Konvejerio juosta 51 m/min

unbekannt 6630 x 340 mm

Gamybos metai: 2022, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Lauber wood dryer with longitudinal ventilation Chamber with stacking trolley Net volume 7.2 m³ with wood temperature measuring point -> new / unused / original packaging -> immediately available (standard delivery time approx. 9 months) Lsdpemidtrjfx Abksak -> see detailed description in the photos -> collection, loading, etc. to be arranged by the buyer -> transport, customs clearance, and insurance to be arranged by the buyer

Gamybos metai: 2023, Sąlyga: naujas, Maximum chipping height: mm 200 Lajdpfsncd Azsx Abksk Feed width: mm 500 Feed rollers: pcs. 3 Rotor diameter: mm 600 Chipping length approx.: mm 20–30 Output capacity: 16–20 rm/h wood chips Chipping knives: pcs. 2 Feed motors: kW 2x2.2 Net weight approx.: kg 4100 Feed: horizontal Machine frame: steel, shielded gas welded Rotor: steel, shielded gas welded, dynamically balanced Bearing: Oversized roller bearings Bearing housing: steel flange housings Feed rollers: steel, specially toothed Chip discharge: below the machine Screen: (sieve) for re-shredding overlength material Drive pulley: matched to main motor N=1500 min-1 Hydraulic system: consisting of hydraulic pump, membrane accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, DROZDOWSKI PRP 58 FRAME SAW with accessories: - Chain cross-feed conveyor - Chain longitudinal feed conveyor - Hydraulic system - Roller outfeed - Saw blade sharpener - Saw set tool The machine has undergone a complete overhaul at the manufacturer’s factory – excellent condition. Technical specifications: Horizontal clearance of the saw frame: 580 mm Vertical clearance between rollers: 350 mm Saw frame stroke: 300 mm Main shaft speed: 330 rpm Feed rate: 0.5 – 2.5 m/min Saw blade dimensions (length x width x thickness): 815 x 70 x 1.6 mm Maximum number of blades: 12 pcs. Main motor: 15.0 kW / 400 V Feed motor: 0.75 kW / 400 V Hydraulic pump motor: 0.75 kW / 400 V Lubrication pump motor: 0.18 kW Minimum log cutting length: 1.8 m Minimum board thickness (standard): 13 mm (9 mm with single blade installation) Log cutting height above ground: 880 mm Track height above ground: 600 mm Roller pressure: hydraulic Overall saw dimensions: 1.20 x 1.70 x H 2.10 m Total length of the unit with track: 10.00 m Lasdpfexawddex Abkek Weight with standard accessories: 3500 kg

Sąlyga: naujas, Gamybos metai: 2025, Roll diameter: mm 800 Max. cutting height: mm 400 Fixed work table: mm 1290 x 800 Max. saw blade width: mm 54 x 0.9 Max. and min. blade length: mm 5530 / 5380 Motor power: kW 15 (HP 20) Extraction hoods: No. 2 Ø 120 / No. 1 Ø 100 Compressed air consumption (wheel braking and feed roller opening): bar 6 Net weight: kg 880 "Dedoubleur" (splitter unit) Feed belt height: mm 300 Stop fence length: mm 750 Roller diameter: mm 160 Max. roller opening from blade: mm 200 Ledeglfv Dopfx Abkoak Max. stop opening from blade: mm 200 Infinitely variable feed speed: m/min 0–30

Gamybos metai: 1988, Sąlyga: beveik kaip naujas (naudotas), Lokalizacja Kłodawa 66-415 Warunki dostawy ODBIÓR WŁASNY Koszt dostawy Pokrywa klient Typ uruchomienia do uzgodnienia Opis Uwagi Ledpfxsdx Elmo Abksak Czterostronna strugarka, okleiniarka, maszyna do szpicowania Gabbiani Maksymalna szerokość strugania: 160 mm Maksymalna wysokość strugania: 100 mm Minimalna długość elementu: 180 mm Średnica wrzeciona: 30 mm Liczba wrzecion: 6 Kolejność wrzecion: dół, prawa, lewa, góra, góra, dół Podawanie gąsienicowe: góra, dół Płynna regulacja posuwu: 4–34 m/min Możliwość pracy pod kątem: 0°–30° Przenoszenie napędu przez kardan Manualna regulacja wysokości wrzecion Regulowane głowice we wszystkich kierunkach Automatyczne smarowanie toru Wszystkie łożyska wymienione na teflonowe Maszyna po pełnym przeglądzie Przystosowana do produkcji parkietu i listew Odpylacze: 6 x 120 mm Zasilanie: 400 V Całkowita moc: 26,2 kW Wymiary maszyny Długość: 4060 mm Szerokość: 1500 mm Wysokość: 1200 mm Uwaga: strugane stoły na całej maszynie oraz poziomowanie, ustawianie kątów.

Sąlyga: naudotas, Gamybos metai: 1980, mašinos/transporto priemonės numeris: GUS 71 Typ 26.813, Frame saw by Wusterer & Dietz includes: frame saw saw tensioner splitting wedge roller conveyor for frame saw Ljdpfx Abov Ummboksak 4-strand take-off unit Inspection possible by appointment.

Sąlyga: naudotas, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture: 2017 Thermal treatment plant / thermo-chamber for wood modification The WTT thermo-chamber is a facility for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on the thickness and type of wood. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler unit using thermal oil as the heat transfer medium. Technical details: Capacity: 5,950 - 9,900 m³ timber per year (based on 330 working days) Effective volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + neutral + earth, 63 A Lodpfx Asv Si Szebkoak Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave for thermal treatment 2. Vacuum system to evacuate the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, heated only) Control and operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for easy trolley movement Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional description: 1. Loading the autoclave with wood 2. Creating pre-vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalisation 8. Creating post-vacuum / drying 9. Pressure equalisation 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of a customer, ex location near 5020 Salzburg (Austria), without dismantling, transport, or installation Dismantling, loading, and transport by us available on request Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as-is Technical information, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; it applies: "purchased as inspected" Pictures and videos serve as samples and do not reflect the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, Good day, Lasdstykw Sepfx Abkek We are offering our very well-maintained crosscut saw from MS Maschinenbau. Technical Data: - Lengths between 600 mm - 3000 mm - Workpiece thickness min. 3 mm, max. 100 mm - Feed rate 5-30 m/min, infinitely variable - Roller conveyor included - Condition is as new If interested, the machine can also be tested on site. If you have any questions, please feel free to contact us.

Sąlyga: naujas, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface treatment - Quick and easy conversion from sanding to brushing - Wide range of brushes available for various effects and processing solutions - Infinitely variable feed and drum speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592 x 530 mm Table extension dimensions (2x): 582 x 245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010 x 1060 x 1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Ljdjwzzivopfx Abksak Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for used-look finishing and a pronounced grain effect

Sąlyga: geras (naudotas), Gamybos metai: 1994, Drum chipper, high-speed model with horizontal feed Maximum feed width: 300 mm Maximum feed height: 85 mm Motor: 18.5 kW Frequency-controlled for variable speed Laedpfx Aou Rl Sfebkek Without vibrating chute