Hidr. žirklinio keltuvo stalas

TREPEL - L. A. VAN EIJLE & Co.

Gamybos metai: 2017, Sąlyga: labai geros būklės (naudotas), Bluhm Weber Legi-Air 4050 Labeling Machine Rodpfx Aefp A I Ejgiep Additional units in stock! Year of manufacture: 2016–2019 Print resolution: 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed: Up to 400 mm per second Stamp sizes (mm): Tamp-blow standard from 12.5 x 7 up to 160 x 300 mm. Label lengths must be limited accordingly. For certain label qualities, longer or smaller labels are possible with special applicator pads. Label gap: Minimum 3 mm Label roll: 300 mm diameter, up to 450 linear meters, 76 mm (3") core, outside winding (optional inside winding) Data interfaces: RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W): 770 x 560 x 580 mm, Applies to systems with 250 mm stroke Controller display: Multilingual user guidance 5.7" VGA touch display Service interval indicator Retrieve, edit, and store label data USB port for storage media or keyboard Compressed air connection: 6 bar, air must be clean, dry, and oil-free

Sąlyga: naujas, Table length: 2200 mm Table width: 1500 mm Lifting height: 1850 mm Load capacity: 2000 kg Minimum lifting height: 260 mm Total power requirement: 1.5 kW Redpfxoupxwks Agiop Lifting speed upwards (unloaded): 40 sec. Lifting speed downwards (unloaded): 30 sec. Connection voltage: 400 V Machine weight approx.: 0.45 t Space requirements approx.: 2.2 x 1.5 x 0.26 m The hydraulic lift tables are electrically powered and operated. They are equipped with a safety contact strip for secure lowering operation. Widely applicable for workshops, assembly departments, loading bays, etc.

Gamybos metai: 2023, Sąlyga: naujas, Maximum chipping height: mm 200 Feed width: mm 500 Feed rollers: pcs. 3 Rotor diameter: mm 600 Chipping length approx.: mm 20–30 Output capacity: 16–20 rm/h wood chips Chipping knives: pcs. 2 Feed motors: kW 2x2.2 Net weight approx.: kg 4100 Feed: horizontal Machine frame: steel, shielded gas welded Rotor: steel, shielded gas welded, dynamically balanced Bearing: Oversized roller bearings Bearing housing: steel flange housings Redsncd Azepfx Agijp Feed rollers: steel, specially toothed Chip discharge: below the machine Screen: (sieve) for re-shredding overlength material Drive pulley: matched to main motor N=1500 min-1 Hydraulic system: consisting of hydraulic pump, membrane accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Sąlyga: geras (naudotas), Glass laminating line Type: Vacuum Glass Laminating Line HVD-G02 Vacuum Glass Laminating Line Glass laminating machine, equipped with 2 heating units TOOL TEMP Model Type TT-138B, S/N 310-1877-1, 310-1877-2 Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control: tower PC, 17" LCD monitor (ACER), Model/Type AL711, mouse, keyboard The plant consists of the following main assemblies: - Vacuum chamber (chamber + lid) - Pneumatic lid drive - Roller conveyor - Lifting device - Heating plates - Chamber frame - Vacuum technology (pump assembly, valves, piping, feedthroughs, measuring technology, etc.) - Pressurized water temperature control unit (2 pcs) - Transport pallet - Lifting frame - Control system with control panel Technical data: Stepwise evacuation via adjustable valves down to 0.01 mbar; Heating/cooling times can be set via control system Heating temperature on the pressurized water temperature control unit can be set directly Rjdpfedkp D Hsx Agiop (Max. 140

Gamybos metai: 2020, Sąlyga: naujas, Oxygen and temperature measurement in molten metals Rjdpfjgqr A Djx Agiep

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, galia: 18,5 kW (25,15 AG), pavaros tipas: hidrostatinis, kuro tipas: dyzelinas, kuro bako talpa: 50 l, spalva: raudona, bendras svoris: 2 600 kg, tuščias svoris: 2 500 kg, kėlimo galia: 1 000 kg/m, kėlimo aukštis: 3 310 mm, padang padangų: 100 procentas, ašių konfigūracija: 2 ašys, sėdimų vietų skaičius: 1, kaušo tūris: 0,4 m³, kasimo kibiro plotis: 160 mm, Gamybos metai: 2025, keliamoji galia: 980 kg, Įranga: diferencialo užraktas, galvos apsauga, hidraulika, kabina, padėklų šakės, papildomi žibintai, priekabos jungtis, reguliuojamas strėlė, standartinis kaušas, visų varančiųjų ratų pavara, The H&R 2210-T telescopic loader, equipped with the new 3-cylinder Perkins turbo engine with 18.5 kW (manufactured in Mannheim, Germany), complies with the Euro 5 emission standard even without a soot filter. Rsdpfoul Af Dex Agisp The new turbo engine is particularly efficient, and with the 2-speed hydrostatic drive, it reaches up to approx. 16 km/h. Thanks to the generous steering angle of 42° and a small turning radius, it can be easily operated in confined spaces. The 2210T wheel loader with telescopic boom comes standard with a quick-change pallet fork and a standard bucket, allowing you to start work immediately. An additional hydraulic circuit enables the use of various attachments for yard work. The telescopic arm provides the 2210-T with excellent outreach. The E-mode function on the joystick ensures particularly comfortable operation of the H&R 2210T. H&R loaders are technically and visually optimized in-house and undergo thorough inspections. In addition, every machine receives comprehensive rust protection treatment. Our loaders are CE compliant according to the EU Machinery Directive. Each machine receives a TÜV Süd certificate for obtaining individual operation approval according to §21 StVZO (road registration / operating license as self-propelled working machine). Advantages of the H&R 2210T Telescopic Loader: • Fully equipped • Efficient German-made engine (Euro 5) • Extensively optimized in-house • Extendable telescopic arm • Heated comfort cab • Includes pallet forks • Includes 150 cm standard bucket • Joystick with float position and E-mode • Auxiliary hydraulics for front attachments • Hydraulic oil cooler • Brake inching pedal • Reversing camera with display • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5 -15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch • 1-year spare parts warranty • CE compliant according to EU Machinery Directive Price: Net: 24,975.00 € VAT: 4,745.25 € Gross: 29,720.25 € Financing available! Optional: 2-year warranty: €590 TÜV road approval / operating permit for working machinery: €595 Transport within Germany & Austria upon request Technical Data: Engine: 3-cylinder Perkins turbo Power: 25 HP Emission class: Euro 5 Lifting capacity: 980 kg Lifting height: 3,310 mm (lower edge of standard pallet fork) Dumping height: 2,796 mm (lower edge of standard bucket, fully tipped) Lift/Lower time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3,710 x 1,496 x 2,340 mm Weight: 2,430 kg Tires: 31 x 15.5 - 15 Accessories and spare parts are available from us. Please include your phone number with your inquiry!

Sąlyga: naujas, Gamybos metai: 2025, The Multiblade or Single Shaft Multiblade Circular Saw SQUALO 515 in the LM version features an advanced movable blade system. The machine is equipped with motorized feed rollers on the work table as well as motorized top pressure rollers, ensuring effective all-wheel drive for precise and consistent transportation of wooden material. In the LM (Movable Blades) configuration, the cutting unit consists of one fixed blade and a variable number of movable blades (from one to three). These movable blades can be dynamically positioned to suit different edging requirements and multiple cutting operations. A distinguishing feature of this model is the ability to expand the cutting capacity: by using special arbors, the number of blades used simultaneously can be increased up to six. It should be noted that blades mounted on these special arbors operate at a predetermined fixed distance, enabling efficient production of elements with standardized widths. This versatility allows the machine to easily switch from processes requiring flexible blade positioning to series production with fixed cutting intervals. Redpfx Agshpbxisiep

Sąlyga: beveik kaip naujas (naudotas), Manufacturer: V. Randwijks Rjdpfx Agjg Snt Ssijp Rotor diameter: 500 mm Rotor width: 700 mm Drive: 22 kW / 1,470 rpm

Gamybos metai: 1990, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Four-side planer WEINIG, 7-head, universal, head configuration: bottom horizontal, right vertical, left vertical, right vertical, top horizontal, bottom horizontal, and final universal head. Drive is implemented using cardan shafts. Head protection with Rotax safety clutches. Workpiece feed clamped pneumatically. Continuously adjustable feed through frequency inverter. Feed speed: 0–42 m/min. Motors: 2.5 kW and 7.5 kW. Table reground and new. Additionally equipped with new wiring and new electrics. Machine fully refurbished. Warranty provided. Rodjpqxnxepfx Agiep

Sąlyga: naudotas, Track width: 540 mm Rodpfoglandsx Agisp Rollers: Conical