Keturratis šakinis krautuvas

TOYOTA 7FBMF25

Sąlyga: naudotas, Gamybos metai: 2012, veikimo valandos: 1 210 h, keliamoji galia: 2 500 kg, kėlimo aukštis: 5 000 mm, laisvas kėlimas: 1 500 mm, stiebo tipas: triplex, statybinis aukštis: 2 600 mm, pavaros tipas: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: Superelastic Front tires condition: 60 - 80% Rear tire type: Superelastic Rear tires condition: 40 - 60% Cpjdpfx Aeul Hnpef Tou Battery voltage: 48V Battery year: 2019 Battery condition: 60 - 80% Description: The vehicle undergoes UVV (safety) inspection. Prior to delivery, the machine receives a full service and is cleaned. Repainting is available upon request. Sideshift, 3rd valve, 4th valve, rear work light, front work light, heater, fully enclosed cabin, full free lift.

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Naujas Friulmac EQ 004 2.5 su padavimo konvejeriu ir padavimo bunkeriu Cpsdpfxsvupm Dj Af Tou Valdymas liečiamu ekranu ir automatinis reguliavimas Darbinis ilgis: min 190 mm – maks 2500 mm Plotis: min 30 mm – maks 250 mm Storis: min 12 mm – maks 35 mm Greitis: 6–25 m/min 2 x 2 Viršutinis velenas – 3 kW – 720 aps./min. Pagrindinis profiliavimo velenas – 4 kW – 7200 aps./min. Dėl išsamesnės informacijos galiu atsiųsti originalią dokumentaciją.

Sąlyga: naudotas, Funkcionalumas: ribota funkcionalumas, Gamybos metai: 2007, veikimo valandos: 11 106 h, kuro tipas: elektrinis, stiebo tipas: triplex, spalva: oranžinė, Įranga: apšvietimas, kabina, padėklų šakės, šoninis poslinkis,

Sąlyga: visiškai atnaujintas (naudotas), VERSCHIEDENE MOTORTYPEN UND SCHLITTEN FÜR CELASCHI DET GEBRAUCHT, KOMPLETT GENERALÜBERHOLT Cjdpfsdvlcyex Af Topu

Gamybos metai: 2001, Sąlyga: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Cpjdpfx Aefxpbmof Tou

Sąlyga: naudotas, Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, bendras plotis: 400 mm, galia: 26 kW (35,35 AG), TECHNINIAI DUOMENYS Didžiausias darbo plotis: 400 mm Darbo aukštis: 2 - 150 mm Minimalus ruošinio ilgis: 150 mm Darbo stalo aukštis: 900 mm Cpedpfsw Thpfox Af Teu Elektros varikliai: Plonų lakštų obliavimo variklio galia: 22,0 kW Pavaros variklis: 3,0 kW Kėlimo variklis: 0,50 kW Įrankis: Rotoriaus sūkių skaičius: Su reguliuojamu pavaros greičiu: 2.100–3.000 aps./min Peilių skaičius: 48 vnt.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, number of engines: 4+4 Cpodpfsw D Nq Tex Af Tou opening: 6 metres

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 11415, Rotor diameter: 260 mm Rotor width: 260 mm 3-knife rotor, 2 stator knife rows Feed opening approx. 260 x 260 mm Csdjghgl Ijpfx Af Tepu Drive motor 5.5 kW Granulator with built-in feed device for bar stock. Weight approx. 500 kg

Sąlyga: naudotas, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture: 2017 Thermal treatment plant / thermo-chamber for wood modification The WTT thermo-chamber is a facility for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on the thickness and type of wood. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler unit using thermal oil as the heat transfer medium. Technical details: Capacity: 5,950 - 9,900 m³ timber per year (based on 330 working days) Effective volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave for thermal treatment 2. Vacuum system to evacuate the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Cpjdpov Si Szofx Af Teu Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, heated only) Control and operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for easy trolley movement Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional description: 1. Loading the autoclave with wood 2. Creating pre-vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalisation 8. Creating post-vacuum / drying 9. Pressure equalisation 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of a customer, ex location near 5020 Salzburg (Austria), without dismantling, transport, or installation Dismantling, loading, and transport by us available on request Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as-is Technical information, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; it applies: "purchased as inspected" Pictures and videos serve as samples and do not reflect the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Sąlyga: geras (naudotas), Kodas: 0136 Prekės ženklas: ITALPRESSE Modelis: FORMATIC 20.9 Hidraulinė membraninė presas Dvipusis lukšto laminavimas prie vienoje pusėje profiliuotų, kitoje - lygių plokščių, skirtų spintelių fasadų, stalčių priekinių panelių, rašomųjų stalų paviršių, valgomojo stalų ir virtuvės paviršių gamybai. Trimatė (3D) plastikinių folijų (PVC, PPE, ABS, transferinė folija) laminacija prie vienoje pusėje profiliuotų plokščių, gaminant: spintelių fasadus, stalčių priekines paneles, rašomųjų ir valgomojo stalų paviršius, virtuvės paviršius, prekybinės įrangos komponentus, vidaus duris ir pan. Plokštelės matmenys: 2000 x 900 mm Atstumas tarp plokštelių (daylight): 325 mm Cilindro eiga: 325 mm Cpodpjpbvqvjfx Af Tou Elektrinio katilo galia: 27 kW Spaudimo jėga: 300 t Cilindrų skaičius: 3 vnt. Hidraulinės stoties galia: 5,5 kW Slėgio valdymo manometras Automatinis slėgio atstatymas Atidarymo laikmatis Bendrieji matmenys: 3300 x 1400 x 2400 mm (aukštis) Svoris: 8100 kg