Rankinis keltuvas

TOYOTA SWE145

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, veikimo valandos: 246 h, keliamoji galia: 1 450 kg, kėlimo aukštis: 4 800 mm, laisvas kėlimas: 1 694 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 162 mm, šakių ilgis: 1 150 mm, pavaros tipas: Elektro, Electric high-lift stacker Load centre: 600 mm Mast type: Triplex Lhsdpeu D Sx Sofx Ahcol Technical condition: very good Battery voltage: 24V Battery capacity: 210Ah Battery manufacturer: Toyota Battery year: 2018 Battery condition: 80 - 100% Description: All prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no returns. Inspection available by appointment. Our general terms and conditions apply. 6 km/h, standard hydraulics, PIN code operation, friction drive, support wheel with Vulkollan, tandem fork rollers, E-bar, writing desk, small item holder with creep speed drive unit for increased residual capacity, finger guard grid, without protective bar, lithium-ion.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Winch incl. Lifting capacity max. 2 t at 2.7 meters Lifting capacity max. 1 t at 5.3 meters Operating hours: 270 h Lhedpfx Ahoq N E U Ajcsl Electric: yes

Gamybos metai: 1998, būklė: paruoštas naudoti (naudotas), Airflow: 13,600 m³/h, Pressure increase: 3,100 Pa, Speed: 1,500 rpm, Motor power: 18.5 kW, Weight: 790 kg, with STBB HAB S chip container, including complete documentation. Lhodpfx Ahei A Ix Hocsl

Būklė: naudotas, Gamybos metai: 2018, veikimo valandos: 10 347 h, bendras aukštis: 2 400 mm, bendras ilgis: 7 000 mm, bendras plotis: 2 400 mm, Spalva: pilka Svoris be apkrovos: 3 450 kg - Pagaminimo metai: 2018 - Dokumentacija: yra - CE ženklas: yra - CE sertifikatas: yra - Eksploatavimo valandos: 10 347 - Frezavimo velenų skaičius [vnt.]: 1 - Frezavimo velena 1: - Valdomų ašių skaičius [vnt.]: 5 - Mažesnisis veleno sukimosi greitis [aps./min.]: 600 - Didžiausiasis veleno sukimosi greitis [aps./min.]: 24 000 - Pagrindinio variklio galia [kW]: 8,5 - C ašis: yra Lsdpextbgpefx Ahcshl - Frezavimo stalo tipas: balkinis - Įrankių laikiklis: HSK-F63 - Medžiagos tvirtinimo sistema: pneumatinė - Gręžimo įrankis: yra - Variklio galia [kW]: 2,64 - Horizontalios gręžimo velenos [vnt.]: 10 - Vertikalios gręžimo velenos [vnt.]: 24 - Pjovimo įrenginys: yra - Įrankių keitiklio padėtys [vnt.]: 25 - Sistema/programinė įranga: Xilog plus - Saugumo priemonė: buferis - Vakuuminis siurblys: yra - Skaičius [vnt.]: 1 - Gamintojas: Becker - Tipas: Picchio - Pagaminimo metai: 2018 - Pagrindinio variklio galia [kW]: 2,5 - Talpa [m³/val.]: 108 - Jungties skersmuo [mm]: 80 - Be alyvos: taip - CNC parinktys: lazeris vakuuminio siurblio padėčiai nustatyti, atliekų konvejeris, brūkšninių kodų skaitytuvas - Darbinis plotas X [mm]: 3110 - Darbinis plotas Y [mm]: 1320 - Darbinis plotas Z ašyje [mm]: 180 - Įtampa [V]: 400 - Srovės suvartojimas [A]: 47,2 - Saugiklis [A]: 63 - Galia [kW]: 10,0 - Transportavimo matmenys: 7000 mm x 2400 mm x 2400 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 3450 kg - Transportavimo pakuočių skaičius [vnt.]: 1 Finansinė informacija PVM: nurodyta kaina yra be PVM PVM / Diferencinis apmokestinimas: PVM galima atskaityti įmonėms Pristatymas ir mainai galimi bet kuriuo metu, visoms pramoninėms prekėms. Yorick Diebels

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Lhodpfevwbp Aox Ahcel

Būklė: naujas, Gamybos metai: 2025, Rącznice podawania kłód do traków taśmowych Długość: 4–10 m Wysokość: zgodnie z wysokością traka taśmowego 2, 3 lub więcej torów z ciężkimi łańcuchami Napęd hydrauliczny lub elektryczny przekładniowy Ramię hydrauliczne z rozdzielaczem do podawania kłód na stół traka Długość ramienia hydraulicznego: 800–1500 mm w zależności od rodzaju traka Ljdpsvt Dk Iefx Ahcohl Łańcuch napędzany hydraulicznie na ramieniu hydraulicznym do przemieszczania kłód

Būklė: naujas, Gamybos metai: 2026, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; Lhsdpeiidm Njfx Ahcjl - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: reikia remonto (naudotas), Funkcionalumas: nepatikrintas, Medienų paketų krašto apdirbimo įranga „dimter HK 400“ krašto apdirbimo įranga Įeinančių medienų ilgis: 800–6000 mm Frezuojamas aukštis: 285 mm, papildomai 300 mm Spalva: mėlyna Sudaro: Poz. 01 Paketavimo įranga Poz. 02 Paketų transportavimo įranga Poz. 03 Centrinis frezas Poz. 04 Paketų transportavimo įranga Poz. 05 Paketų atskyrimo įranga Poz. 06 Grandininis skersinis transportuotojas Poz. 07 Tiekiamasis transportuotojas Poz. 08 Taktinis presas Poz. 09 Pašaravimo įrenginys Poz. 10 Ilgio pjūklas Įskaičiuojant valdymo spintą ir valdymo pultą Įranga yra sugedusi ir parduodama tokios būklės. Ji jau išmontuota ir sandėliuojama Achernyje. Lhjdpsvi Hw Njfx Ahcjl Visi techniniai dokumentai yra. Jei turite klausimų dėl įrangos ar norite gauti techninę informaciją, visada galite kreiptis į mus. Mes konsultuosime jus dėl įrangos remonto ir surinkimo.

Būklė: naudotas, Gamybos metai: 1995, Cutting width: 375 mm Cutting height: 150 mm Saw blade dimensions: 500 x 30 mm Motor power: 2 x 3 kW Cutting length: 5100 mm Speed: 2800 rpm Air pressure: 6 bar Machine weight: approx. 700 kg Space requirement: approx. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Robust cast construction of the saw unit * Large cutting capacity, allows simultaneous cutting of 2 profiles * Easy adjustment of the movable unit via roller guide * Double bearing for the swivel device * Safe clamping system with two-pressure system * Double guide for the saw feed * Hydropneumatic saw feed * Correction scale for external dimensions * Left saw unit fixed * Swivel range 45°-90° Lhsdpfotv Rgrsx Ahcjl * Incl. extraction unit (without piping) ALKO Mobil-Jet 100, year of manufacture 2002

Būklė: geras (naudotas), Gamybos metai: 1972, Scissor Lift Table, Scissor Lift Platform, Scissor Work Platform, Scissor Lifting Platform, Single Scissor Lift Table Ledpfx Ahomghawocjhl -Manufacturer: Lödige, Scissor Lift Table -Load capacity: 1000 kg -Platform dimensions: 3000 x 2000 mm -Height when retracted: 390 mm -Height when extended: 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg