Hidraulinis agregatas, skirtas elektriniams griebtuvams

unbekannt 11 kW

Gamybos metai: 1986, Sąlyga: naudotas, Industrial extraction system, chip filter unit, filtration system, chip extraction, wood chip extraction, radial fan, chip extraction blower, fan, extraction, chip blower -unfortunately, no conveying data available -motor: MEZ Type 4AP80-2 -motor power: 1.1 kW -speed: 2840 rpm -inlet connection: Ø 60 mm Nwedpfx Ajfxx Nnjghop -outlet connection: Ø 400 mm -base frame: on castors -dimensions: 940/540/H1510 mm -weight: 74 kg

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions Nedpfx Agsd Ab H Hehjwp • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Gamybos metai: 2009, Sąlyga: geras (naudotas), Hidraulinis cilindras, atraminis cilindras, hidraulinė stūmoklio strypas, spaudimo stūmoklis Nwsdpsdq U S Isfx Aghjp - Spaudimo jėga: prie 250 bar – 96 t - Stūmoklio skersmuo: 220 mm - Stūmoklio strypas: Ø 125 mm - Cilindro vamzdžio išorė: Ø 260 mm - Eiga: 495 mm - Bendras ilgis įtrauktoje padėtyje (centras-centras skylė): 1195 mm - Stūmoklio strypo tvirtinimas: Ø 100 mm - Cilindro tvirtinimas: Ø 100 mm - Universalus pritaikymas - Kiekis: 15 cilindrų - Kaina: už vienetą - Matmenys: 1360/530/H300 mm - Svoris: 364 kg/vnt.

Sąlyga: naujas, Load capacity 5 t Workpiece diameter 250 - 2500 mm Drum diameter 250 x 100 mm Feed rate 100 - 1000 mm/min Total power requirement 0.75 kW Features • Self-aligning for multiple diameters • Electronic quality components from Schneider/Siemens/Delta • Infinitely variable speed control of the drive unit • Polyurethane coating on the drive rollers • Optimal load distribution (4 rollers/unit), especially gentle on workpieces with thin walls and sensitive surfaces • Remote control with cable and double foot pedal • CE certificate Nwsdpfx Ajfv A A Ujghep • 3-year warranty (See warranty conditions)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1979, Rope-Produktionslinie / Litzen-Umlaufanlage REDAELLI Linie: Stabilisierte Spannbetonlitze aus Beton Nwsdpfx Ajt Iq Hboghsp 3- und 7-drahtige Litzen, die bei Trägern mit großen Spannweiten, Brückenelementen sowie großformatigen Spannbetonteilen eingesetzt werden, z. B. Deckenelemente, Pfähle, vorgespannte und nachgespannte Konstruktionen. - Baujahr: 1979/2005 - Spulengröße (Pay-off): 800 x 900 mm - Litzenproduktionsbereich: - 3/8" – 1/4" - 1/2" – 5/16" - 6/10" – 7/16" - 7/10" – 9/16" - Coil-Gewicht: 4.000 kg - Produktionsgeschwindigkeit: 40–60 m/min - Drahtmaterial: hochfester Kohlenstoffstahl - PC-Litzengrößen: - 6,4 – 6,9 – 9,3 – 21,5 mm - Elektrische Versorgung: 400 kW Die Linie besteht aus: - Drahtabzug (Wire Pay-off) - Verseileinheit (Twisting Unit) - Ofen (Furnace) - Kühlsystem (Cooling System) - Zugrollen (Traction Rollers) - Litzenwickler (Winding the Rope)

Sąlyga: geras (naudotas), Technical data: Working width: 4050 mm Maximum bending capacity: 6.0 mm Maximum prebending: 4.0 mm Top roll diameter: 210 mm Side lower roll diameter: 210 mm Central lower roll diameter: 210 mm Conical bending device by tilting both side rolls Hydraulic drop-end bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons The seller assumes no liability for typographical or data transmission errors. The machine's visual condition, technical state, and level of wear are consistent with its age; used machines are sold without any warranty. Nwsdpfxjwkaalo Aghsp

Gamybos metai: 1969, Sąlyga: labai geros būklės (naudotas), For sale: Mandrel tube bending machine. The machine is fully operational and comes with a comprehensive set of tools. Schratze-Wirtz WE2W0DS Year of manufacture: 1969 Length: 9600 mm Width: 3500 mm Height: 2000 mm Tube bending dies included: fi 83 - R300 fi 88.9 - R300 fi 101.6 - R250, R400 fi 108 - R450 Nedpepxkwlefx Aghewp fi 114.3 - R550 fi 133 - R400 fi 137 - R500 fi 168 - R700 fi 193 - R600 fi 219 - R640, R800

Sąlyga: geras (naudotas), Hydraulic power unit, hydraulic pump, piston pump -Housing material: stainless steel -Drive: 11 kW -Speed: 1750 rpm Nwodpjb A Hcnefx Aghep -Pump: Vickers PVB10 RSV31 CG20 -Flow rate: approx. 36 L/min -Pressure: 210 bar -Hydraulic valve -Filter -Hydraulic tank dimensions: 500/450/H370 mm -Overall dimensions: 520/330/H600 mm -Weight: 320 kg

Sąlyga: naudotas, Spreading and pressing device with hydraulic unit WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreading pliers, hydraulic spreader Year of manufacture: 1988 / 1986 Hydraulic unit type E45 / 59600.0 Operating pressure max. 630 bar Flow rate approx. 2 l/min Tank capacity approx. 10 litres Spreader - pliers WEBER type SP30 / 059 198.0 Reach = arm length 340 mm Spreading width max. 810 mm Spreading force in working range max. 132 kN Closing force 99 kN - Double hose with quick-release coupling Rated power 0.9 kW Nodpfx Agjdzp S Rshowp Power supply 220 Volt, 50 Hz Weight hydraulic unit approx. 40 kg Weight spreading device approx. 25 kg Very good condition Hydraulic fire brigade rescue set with hydraulic power unit and one spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart. It is also suitable for compressing or lifting loads. Versatile application thanks to the multifunctionally designed spreader jaws made from drop-forged and hardened steel.

Gamybos metai: 1962, Sąlyga: geras (naudotas), Manufacturer: VEB Model: RV16 Workable cross-section: 120 x 140 mm Weight: 2.7 t Nsdpfoltiy Tsx Aghowp