Rankinis palečių vežimėlis

TOYOTA LWE250

Būklė: geras (naudotas), Copeland Compound Refrigeration Units Deep-freeze / Normal cooling - 4x Copeland Compressors D6DT5-320X-AWM/D - Cooling capacity: 220 kW at -10ºC / +40ºC, 56 kW at -35ºC / +40ºC Lasdpfx Amjg N Hu Se Rog - Displacement: 4 x 126.9 m³ - With original Güntner condensers GVH 067B/2x3N - Quantity in stock: 1 unit - Refrigerant: R404A - In very good condition We have many other refrigeration units: Bitzer, Copeland, Frascold, Lunite, Küba, Güntner, ECO, Alfa-Laval, Goedhart, Helpman We offer a wide selection of refrigeration equipment: chillers, compressors, coolers, condensers, cold rooms, refrigerating and catering furniture as well as machinery and equipment for gastronomy and meat processing. Check our other listings or call us—many items are not listed on Machineseeker.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, Parduodu nuotraukose matomą transporterį. Kviečiu susisiekti. Ljdoxlaa Sepfx Am Rsag

Gamybos metai: 2026, būklė: naujas, The washing unit with integrated milling machine for fruit and vegetables is constructed entirely from stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruit is introduced into the water, where it undergoes a preliminary wash. Afterwards, the fruit is conveyed onward via the belt, which thoroughly cleans them using fresh water. After washing, the fruit is transferred to the mill, where it is processed with the desired screen to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed infinitely adjustable in both directions • Equipped with 2 swivel castors • Equipped with 2 fixed castors Technical specifications • Rated capacity: 2,000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1,400 mm • Connection for wash tank: G 6/4" • Connection for cleaning: G ½" • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2,700 mm Width: 840 mm Height: 2,270 mm Weight: 150 kg Ljdpfx Ajv Srgujm Roag

Būklė: paruoštas naudoti (naudotas), The crown caps are fed manually into the drop chute; the machine places the crown cap onto the bottle and presses it on. Lodpfofh Dlrsx Am Roag

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Lsdpfxoh Ek Dao Am Rjag Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: naudotas, Gamybos metai: 1999, 6 stovinčių sandėliavimo talpų su apvalkalo aušinimu Mašina (papildomai): stovimos, aušinamos nerūdijančio plieno talpos Talpa: 2200 l Maks. slėgis: 0,99 bar Ledpfx Aew Tlppjm Rjag Ilgis: 1000 mm Plotis: 1000 mm Aukštis: 1965 mm Valdymas / kontrolė: rankinis Medžiaga: nerūdijantis plienas 1.4301 Padėtis / pozicija: laisvai stovinčios Pagrindinė konstrukcija: cilindrinė talpa su išgaubtais dugnais ir kvadratinio vamzdžio kojomis su kalotėmis Įranga: purškimo rutulys, dangčio įtaisas, manometras, 1 apvado aušinimo zona, matavimo žarna talpos lygiui nustatyti, apžiūros anga, termometras ir mėginių ėmiklis apvade, rankinis vožtuvas aušinimo reguliavimui, centrinis dugno išleidimas

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 3 443 h, CLARK FORKLIFT LOAD CAPACITY: 5,000 kg DIESEL NEW FORKS LENGTH: 1.80 m ORIGINAL FORKS LENGTH: 1.20 m (INCLUDED) NEW SEAT WITH ARMREST MAX. LIFTING HEIGHT: 4.80 m OPERATING HOURS: 3,443 Lodpfxewtffxs Am Reag MAINTENANCE SERVICE CARRIED OUT IN MAY 2025 READY FOR IMMEDIATE DELIVERY

Būklė: naudotas, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC control: HEIDENHAIN TNC 155 Serial No. 16186651 Year of manufacture: 1986 Spindle mount: FEHLMANN SF32 Ljdpehik Ezjfx Am Reag Drilling capacity: Ø 30 mm in steel Thread cutting up to M20 in steel Travel paths: X: 850 mm, Y: 435 mm Quill stroke (Z): 210 mm Vertical travel of milling head: 580 mm Feed rate X and Y: 1 to 8000 mm/min Feed rate Z: 1 to 4000 mm/min Rapid traverse X and Y: 8 m/min Rapid traverse Z: 4 m/min Table clamping area: 1570 x 500 mm Distance spindle nose - table: 130 - 720 mm Distance spindle – column: 450 mm Spindle speed: 50 - 7100 rpm, stepless Spindle drive: 10 kW Total connected load: 20 kW Power supply: 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3-axis control: X, Y, and Z quill adjustment - Hydro-mechanical tool clamping FEHLMANN SF32 - Thread cutting device - Cable remote control for machine operation and axis movements - Motorized vertical movement of milling head with cut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with FEHLMANN SF32 holder - 20 tool holders FEHLMANN SF32 - Swiveling tool carrier with 21 tool stations - Coolant system integrated in machine base - Control cabinet fixed to the machine - Documentation: operating manual, control manual, and electrical diagrams Required space (L x W x H): 2350 x 2000 x 2300 mm Weight: 3.2 tons Very good condition

Būklė: geras (naudotas), 1 x bench drill Solid TB 16 in good technical condition. Technical specifications: Spindle taper: MT2 Speeds: 200 - 3200 rpm Table clamping surface: 260 x 330 mm Accessories: Keyless drill chuck 1 - 13 mm Drift key The machine can be inspected under power. Laedpjwyw Apofx Am Reg

Gamybos metai: 1997, būklė: naudotas, Used progressive cavity pump Manufacturer: Seepex Lasdpfx Amsillx Ie Reg Model: BN10 Year of manufacture: 1997 Capacity: 0.5–12 m³/h Speed: 40–430 rpm Pressure: 16 bar Looking for a specific pump? We have additional used pumps in stock – please contact us for further information.