1996 Uniconfort CMT/F 45 karštas vanduo generatorius, kūrenamas pjuvenomis / malkomis

Uniconfort CMT/F 45

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Ijdou Agh Sepfx Ab Noti Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, 1 used rapid steam generator ----- Manufacturer: CERTUSS Isdjwra S Ropfx Ab Nsti Model: Junior Capacity: 600 kg/h Max. thermal output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas train, control cabinet (mounted on the boiler body), feed water pump, as well as the existing coarse and fine fittings.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1981, WEINIG Hydromat H25R, S/N 2603-624, pagaminta 1981 m., su praeinama garso izoliacijos kabina KASCHWIG – beveik nauja, pagaminta 2017 m. • Trumpas įleidimo stalas su sunkiu 6 volelių įleidimu 1. apatinis velenas 11,0 kW 2. dešinysis velenas 11,0 kW 3. kairysis velenas 11,0 kW 4. viršutinis velenas 15,0 kW Itjdpotkt Tpjfx Ab Nsi 5. apatinis velenas 11,0 kW 6. apatinis velenas 11,0 kW • Hidraulinė padavimo sistema 6-60 m/min. • Padavimo variklis 22,0 kW • 4 pavaromis varomi stalo volai • Veleno skersmuo 50 mm • Automatinis stalo tepimas • 1, 4, 5 ir 6 velenai su atraminiais guoliais • 1 ir 4 velenai su tiesia griovimo funkcija • Padavimo volai 170 mm • 4 vnt. hidroobliavimo galvų 150 mm • 6 vnt. hidroobliavimo galvų 250 mm • Ištraukimo jungtis virš mašinos

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Džiovinimo sistema – 1T 184 TPR modelis (mobilus su konvejeriu) Siūlome aukštos kokybės džiovinimo sistemą, idealiai tinkančią medžio pjuvenoms, derliui, perdirbimui tinkamoms atliekoms ir maisto pramonei skirtų žaliavų džiovinimui. Džiovintuvas yra visiškai naujas, originalioje pakuotėje. Ijdpjua D U Isfx Ab Neti

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115kW) Charge air and water cooler Electronic direct injection / Common Rail Advanced idle automation with engine shutoff function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring operated with closing assistance Automatic central lubrication system, grease reservoir fillable from ground level Rear-view camera Side camera LED light package equipment LED light package for cabin Dozer blade on oscillating axle side, 3m wide, with integrated cylinder protection Travel direction detection and steering direction inversion Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit braking system Power-shift transmission Twin air tires, without spacer rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grille for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side, rear window) Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper and washer system (front window) Low-frequency suspension comfort driver's seat including seat heating and seat ventilation with oscillating armrests / joysticks Joystick steering Automatic climate control Isdpfxeyh A Iij Ab Njti Multifunction display Document clip Reach at stick pin 13m at grab tip 10.7m Close-range extension for loading stick Level monitoring for coolant and hydraulic oil Filtration system for attachments Load-holding valves lift cylinder Load-holding valves stick cylinder Overload warning device Basic Quick-release coupling on loading stick Wood grabbers available on request: 1 or 1.25m³

Būklė: labai geros būklės (naudotas), Keturių pusių obliavimo staklės Weinig Hydromat 23C Darbinis plotis: 230 mm Darbinis aukštis: 160 mm Velenų kiekis: 7 Velenų išdėstymas: 1. Apačia 15 kW 2. Dešinė 7,5 kW 3. Kairė 7,5 kW 4. Viršus 15 kW 5. Apačia 30 kW (daugiažiaunė) 6. Apačia 7,5 kW (hidro atrama) 7. Viršus 7,5 kW (hidro atrama) Velenų apsukų skaičius: 6000 aps./min. Veleno skersmuo: 50 mm 4 traukimo voleliai darbiniame stale Padavimo greitis reguliuojamas dažnio keitikliu iki 36 m/min Padavimas varomas kardaniniu velenu Iodoxlcufepfx Ab Nsti Pneumatiniai prispaudžiantys voleliai Techninė dokumentacija

Būklė: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Produktionslinie eines kanadischen Herstellers, Brunette, die sich durch hohe Leistungsfähigkeit und Langlebigkeit auszeichnet. Itodpfxjvu D Dwo Ab Nji Das Angebot umfasst eine Entrindungsmaschine für Rundholz mit Zufuhrtischen, Rindensammel-Förderern sowie einen Hacker mit einer installierten Leistung von 630 kW und einem Doppelschnecken-Austragsförderer.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Pasiūloje yra trys vienodi Certuss garų generatoriai. Pagaminimo metai: 2008/2009/2010, garų našumas: 600 kg/h, slėginio indo tūris: 42,9 l, nustatytas slėgis: 10 bar, bandymo slėgis: 57 bar. Įrenginio matmenys (I/P/A): 1650 mm/900 mm/2000 mm, svoris: apie 950 kg. Yra dokumentacija. Galima apžiūra vietoje. Itjdpfxeyw Svre Ab Noi

Būklė: naudotas, Gamybos metai: 2022, Pjovimo aukštis: 260 mm Pjūklo variklis: 7,5 kW Pjūklo disko skersmuo: 500 mm Padavimas maks.: 250 m/min Optimizuojantis skersavimo pjūklas Weinig OptiCut 260 automatiškam medienos kapojimui pagal defektus (fluorescencinė kreida) bei ilgius. Itjdjx Ditfspfx Ab Nsi Atskira matavimo stotis fiksuoja ilgius ir pažymėtas ruošas: konvejerio ilgis 7,5 m Įeinantis storis: 12 – 80 mm Įeinantis ilgis: 400–6300 mm Žymėjimo stotis: 5.000 mm Valdymas: OptiCom Pro Ciklas: apie 1 sek.

Būklė: beveik kaip naujas (naudotas), Edelstahl-Lagertank 5.000 Liter Abmessungen: (Durchmesser) 1.850 mm x (Höhe) 2.200 mm Iedpfehridcex Ab Neti Lagerkapazität: 5.000 Liter Material: Edelstahl 304 (V2A)