Prispaudimo plokštė

UNBEKANNT / UNKNOWN

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Fpodpfx Aefg E Hpob Sjb Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 3 h, Funkcionalumas: visiškai funkcionalus, galia: 33 kW (44,87 AG), bendras svoris: 1 570 kg, kuro tipas: dyzelinas, spalva: originalus, ašių konfigūracija: 1 ašis, kuras: dyzelinas, Schliesing 325EX-D Chipper: The Compact Model with Rotatable Chipping Unit The Schliesing 325EX-D chipper is a powerful wood chipper, featuring a robust engine, flexible feed options, and a durable design, making it ideal for demanding wood processing applications. With a swiveling infeed chute and a range of safety features, it meets the highest standards and offers an efficient solution for processing logs up to Ø 20 cm in diameter. Fpedpfx Abov Ev E Us Sjb Technical Data: Type: Schliesing 325 EX Log Diameter: Up to Ø 20 cm Infeed Width: 24 cm Engine Output: 33 kW / 44.9 HP Weight: Approx. 1,570 kg Features: Engine and Chassis: • Water-cooled, Stage V Kubota 4-cylinder common-rail turbo diesel engine with DPF, delivering 33 kW / 44.9 HP. • Industrial overrunning clutch between engine and chipping disc to protect the engine, bearings, and shaft. • Fully galvanized, corrosion-resistant single-axle chassis rated up to 80 km/h with EU type approval. • Robust, fixed steel mudguards. • Front jockey wheel and rear support stand. • Road lighting according to StVZO with impact-protected components. • Pneumatic tyres 205/65 R15C with EU type approval. Body/Chute/Discharge Spout: • Folding infeed chute with a minimum feeding depth of 1,500 mm. • Fully galvanized chute flap for longevity. • Chute dimensions (internal): Width = 1,040 mm, Height = 960 mm. • Swiveling discharge spout with adjustable deflector flap. • Discharge spout mounted on a ball bearing slewing ring for flexible orientation. • Sound insulation on critical machine components such as the chipping hood and discharge spout. • Emergency stop button both on top of the feed chute and on the side of the chute flap. Chipping System: • Rotatable chipper housing with adjustable feeding angle up to 270°. • Safety circuit compliant with EN 13525. • Chipping disc with a diameter of Ø 655 mm and a thickness of 35 mm. • Enclosed knife system for quick and safe knife changes. • Steplessly adjustable chipper knives, each regrindable multiple times for long service life. • Horizontal counterblade and vertical countershear, each double-sided for extended durability. • Anti-wrap protection on the main bearing of the chipping disc. Hydraulic Infeed: • Infeed control with independent hydraulic circuit. • PowerGrip feed roller (240 mm wide) with hydraulic infeed for strong and consistent material feed. • Parallel guidance of the upper feed roller for even feeding without skewing. • Hydraulically adjustable feed speed to control chip size. • Level indicator for the hydraulic oil tank.

Sąlyga: naudotas, Clamping Plate – Table of a Long Planer Machine – Table Width / Clamping Width: 1,845 mm Table Length / Clamping Length: 5,505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot pitch: 263 mm Overall Length: 6,230 mm Fodpobn Amfjfx Ab Sjpb Total Plate Height: 350 mm Weight: 11 t

Sąlyga: geras (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, GEBRAUCHT Soraluce Soramill Modell SP 10000 Portalfräsmaschine, Tischtyp, mit CNC-Steuerung, Verfahrsäule, automatischem ölnebelschmierten orthogonalen Fräskopf mit 1 x 1 Grad Indexierung und HEIDENHAIN TNC 430 M Steuerung. Baujahr 2002, SN 8647. Tischfläche: 10.000 x 1.100 mm X-Achse (Längsverfahrweg): 8.500 mm Y-Achse (Vertikalverfahrweg): 1.600 mm Z-Achse (Ram-Verfahrweg): 1.200 mm Spindelmotor: 28 kW Spindelaufnahme: Standard ISO 50, BT50 Zugbolzen: DIN 69872-Form A, ISO 7388/2-Form A Unabhängiges 2-stufiges Getriebe Drehzahlbereich: 20–4.000 U/min Vorschubbereich: 5–5.000 mm/min Eilgang (X, Y, Z): 15.000 mm/min Präzisions-Kugelgewindetriebe mit vorgespannten Doppelmutter-Systemen in allen Achsen. Linearführungssystem mit umlaufenden Zylinderrollen und Stahlführungsbahnen in X-, Y- und Z-Achse Unabhängige AC-Servomotoren pro Achse Wegmesssysteme (Glasmaßstäbe) in X, Y und Z mit Luftspülsystem Automatische Werkzeugklemmung und hydraulisches Werkzeugwechselsystem CNC-Steuerung: HEIDENHAIN TNC-430-M (Flacher TFT-Monitor, digitale Antriebe) 9 Achsen CNC, 1 Spindel, davon 5 Achsen simultan interpolierend Arbeitsbereichsbeleuchtung Klimatisiertes Schaltschrankkühlsystem Schaltschrankinnenbeleuchtung Heidenhain HR410 Fernbedienung mit 3m Spiralkabel Horizontal schwenkbares Bedienpult für CNC Orthogonalkopf 28 kW, 800 Nm, 1° x 1°, 4.000 U/min Ölschmierung. Preis inkl. Öl-Kühleinheit für Kopf und Getriebe. Option G2 (Ram für 4.000 U/min vorbereitet) enthalten. Spindelkühlsystem (AD-Typ) integriert. Fpsdpfx Aer Hr Areb Ssb Kühlsystem mit 500l-Tank, zwei Pumpen für Niederdruck (3 bar) und Hochdruck (8 bar), Förderleistung 50 l/min, inkl. kombinierter Papier-/Magnettrommelfiltereinheit. Bedienerplattform fest an der Säule verbaut Werkzeugmagazin für 40 Werkzeuge, BT50 Max. Werkzeuglänge: 400 mm Max. Werkzeugdurchmesser: Voll bestückt = 120 mm, mit Nachbarfach frei = 250 mm Max. Werkzeuggewicht: 20 kg Mittleres Werkzeuggewicht (voll bestückt): 10 kg Maximales zulässiges Gesamtgewicht: 20 kg Späneförderer / Scharnierbandförderer Maschinenvorbereitung für die Nachrüstung eines 4. Achsen Elektro-Mechanik-Drehtisches Spritzschutz an der Stirnseite und beiden Seiten des Tisches, bestehend aus vier verschiebbaren Fronttüren (Höhe ab Boden 2.100mm, Länge je 1.700mm). Türen manuell bedienbar, mechanische Verriegelung, öffnen über gesamte Längsverfahrstrecke möglich. Tischrückseite offen. Schutzverkleidung an der Rück- und beiden Längsseiten der Maschinensäule.

Sąlyga: geras (naudotas), Gamybos metai: 2004, Valdymas: Siemens 840-D Fpedpsxn R Ncefx Ab Sob X eiga: 6000 mm Y eiga: 3000 mm Z eiga: 1000 mm W eiga: 700 mm Kuoliuko skersmuo: 150 mm Kuoliuko sūkio greitis: iki 2800 aps./min Kuoliuko galia: 51 kW Įrankių keitiklis: 80 įrankių Vertikalus frezavimo galvutė CNC apvalaus stalo dydis: 2000 x 2500 mm Stalo eiga V: 1500 mm Stalo leistina apkrova: 25 t 2 pagrindo plokštės Drožlių transporteris Automatinis galvutės keitiklis KF-D4 vertikali vienos ašies frezavimo galvutė, programuojama 2,5°

Sąlyga: naudotas, Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 07-16 1990, X ašies eiga: 2 000 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 800 mm, Parduodama geros būklės mašina, kaip matyti nuotraukose, pagaminta 1990 m., su NCT 90 valdymu. Naudota labai mažai, parduodama dėl neišnaudojimo. Bendras mašinos svoris – 33 tonos. Mašina visiškai veikianti. Išardymas ir transportavimas yra pirkėjo atsakomybė. Fpodpfx Abow Sx Ago Sob

Sąlyga: naudotas, Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 10 000 mm, Y ašies eiga: 2 600 mm, Z ašies eigos atstumas: 700 mm, Hersteller: PAMA Modell: SPEEDRAM 1 CNC Baujahr: 1996 Spindel: 140 mm Querweg: 10.000 mm Vertikalweg: 2.600 mm Pinolenhub: 600 mm Fpjdpfjwzh Apsx Ab Sjb Pinolengröße: 360 x 320 mm Spindelhub: 700 mm Spindelaufnahme: ISO 50 Spindelmotorleistung: 50 kW Spindeldrehzahlen: 6 – 2.000 U/min CNC-Steuerung: SELCA 3045 Werkzeugwechsler (ATC): 60 Plätze Gesamtgewicht: 65 Tonnen Ausstattung und Zubehör Komplett mit: - 1 automatischer Universalfräskopf - 1 Bodenplatte 6.000 x 2.500 x 300 mm - 1 Bodenplatte 4.500 x 2.000 x 300 mm - Rundtisch 2.000 x 1.600 mm, mit Längsweg 2.000 mm - Tischbelastung: 15 t - Nivellierfüße

Sąlyga: naujas, The Brugger PX180 wood chipper is a powerful machine designed for professional use. With an impressive capacity of up to 18 cm diameter, it allows efficient processing of logs. Fedpferblyrjx Ab Sepb The hydraulic feed is equipped with a 'NO Stress' system to ensure smooth material intake without overloading. Technical specifications: - Hydraulic feed with NO-Stress automatic control - Diameter up to 18 cm - Weight: 648 kg - PTO speed: 540 rpm - Three-point linkage: CAT 1, 2, 3 - Required tractor power: min. 50 HP Its robust construction and high-quality materials guarantee reliable performance and a long service life. Contact us for your tailored offer!

Sąlyga: naudotas, Technical Details: Table length: 3600 mm Table width: 3600 mm Fpedpfxsu N D Rqs Ab Sob Table load capacity: 50 t Table travel: 2000 mm longitudinal Table height above floor: 1350 mm Table speed: approx. 1000 mm/min Table rotatable: 360° Total power requirement: 14 kW Machine weight approx.: 38.5 t Machine dimensions (LxWxH) approx.: 5.5x3.7x1.4 m Space required approx.: 6.2x3.7x1.4 m Main applications: - For multi-sided machining - Supplement for travelling column milling machines or boring mills Equipment: - With digital travel measuring system for X-axis and rotation - Operation via control panel - Clamping plate boring table, weight 14 t (11 T-slots to DIN 650: a=42 mm; h=75 mm; b=70 mm; c=31 mm) The boring table/rotary table/milling table has been mechanically and electrically overhauled. The following work has been carried out: - Integration of a digital measuring system for the X-axis and an encoder for the C-axis - Integration of a control via operating panel - Renewal of hydraulic pipes/hoses, fittings, pressure gauges, flow restrictors, and filters - Re-bedding of both axis gearboxes - Renewal of axis gearbox seals - New control cabinet and complete rewiring of machine - Limit switches cleaned, checked, set, and defective limit switches replaced - Frequency inverter retrofitted for stepless speed control - Cracked gearbox housing repaired by cast locking - Renewal of guideway wipers (overhaul of guideway covers including new wipers) - Feed gearbox cleaned and resealed - Feed motor re-bedded - New paintwork The boring mill table/rotary table can be demonstrated under power. Please see our demonstration video to see the machine in operational condition!

Sąlyga: naudotas, Gamybos metai: 1980, stalo apkrova: 60 000 kg, stalo plotis: 3 500 mm, X ašies eiga: 2 500 mm, stalo ilgis: 3 500 mm, PEGARD - TRT 3500 x 3500 / 60 MACH-ID 8879 Manufacturer: PEGARD Model: TRT 3500 x 3500 / 60 Control system: Siemens 840 C Year of manufacture: 1980 Hydrostatic table Heidenhain ROD encoder for rotation Controlled via Siemens 840C CNC Specifications Metric US Standard Table length: 3500 mm Table width: 3500 mm Table load capacity: 60,000 kg Feed V-axis: 2500 mm Rotation B-axis: 720° Dimensions (approximate): Fsdpfx Abeuxnzrs Sepb Length: 6000 mm Width: 3500 mm Height: 1400 mm Weight: 42,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Accordingly, this does not constitute any representation or contractual terms. We recommend verifying all critical details.