Ritininis konvejeris, gravitacinė juosta, sklendės praėjimas...

Unbekannt

Sąlyga: naudotas, Gamybos metai: 1999, 3x 20-foot containers Roof in good condition Bdodpfxouu Ta Rs Admjk Disassembled

Sąlyga: naujas, Gamybos metai: 2025, RLA 400 VIBER Performance 11,300 m³ Capacity approx. 11,300 m³/h Motor power 11 kW / 15 HP Speed 3,000 rpm Extraction velocity 32 m/s Extraction nozzle diameter 355 mm Filter material: polyester Filter permeability: 5 micron Filter size: 160 x 935 mm Number of filters: 58 Chip container size: 500 x 500 x 600 mm – 3 units Voltage: 380V Dimensions: 1000 x 3000 x 2300 mm Weight: 630 kg Sound level: 85 dB unconnected / 70 dB connected Bsdpfxelkd Tfs Admjdk + 850 euros for models with fire extinguisher (Safe System) + 1350 euros for models with inverter (speed control)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1993, max. Edge thickness: 0.2 – 15 mm Feed speed: 12 / 18 m/min Heating-up time: approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Granulate quick-heating tank Guillotine: 0.2 – 3.0 mm Flush trimming unit Radius trimming unit Bedpfx Adofbr S Romedk Operation via selector switch / push buttons Extendable roller support Soundproof enclosure Machine length: 3,800 mm Note on used machines: - Errors in technical specifications and prior sale excepted. - Listed prices are ex location – loaded free of charge! - The machines have been cleaned and function-tested. - All machines are sold as inspected, without any claim to warranty. Buyers are free to inspect the machines at the site. - Special agreements are only valid in written form. (We only respond to inquiries specifying your address and phone number!)

Sąlyga: naujas, Gamybos metai: 2025, Parts Cleaning Machine, Spray Cleaning System Type L800FP Fully automatic hot water parts washing machine with basket drive powered by gear motor, housing made of stainless steel 1.4301, piping and rotary basket galvanized steel, special nozzle system with stainless steel flat jet nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control for dry-run protection, Bdodjhl H Ubjpfx Admek - Basket diameter: 780 mm - Effective height: 500 mm - Max. load capacity: 150 kg - Spray pressure: 3 bar - Tank volume: 120 liters - Heating: electrically adjustable (room temperature up to 60°C) System dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm Suction filter for pump protection Delivery: ex works, FCA

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, This degreasing system operates under vacuum (pressure swing process) using modified alcohol or hydrocarbon solvents. (New equipment) 12-month warranty Immediately available from St. Gallen Features vacuum-pressure swing technology Process steps: spray, immersion, ultrasonic, and vapor degreasing, including vacuum drying. Specifications: Ultrasonic: 2 x 1000 W – 25 kHz Double fine filter Chamber door made of armored glass 2-tank system, total capacity 400 L Double distillation with residual distillation Automatic oil discharge 3-stage water separation Electropolished chamber for ultra-fine cleaning Screw-type vacuum pump (latest generation) Loading trolley Bdedpfx Asqy H H Djdmok 2 washing baskets, mesh width 7 mm and 12 mm 12" touch panel interface Prepared for automatic loading Maximum basket dimensions (480 x 320 x 200 h mm) Maximum load capacity: 100 kg System dimensions: 2400 x 2400 x 3300 h mm System weight (basic configuration): 2500 kg Color scheme: RAL 9003 (white) RAL 7021 (black)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, We offer you the following: Deburring Machine Manufacturer: Viet Model: SV3-4.3 RVXR Year of manufacture: 2020 Technical Data and Features: - Abrasive belt change on the left side of the machine - Tool kit - Digital thickness display - Material at the infeed too strong - Electro-pneumatic control of oscillation - Air filter with condensate separator and automatic drain - Maintenance-free pneumatic system - Pneumatic lifting and lowering of units when switching aggregates on or off - Machine with head adjustment (fixed working height 900 mm) - Lifting system on 4 columns (spindle) with chain drive - Table extension at front and rear, each with 1 roller - Industry 4.0 (LAN) package with network LAN connection - Working width: 1350 mm - Machine with movable head - Centesimal stroke system with inverter - Usable working height 160 mm - LED lighting inside the machine - Electronic belt control for longitudinal units - Calibration sanding unit with sanding roller, diameter 190 mm, belt length 2620 mm - Electromechanical grit setting - The frequency converter allows adjustment of the sanding belt speed - V-Spin unit with 15-disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row and moving counter-rotating to each other. By combining these two movements, the V-Spin unit is suitable for rounding sharp edges and removing slag or oxides. - 16 backing pads for V-Spin units, diameter 80 mm, Scotchbrite + abrasives, grit size 80 - 16 backing pads for V-Spin units, diameter 80 mm, Tampico + grit size 80 - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads, each head containing 3 pads of rotating sanding brushes, diameter 123 mm. - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP), speed 0.5-7 m/min Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 Shore, smooth surface Bedpfxev Hxrgj Admjdk - Belt cleaning blower for conveyor carpet, incl. vacuum extraction - IPC MONITOR 15" touch-screen control for operating the machine, up to max. 10 processing units. The control manages the following processes: - Start sequence of the selected drive motors - Storage of up to 1000 processing programs - Automatic positioning of the working thickness regulator - Acoustic and visual signal when machine operation starts - Operating hours counter - Automatic control of feed speed depending on processing performance (expressed in sqm). This enables, based on statistic data, a longer service life of the sanding belt. The machine is in very good condition and comes with 2 Euro pallets of new sanding belts. Accessories, tools and clamping devices shown are only included in the scope of delivery if mentioned in the additional information. Technical specifications and details may be subject to change and errors. Subject to prior sale!

Sąlyga: naujas, Gamybos metai: 2025, Parts Cleaning Machine, Spray Cleaning System Type L800FP Fully automatic hot water parts washing machine with basket drive powered by gear motor, housing made of stainless steel 1.4301, piping and rotary basket galvanized steel, special nozzle system with stainless steel flat jet nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control for dry-run protection, - Basket diameter: 780 mm - Effective height: 500 mm - Max. load capacity: 150 kg - Spray pressure: 3 bar - Tank volume: 120 liters - Heating: electrically adjustable (room temperature up to 60°C) System dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm Bsdpfxsuxuv As Admjdk Suction filter for pump protection Delivery: ex works, FCA

Sąlyga: paruoštas naudoti (naudotas), Parduodamas juostinis transporteris, matomas nuotraukose, ilgis 6 m. Juostos plotis 0,65 m (nauja juosta). Bsdpfx Aer Nvx Uodmsdk Galimas transportavimas.

Sąlyga: naudotas, Gamybos metai: 1987, Pressure 160 t Bending length 4000 mm Distance between uprights 3060 mm Control FORTRON CNC 10 H 4 Throat depth 280 mm Stroke 250 mm Installation height 500 mm Table length 4050 mm Table width 280 mm Downward speed from 70 mm/sec Upward speed 68.4 mm/sec Working speed 9 / 3.5 mm/sec Max. operating pressure 205 bar Oil capacity 400 l Total power requirement 19.5 kW Machine weight approx. 20.8 t Bdodpfxotqqr Ro Admek Total weight incl. accessories 22 t Machine dimensions L x W x H 4.8 x 1.88 x 2.93 m Control cabinet dimensions 1.6 x 0.5 x 2.25 m - 3-axis machine - With crowning - With graphics Accessories: programmable backgauge, upper and lower tooling, table extensions

Sąlyga: naujas, • Arbeitsbereich 3300 mm X, 200 mm Y, 180 mm Z • 1 x vertikale Elektrospindel 7 kW mit Säge • 1 x vertikale Elektrospindel 7 kW, 12–18.000 U/min • 1 x Elektrospindel 1,7 kW mit Punkt-zu-Punkt-Bohraggregat (vertikal/horizontal) • 1 x horizontale Elektrospindel 5,6 kW, 12–18.000 U/min • 4+4 Werkstückauflagen, verfahrbar auf der X-Achse, jeweils ausgestattet mit verstellbaren pneumatischen Werkstückspannern • Linke und rechte, einziehbare Werkstück-Referenzanschläge • Separater Schaltschrank mit Handbediengerät zur Maschineneinrichtung • Einfache parametrische Programmierung mit 3D-Bearbeitungsmodellen Bodon Nv S Topfx Admsdk • Umfassende Sicherheitseinhausung mit Fronttüren, vertikale Öffnung, synchronisiert mit dem Maschinenzyklus