 Dimensions with base [cm]: 150x80x140 Weight [kg]: gross/net - 210 / 180 kg Additionally: - 2 pcs M42 saw blades - 5L Emulgol coolant - Magnetic chip collector ZW580

Būklė: naudotas, Sūkių skersmuo virš lovos: 460 mm Sūkių skersmuo virš atramos: 256 mm Sūkių ilgis: 1250 mm Tarpcentris atstumas: 1250 mm Centro aukštis: 230 mm Nsdpjxwp Ebefx Afxswg Veleno anga: 55 mm Veleno apsukos: 35 - 1800 aps./min Staklių svoris apie 2,7 t Staklių matmenys (I x P x A): 2,75 x 1,20 x 1,42 m Priedai: 3-žandų įvorė 250 mm ø, MULTIFIX galva su 3 įdėklais, fiksuota atrama

Būklė: naujas, tuščias svoris: 140 kg, didžiausias leistinas svoris: 610 kg, bendras svoris: 750 kg, ašių konfigūracija: 1 ašis, krovimo vietos ilgis: 2 304 mm, krovinių skyriaus plotis: 1 256 mm, krovos erdvės aukštis: 1 400 mm, padangos dydis: 155/70 R13, Gamybos metai: 2024, darbinė masė: 750 kg,

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, tuščias svoris: 169 kg, didžiausias leistinas svoris: 581 kg, bendras svoris: 750 kg, ašių konfigūracija: 1 ašis, krovimo vietos ilgis: 2 300 mm, krovinių skyriaus plotis: 1 550 mm, priekabos stabdys: priekaba be stabdžių, Gamybos metai: 2026,

Būklė: naujas, Gamybos metai: 2026, The CORMAK ZS-40B industrial geared pillar drill is a robust machine boasting significant potential. Equipped with a swiveling head with adjustable height, an automatic tapping device, and a precision handwheel, it delivers flexibility and accuracy in operation. The powerful motor ensures high drilling performance, while the solid construction and hardened oil-bath transmission gears guarantee stability and durability. Supplied with a set of tap holders, extending the capabilities of this professional tool. Additionally, the drill features power feed and integrated coolant system. Machine Features - Exceptional operational flexibility thanks to the swiveling, height-adjustable head - Integrated coolant system - Left/right rotation, automatic tapping device - Precision handwheel with depth scale - Hardened gears in the oil-bath gearbox - High stability and machining quality due to a solid base - Powerful motor ensuring excellent drilling performance - Rigid, thickened column with ground surface - Large rotary table with height adjustment - Vice-mounting capability Technical Data DRILLING CAPACITY (CAST IRON/STEEL): 40/32 mm Nwsdpsridv Sefx Afxjg TAPPING CAPACITY (CAST IRON/STEEL): M32/M24 COLUMN DIAMETER: 115 mm SPINDLE TO COLUMN DISTANCE: 260 mm MAX. SPINDLE END TO WORKTABLE DISTANCE: 754 mm MAX. SPINDLE END TO BASE DISTANCE: 1270 mm SPINDLE TAPER: MT4 SPINDLE SPEED RANGE: 50 - 2520 rpm NUMBER OF SPEEDS: 6 FEED RATES: 0.12; 0.18; 0.25 mm/rev WORKTABLE DIMENSIONS: 354x575 mm TOTAL HEIGHT: 2120 mm MOTOR POWER: 1.5 kW POWER SUPPLY: 400 V/50 Hz WEIGHT: 350 kg

Būklė: naujas, tuščias svoris: 270 kg, didžiausias leistinas svoris: 480 kg, bendras svoris: 750 kg, krovimo vietos ilgis: 2 400 mm, krovinių skyriaus plotis: 1 260 mm, krovos erdvės aukštis: 100 mm, padangos dydis: 165/70R13,