Namelių statybos mašina rąstiniams namams

Unbekannt TS 240

Būklė: geras (naudotas), Gamybos metai: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - Injection unit control. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with 135 mm screw diameter, shut-off valve, and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Opening force: 560 kN - Platen dimensions (H x V): 1,600 x 1,600 mm - Tie bar spacing (H x V): 1,140 x 1,140 mm - Maximum opening stroke: 1,600 mm - Mould height (min-max): 500 - 1,100 mm - Daylight: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Injection weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Rated motor power: 132 kW - Dry cycle time per Euromap 6: 965 cycles/h - Oil tank capacity: 2,440 l Weight and dimensions Iaodpfx Abstrya Revst - Net weight with control cabinet: 49 t - Footprint dimensions (L x W x H): 11.72 x 2.92 x 2.71 m.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, A complete 5-layer co-extrusion blown film line with 5 extruders and all peripheral equipment is available. Overall system dimensions (L/W/H): 14m/22m/11m. Blown film die head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm–2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melt output: 500kg/h, total power requirement: approx. 300kW. 1) Double turret winder Wintech, winding width: 2000mm, film thickness range: 35µm–150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6 inches. 2) Kiefel Worms 70.29D extruder, power: 89kW, 5-zone barrier screw, speed: 125rpm, overhauled: 2010. Iaedov T An Sopfx Abvst 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, 3-zone barrier screw, speed: 200rpm. 4) Central extruder Kiefel Worms 50.25D, power: 34kW, 3-zone core progressive screw, speed: 175rpm. 5) Adhesive extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, 3-zone barrier screw, speed: 200rpm. 6) Outer layer extruder Kiefel Worms 80.25D, power: 125kW, 5-zone barrier screw, speed: 150rpm. 7) Film calibration device Reinhold SRK 200/9.6. The entire line is controlled by a Plast Control system. Additional components: integrated width measurement, C-scan for profile measurement, web guiding system, corona pre-treatment, film take-off. Includes a spare 5-layer die head FSBK with IBC, spare rollers, ring gap blower with filter, extraction units, crane, and external system terminal. Documentation available. On-site inspection possible.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Galimas Cremona džiovintuvas. Sekcijų skaičius: 6, temperatūros zonos: 2, vėsinimo sekcija: 1, plotis: 4200 mm. Gamybinis našumas: apie 80 lapų/min. Dokumentacija yra. Galima apžiūrėti vietoje. Iasdpfsw I E Dpox Abvet

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2004, automatic fan press after complete overhaul automatic Iaedpfxelnanwo Abvet

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Log House Milling Machine BL100A, fully overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, and processing length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Log house milling machine BL100A – four-spindle milling unit with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-sections approx. 140x220mm • HM reversible insert tools included for wall thickness approx. 40–100mm • End groove milling unit 3.0kW with cutter B = 21–40mm • Drilling device with drill guide and drill bit D = 20mm • Integrated under-table cross-cut saw 4.0kW, saw blade D = 500mm • Pneumatic workpiece clamping with horizontal clamping jaws • Outfeed table 9m with push-off device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO Control Software • Label printer for component identification, laser printer for printing production lists • Excellent condition, factory-refurbished & general serviced, with parts warranty, in ready-to-operate condition Isdpfxexxhwlj Abvjat • Price & delivery time upon request. Subject to prior sale and all rights reserved

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, veikimo valandos: 200 h, Funkcionalumas: visiškai funkcionalus, varžto skersmuo: 65 mm, bendras svoris: 9 000 kg, spaudimo jėga: 785 kN, bendras plotis: 1 800 mm, bendras ilgis: 4 500 mm, bendras aukštis: 3 000 mm, galia: 0,045 kW (0,06 AG), Oferujemy na sprzedaż lekko używaną wtryskarko-rozdmuchiwarkę w doskonałym stanie technicznym. Maszyna jest podłączona i w pełni sprawna – umożliwia prezentację podczas pracy. Dodatkowo możemy zaoferować kilka gotowych form do produkcji kanistrów oraz kloszy lamp. Urządzenie przystosowane jest do pracy z granulatami PMMA, PC, PP oraz PE. Iajdpfx Aothk Rzsbvst

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Dvi mašinos viename, pagaminta geriausio Šveicarijos CNC gamintojo. 1. Rąstų frezavimas, 2. Medinių karkasų gamyba. Ši mašina 6 metus gamino aukštos kokybės ir preciziškumo apdirbtus rąstinius statinius reikliems užsakovams (pastaruoju metu nenaudota). Skirta pažangiems statytojams, norintiems automatizuoti iki 8" x 12" dydžio tašytų rąstų konstrukcijų gamybos procesą arba naudoti tik karkasų gamybai. Puikiai tinka JAV ar Kanados klientams dėl patogaus transportavimo sunkvežimiu. Pristatymas, sumontavimas, kalibravimas, apmokymai – pagal sąnaudas. Isdpfx Aowvwl Aebveat Savitakis sprendimas - Kompaktiška konstrukcija – vos 10 pėdų gylio, 8 pėdų pločio. - Visi procesai atliekami viduje, uždaroje erdvėje. - Nuopjovos patenka ir pašalinamos į centrinę surinkimo duobę. - Medžio drožlės pašalinamos oro ištraukimu – darbo zona išlieka švari. - Veikia itin tyliai – šalia galima kalbėtis net veikiančiai mašinai.

Būklė: naujas, Gamybos metai: 2025, garantijos trukmė: 12 mėnesiai, pjovimo aukštis (maks.): 120 mm, pjovimo plotis (maks.): 200 mm, galia: 16 kW (21,75 AG), Įranga: sūkių greitis be galo kintamas, Machine for machining components used in modern log house construction, offering an excellent price-performance ratio for entry-level users, small production runs, or as an additional solution for special components. Components are loaded and positioned manually. Once the processing unit is activated via the two-hand control buttons, the milling operation runs automatically. Optional roller tables and positioning stops are available for precise positioning of the components. Isdpswnt Htsfx Abvsat

Būklė: labai geros būklės (naudotas), Gamybos metai: 1982, bendras aukštis: 5 600 mm, spaudimo jėga: 400 t, oro slėgis: 6 juosta, atstumas tarp šoninių atramų: 650 mm, atstumas tarp stulpų: 1 600 mm, eigos ilgis: 280 mm, stalo ilgis: 1 600 mm, stalo plotis: 1 120 mm, Abstreckpresse im funktionsfähigen Zustand: Nennkraft: 400 t Hub: 280 mm Hubzahl: 36 1/min Tischgröße: 1.600 x 1.120 mm Stößelgröße: 1.435 x 960 mm Ijdpjubyrxefx Abvsat Hauptantriebsmotor: 37 kW Gesamtmaße: - Länge: 3.010 mm - Breite: 2.135 mm - Höhe: 5.600 mm Gesamtgewicht: 50.000 kg.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, I am selling an automatic CNC machining center for BLOCK-HOUSE production, Hundegger K2i, year of manufacture 2011. Almost like new. Year of construction 2015. Undertable rotary saw with saw blade diameter from 750 mm to 800 mm, 360° rotation, servo-hydraulic tilt from 0–65°. Universal 5-axis unit with disc cutter, end mill, and end milling head, milling head diameter 350 mm x 100 mm shank cutter. Combination tool holder for at least 5 tools with horizontal boring device, power up to 2.5–3.0 kW, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum machining depth 300 mm. Positioning and clamping of the workpiece via gripper arms. While the workpiece is measured and transported to the desired position, the gripper arms hold and stabilize the workpiece as close as possible to the tool. The processed material can be rotated automatically. Tolerance +/- 2 mm for a length of 13 m Fully automatic wood infeed with feed roller conveyor and feed as well as sliding cross conveyor. Iedpfx Abjxtxkxsvsat K2i: Undertable tilt crosscut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Combination support device for vertically operating tools K2i: Drilling device (2.2 kW) – vertical drilling direction K2i: Combination support device for horizontally operating tools K2i: Drilling device (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or user side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic connection K2i: Roller conveyor for removing wooden elements with pusher K2i: 5-arm storage table K2i: Safety device K2i: High-quality machine surface K2i: Extension of the K2i frame to 13.56 m K2i: 5-axis universal milling unit – UF5 (upgrade to 4 axes) K2i: Remote maintenance (incl. portable video camera) K2i: Dovetail milling machine (with rotating blades) 60x28x16.5 Ideal for timber construction! Available immediately.