Pjūklų griovelio staklės

Uniforest Titan 40/20 Premium

Sąlyga: naujas, High-Performance Firewood Processor with 20 Ton Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro firewood processor is the ideal solution for quickly and effortlessly processing logs up to 48 cm in diameter into premium firewood. This processor stands out due to its well-thought-out yet simple construction, which not only requires minimal maintenance but also simplifies repairs. This impressive machine can be equipped with your choice of a powerful 14 HP Kohler petrol engine, a 9.5 kW 400V electric motor, or PTO drive for three-point linkage attachment. The SA48 Pro operates entirely mechanically, dispensing with electronic controls and instead using components such as hydraulic valves with levers. Specifications: - Maximum cut length: 55 cm - Maximum diameter: 48 cm - Splitting force: 20 tons Knjdpjpz I Ncjfx Ag Ajd - 55 cm bar - Extra-wide 3.2 m conveyor belt - Hydraulic feed up to the chainsaw - Swivelling conveyor belt - Automatic chain lubrication Despite its high splitting power and large diameter capacity, the firewood processor remains relatively compact. Equipped with a tow bar, it can be attached to any trailer hitch for easy transportation. Additionally, two people can easily move the firewood processor by hand on level ground – a towing vehicle is not always required. The log length can be continuously adjusted up to 55 cm. The splitting wedge can be repositioned up or down using a hand lever, allowing you to split logs in 2, 4, or even 6 pieces depending on wood thickness. Optional accessories, such as the log lifter or chain conveyor, further facilitate operation. Multiple logs can be loaded onto the chain conveyor with a forklift, crane, or front loader, eliminating the need to lift individual logs by hand. The SA27 Pro has been replaced by the improved SA48 Pro. Pricing: Brugger SA48 Pro firewood processor: €9,749 6-way splitting wedge: €199 8-way splitting wedge: €299 Additional PTO drive (for electric or petrol versions): €949 Log lifter: €1,498 Chain conveyor: €1,898

Sąlyga: naujas, Gamybos metai: 2025, Motor: 7.5 kW, 50 Hz, 380 V, 3-phase Splitting force: 20 tonnes Automatic saw: yes Maximum log diameter: 38 cm Maximum log length: 61 cm Knsdpfsv Dvhyjx Ag Aed Feeding length: 1.8 m Chainsaw/split drive: hydraulic, max. 4800 rpm Saw and feed control: hydraulic Conveyor belt with winch: 3.2 m length / 250 mm width Conveyor belt angle: ±15° (manually adjustable) Conveyor belt speed: 0.8 m/s Chainsaw: 22" Cylinder diameter: 4" Conveyor belt length: 3.2 m Cycle time: 6 seconds 12" trailer wheel 4-way splitting wedge Hydraulic oil capacity: 32 L Weight: 737 kg The machine is mounted on a chassis with a ball hitch coupling. The log splitter is equipped with a 3.2 m long conveyor belt that can transport the processed wood directly onto a trailer. The maximum feeding height for the wood via the conveyor belt is 2 m. The machine has a capacity of approx. 5–8 cubic metres of wood per hour, depending on the type of wood. Various optional accessories are available for the machine, such as a hydraulic log infeed and splitting wedges.

Sąlyga: naujas, Automatinis pjovimo ir skaldymo įrenginys TITAN 43/20 CD+E su valdymu per valdymo svirtį pjauna rąstus, kurių maksimalus skersmuo ø 43 cm, harvesterio pjūklo juosta ir skaldo juos su 20 tonų skaldymo jėga. Tai kombinuotas įrenginys (elektros ir PTO prijungimas). Pristatymas ir apžiūra galimi pagal išankstinį susitarimą – įrenginys šiuo metu sandėlyje, iš karto prieinamas. Sandėlio išpardavimas – speciali kaina – tarp pardavimo teisė išlieka. Kodpfx Astrmg Hjg Aond

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Hainbuch centroteX quick-change system (year: 2019) • 2x centroteX M machine adapters (A037017.0382B): o Short taper size: KK8 o Draw tube connection: M85x2 o Length: 53 mm o Through-hole: 78 mm • 1x TOPlus mini Axfix Gr.65 (A038531.0015C) o ID no.: 10000678 o Length: 136 mm • 1x TOPlus mini Axzug Gr.65 (A038530.008C) o ID no.: 10000676 o Length: 134.5 mm • 1x Hainbuch (HWR) InoFlex VT026 – 4-jaw chuck o Length: 179 mm o Diameter: 210 mm • 1x Forkardt 3-jaw chuck (3QLC 250-72 Z8-S12) o Length: approx. 155 mm o Diameter: 257 mm • 1x monteq quick-change system (A012708.0009B) • 1x D400 roll container o Storage for 4 clamping devices listed above o monteq quick-change system + Tiger crane hook mounted on the side • Documentation/instructions • 1x tool box with accessories Accessories • TOP65 clamping head (for raw material) o 1 pc each: d12, 20, 30, 36, 40, 50, 55, 60, 65 • TOP65 clamping head (hexagon) o 1 pc each: SW36, 45, 46, 50 • TOP65G clamping head (smooth) o 1 pc each: d8, 10, 12, 14, 15, 16, 17, 18, 20, 22, 23, 24, 25, 26, 27, 28, 30, 32, 33, 34, 35, 36, 39, 40, 42, 44, 45, 46, 50, 54, 56, 60, 62, 64, 65 o 2 pcs: d38 • 1x extraction ring for clamping head 65 • Total of 50 clamping heads • Jaw accessories o For HWR 4-jaw chuck:  1 set of reversible jaws  3 sets of claw jaws o For Forkardt 3-jaw chuck:  1 set of hard reversible jaws o Various T-nuts + bolts Kjdpjv Ivakofx Ag Aond o Various distance bolts for jaws (to adjust clamping length) • Various soft jaws (2 pallets)

Sąlyga: naujas, Gamybos metai: 2024, 15 kW motor Splitting force: 30 tonnes Automatic saw: yes Maximum log diameter: 500 mm Maximum log length: 500 mm Hydraulic feed (L x W): 1800 x 390 mm Max. splitting lift height: 230 mm (hydraulic) Saw and feed control: hydraulic Joystick control Discharge conveyor with winch: 3.5 m length / 300 mm width Chainsaw: 24" Saw speed: 10,000 rpm Cylinder diameter: 4.5" Cycle time: 6 seconds 6-way splitting wedge Oil flow: 50 l/min Hydraulic oil capacity: 40 L Kjdev Dvkzspfx Ag Aend 50 mm ball coupling Tyres: 22x11-10 ATV Weight: 1000 kg The machine is mounted on a chassis with ball coupling. The processor is equipped with a 3.5 m long conveyor belt, which can transport the processed wood directly to a trailer. The capacity of the machine is approx. 5–8 cubic metres of wood per hour, depending on the type of wood. Various optional accessories are available for the machine, such as hydraulic log feed and wedges.

Sąlyga: naujas, Gamybos metai: 2024, The machine has an electrical connection of 15 kW and can handle log diameters up to 85 cm. The saw motor is electrically powered and has an 11 kW motor. Kodpfsu Sklmsx Ag Aend

Sąlyga: naujas, Gamybos metai: 2024, Motoras 7,5 kW, 50 Hz, 380 V, 3 fazės Skėlimo slėgis 20 tonų Automatinis pjūklas: taip Maksimalus rąsto skersmuo 48 cm Maksimalus medžio ilgis 61 cm Padavimo ilgis 1,8 m Grandininio pjūklo / skėlimo pavara: hidraulinė, maks. 4800 aps./min. Pjūvio ir padavimo valdymas: hidraulinis Konvejerio juosta su gervėle, ilgis 3,2 m / plotis 250 mm Konvejerio nuolydžio kampas ±15° (rankiniu būdu reguliuojamas) Konvejerio juostos greitis 0,8 m/s Grandininis pjūklas 22'' Cilindro skersmuo 4'' Konvejerio juostos ilgis 3,2 m Ciklo laikas 6 s 12'' priekabos ratas 6 svirčių skėlimo pleištas Kjdpfxjv Dvfro Ag Aend Hidraulinės alyvos talpa 32 l Svoris 737 kg Įrenginys sumontuotas ant važiuoklės su rutuline prikabinimo jungtimi. Skaidymo-pjovimo mašina turi 3,2 m ilgio juostinį konvejerį, kuris gali tiesiogiai transportuoti apdirbtą medieną į priekabą. Maksimalus medienos padavimo aukštis per konvejerio juostą – 2 m. Mašinos našumas siekia apie 5–8 kubinius metrus medienos per valandą. Priklauso nuo medienos rūšies. Mašinai gali būti naudojami įvairūs papildomi priedai, pavyzdžiui, hidraulinis rąstų padavimas ir pleištai.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 6 000 mm, pjovimo plotis (maks.): 1 050 mm, VERSATILE HORIZONTAL SAWMILL, DOUBLE CUT / WRC 1050 "VENEER" VERSION AUTOMATIC AND SPECIFIC CUTTING OF THIN VENEER LAMELLAE • Chassis length: 11M for 6.5M log length, extensions available • DOUBLE-CUT SAW HEAD with adjustable, movable pressure guides for holding the blade during cutting • SEPARATE OPERATOR STATION & CONTROL SYSTEM from the saw bench – to be positioned as per layout plan – at the existing site, open station with or without a seat, integrated with control system • MAIN MOTOR 45KW WITH frequency inverter option • WORM SCREWS in each side pillar / 2 worm screws in total / with or without frequency inverter, for faster and more precise vertical movement • MORE POWERFUL HYDRAULIC GENERATOR ON THE CHASSIS: 18KW + 200L TANK + FREQUENCY INVERTER – so that the hydraulic equipment on the chassis moves faster • FastSmartCut CONTROL SYSTEM, SCHNEIDER 4.0 base, / WRAVOR PROGRAM / 2 joysticks + touchscreen, quoted instead of the initial standard PLC 1040 system • Automatic push-off arms for sawn timber– including the GUILLOTINE OPTION which is quoted: vertical arm for difficult timber, ensuring greater SPEED • 1 CAMERA – 1 display, additional cameras optional • HYDROPHORE COOLING SYSTEM • LUBRICATION SYSTEM – in ELECTRIC version or mechanical pump • 5 pairs of HYDRAULIC DOGS, including option with hydraulic cylinder • 5 HYDRAULIC ROLLERS, up/down movement • 3 NEW GENERATION LOG ALIGNERS (not at 90° angle) • 3 NEW GENERATION LOG TURNERS, V-shaped cradle system • ELECTRICAL CABLING: flat cables, routed in cable trays • SILON BELT outfeed conveyor, 4M, automatic up/down movement controlled from the command system • SAWDUST EXTRACTION SYSTEM by ZIPPER: suction (vacuum mounted on frame) as close as possible to the saw blade, with option for connection to existing EBT extraction system: completes the more powerful VENEER system compared to standard • CABLE-DRIVEN SAW HEAD TRACTION, SEW asynchronous system for increased speed and precision: optional Kodpfx Agjvtqtvj Aond Differences between the standard horizontal saw bench and the specific veneer saw bench: the saw is equipped with the following adaptations: - reinforced guards around the saw head to prevent sawdust intrusion between the flywheel and the blade - additional protective shields due to more powerful and higher volume sawdust extraction - double-cut blade - graphite blade guides (bakelite on the standard model) - special system for changing graphite blade guides - special protection for chassis and sensors; plexiglass in the head cover (differently designed saw head cover compared to standard bandsaw) - additional sensors for blade deviation - full-length pneumatic jet cleaning for the saw bench Additional options available on request.

Sąlyga: labai geros būklės (naudotas), 595 x 395 mm Clamping pressure -70 bar Kodoiz A E Espfx Ag Aend MARCELS MASCHINEN AG

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 680 kg, bendras aukštis: 910 mm, bendras ilgis: 1 200 mm, bendras plotis: 750 mm, stalo aukštis: 910 mm, stalo plotis: 75 mm, bendras svoris: 195 kg, stalo apkrova: 680 kg, stalo ilgis: 1 200 mm, darbinio aukščio: 910 mm, The Rhino Cart® mobile clamping station is a turnkey system for fixturing and clamping during welding and fabrication. Clamp and fixture at any point on the reversible, precision-ground, nitrided (heat-treated) tabletop measuring 1200 x 750 mm, ensuring accuracy for all your setups. Be ready for any job with the Rhino Cart® package, including: the Rhino Cart® welding table + fixturing kit. Welding table (TDQ612075) + 66 pcs. + Fixturing kit (TDK6100). Fast clamping and fixturing at any point on the surface. Precise stock positioning for every new project. Reversible tabletop is resistant to spatter and rust. Lockable castors and leveling feet allow for mobile or stationary use. Rhino shelves, racks, and pegboard keep your fixturing tools organized and within reach! Knjdpfetizfaex Ag Asd Price excluding VAT and shipping: €1950 Price including VAT, excluding shipping: €2359.50