Plokščiagrandinės šlifavimo staklės TOS Hostivar BPH 320A

TOS Hostivar BPH 320A

Būklė: naudotas, Gamybos metai: 1985, Grinding length: 600 mm Grinding width: 200 mm Total power requirement: 7.5 kW Machine weight approx. 2.3 t O F F E R Fodpfx Ajwd Tx Usc Hjfw We can offer you, subject to prior sale and errors excepted, from stock on a non-binding basis: JUNG Horizontal Precision Surface & Profile Grinding Machine with Microprocessor Control Model: JF 520 MS Year of manufacture: 1985 2225 ----- Max. grinding length (table longitudinal travel): 600 mm Max. grinding width (cross travel): 200 mm Max. grinding height under the wheel approx.: 230 mm Max. distance table to spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. vertical feed grinding head: 500 mm/min Grinding wheel dimension: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, infinitely variable: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total connected load: approx. 7.5 kW - 400 V - 50 Hz Weight: approx. 2,300 kg Accessories / Special Equipment: • Microprocessor program control (SIEMENS) with easy screen display. The program sequences are set via decade switches and stops (with vernier) and monitored on the screen. • Programs: plunge grinding with/without cross positioning, surface grinding with step-over or continuous cross feed, creep feed grinding upcut or downcut with/without cross positioning. All programs with automatic roughing, finishing, spark-out cycles, and automatic retraction. • Automatic straight line dressing device AF 65 S with automatic dressing value compensation and automatic speed adjustment for constant cutting speed (with display) • DIAFORM – grinding wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed device with feed rate and motor load display • Short stroke device for controlling table reversal and table clamping (cross) • Swivelling JUNG sine magnetic chuck, 450 x 180 mm, mounted. Separate swivelling sine magnetic chuck 350 x 175 mm, fine-pole with stop • Coolant system with paper band filter, additional accessories, operating manual Condition: Very good condition with accuracy protocol by JUNG technician! Please click here for a video of the machine: Delivery: ex stock, immediate availability, FCA Metzingen Payment: strictly net - upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: C3300, šlifavimo ilgis: 4 500 mm, šlifavimo plotis: 300 mm, stalo ilgis: 4 500 mm, stalo plotis: 300 mm, reikalingas aukštis: 2 500 mm, vietos reikalavimas ilgis: 13 700 mm, reikalingas plotis: 2 500 mm, Reform AR45 T9 ZU C3300/86 Year of manufacture: 1986 Ffjdotqtn Depfx Ac Hsw Grinding length: 4,500 mm Grinding width: 300 mm Workpiece height: 250 mm Table or grinding arm swiveling range: ±90 degrees Segment head diameter: 560 mm Spindle diameter in front bearing: 120 mm Swivable: 2° Max. torque: 719.5 Nm Motor: B280, 55 kW Grinding spindle speed range: 0–730 rpm Control: BBC Baumüller drives Marposs measuring system Hydraulic clamping Grinding mist extraction: Hydrocyclone cleaning system Additional grinding unit ZU Feed rate: 2,000–35,000 mm/min Space requirement approx. 13.7 x 2.5 x 2.5 m

Būklė: beveik kaip naujas (naudotas), Gleason 104 Coniflex tiesių kūginių krumpliaračių pjovimo staklės Specifikacijos Gamintojas: GLEASON Modelis: 104 Būklė: Naudota Serijos numeris: 631406 Sandėlio numeris: DCN1749 Maks. skersmuo: 432 mm Modulis: 8,5 Min./maks. kūgio atstumas: 0-305 mm Fsdpfx Acextpk Ao Hjfw Aprašymas Komplektacija: - Atsarginiai krumpliaračiai - Naudojimo instrukcija

Būklė: naudotas, MOSTANA STANKO 1M65-5 SUNKIŲJŲ DARBŲ CENTRINIS TEKINIMO STAKLĖS GAMINTOJAS: MOSTANA STANKO, PAGAMINTA SSRS MODELIS: 1M65-5 METAI: 80-ųjų vidurys APDIRBIMO SKERSMUO VIRŠ LOVOS: 1000,0 mm APDIRBIMO SKERSMUO VIRŠ VEŽIMO: 650,0 mm GRIEBTUVO DYDIS: 1000,0 mm VĖLENĖS ANGOS SKERSMUO: 135,0 mm VĖLENĖS APSUKOS: 5–500 aps./min. VĖLENĖS GALIA: 22 kW PAPILDOMAI: Fodpsx Dmi Defx Ac Hjfw AUTOMATINIS VEŽIMO PADAVIMAS METRINIS IR ANGLIŠKAS SRIEGIMAS 1000,0 mm GRIEBTUVAS SU 4 ŽIOBTUVĖLIAIS 2 AŠIŲ SKAITMENINIS INDIKATORIUS ŠVARI LOVA DIRBO SU KOMPOZITAIS, BE METALO

Būklė: naudotas, Gamybos metai: 2003, BWO valdiklis Galvos apskritimo skersmuo maks. 700 mm Fedoxt Ur Sspfx Ac Hefw Pado apskritimo skersmuo min. 50 mm Profilio aukštis maks. 35 mm Veleno sukimosi greitis 0 - 5400 min⁻¹ Stalo apkrova maks. 500 kg Staklių matmenys 370x220x300 cm Bendras svoris apie 15000 kg Darbo valandos 94082 h Įranga: BWO valdiklis Visos ašys valdomos CNC Alyvos rūko ištraukimas Aušinimo skysčio valymo sistema su aušinimo agregatu Dittel balansuojantis įrenginys Priedai: Šlifavimo diskai Ø400mm (įskaičiuota) Šlifavimo diskų flanšai 1 vnt. Dr. Kaiser gamybos deimantinė formavimo ritinėlė Ø160mm Priešpriešinė atraminė viršūnė Valdymo spinta: Plotis 70 cm x Ilgis 280 cm x Aukštis 220 cm Staklės: Plotis 220 cm x Ilgis 370 cm x Aukštis 300 cm Aušinimo įrenginys: Plotis 170 cm x Ilgis 240 cm x Aukštis 250 cm

Gamybos metai: 1993, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Fodpscc D Ddofx Ac Hefw Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Chuck diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.

Būklė: naudotas, Gamybos metai: 2007, Siemens Sinumerik 840 D CNC Control Weight 57,000 kg Operating Voltage 400 V Gleason-PFAUTER CNC Gear Hobbing Machine P 2400/2800 Fjdewzyp Iepfx Ac Hefw For hobbing cylindrical and worm gears as well as all other hob-capable profiles and shapes regularly occurring on cylindrical workpiece surfaces. Large hobbing machines from Gleason deliver maximum productivity for roughing and finishing operations on cylindrical gears for numerous industries: wind power plants, industrial gear units, mining and shipbuilding, gear manufacturing, and more. The machine's drive power range is designed to accommodate future tool developments. The gear hobbing head drive is, of course, backlash-free. These machines are particularly well-suited for the use of state-of-the-art cutting tool materials, regardless of whether dry or wet machining is preferred. The machine can be used for both dry and wet machining and is equipped with the corresponding chip conveyor for both operating modes. The machine is fitted with an internal profile milling head as a motor-driven milling head. --> Working Range and Technical Data Workpiece nominal diameter: 2,400 mm Maximum hobbed diameter approx.: 2,800 mm Minimum/maximum distance between cutter and workpiece axis: 100/1,200 mm Maximum axial slide travel (custom version): 1,300 mm --> Maximum Clamping Capacity for Cutter (Internal Milling Head): Maximum diameter: 440 mm Maximum cutter width: 90 mm Swivel range of internal profile milling head / vertical axis: +/- 15° Cutter arbor taper: HSK-B160 Maximum cutter shifting travel: 300 mm Table diameter: 2,500 mm Indexing gear diameter: 2,200 mm --> Table Bore: Diameter: 800 mm Depth: 875 mm Maximum table load approx.: 40,000 kg --> Max. Feed and Rapid Traverse Rates: Axial (Z-axis): 4,000 mm/min Radial (X-axis): 3,000 mm/min Tangential (Y-axis): 3,000 mm/min --> Cutter Coolant System/Electrocentrifugal Pump: approx. 150 l/min Discharge height, magnetic chip conveyor raised: 1,600 mm Raised main column: 1,300 mm axial slide travel --> Internal profile milling head as motor-driven milling head in place of standard motor-driven head --> Max. profile depth machinable in steel (approx. 600 N/mm² tensile strength): approx. 65 mm Cutter speed infinitely variable: 50 - 150 rpm Max. cutter diameter: 440 mm Min. cutter root diameter: 310 mm Max. cutter width: 90 mm Min. internal diameter at 0° helix angle: 800 mm+ Max. workpiece height at 0° helix angle: 600 mm Max. workpiece ring thickness (incl. clamping device): 500 mm

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, CNC Plate-Type Horizontal Boring Mill – Ram with Rotary Slide Table Manufacturer: SKODA / Model: W200 Base Machine Year: 1986 / Retrofit to CNC in 1999 by SKODA The machine can be inspected by appointment. Ffedpfx Aewxyxqsc How Technical Specifications: Travel ranges: X-axis: 8,000 mm Y-axis: 4,150 mm W-axis: 2,000 mm Z-axis: 1,600 mm Spindle: - Spindle diameter: 200 mm - Tool taper: DIN 2080 AD, ISO 60 - Spindle speed: 0.0 - 930 rpm - Spindle drive power: 77 kW Boring Mill / Rotary Slide Table: - Make: SCHARMANN - Table clamping surface: 6,000 x 4,000 mm - V-axis: 2,000 mm - Maximum table load: 80 t - B-axis: 360°, indexing: 0.001° Accessories: - CNC control: SIEMENS Sinumerik 840 CE - Chip conveyor - ... No guarantee for completeness or accuracy of the technical data and equipment details. Subject to prior sale. A detailed technical data sheet and equipment information are available on request.

Būklė: naudotas, Gamybos metai: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Space requirement approx.: m DISKUS Vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of construction: 1969 Serial no.: 6672 --- Grinding wheels - diameter x bore per side: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc outside Ø: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Vertical quill adjustment per side: approx. 150 mm Hydraulic infeed pulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed per side: (24 m/s) / 765 rpm Grinding spindle drive per side: 22 kW each Total drive: approx. 50 kW/380 V/50 Hz Total weight: approx. 7,000 kg Accessories / Special Equipment: • Workpiece rotary device for round transport discs with apertures for inserting the parts and with automatic ejection of finished parts down a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height and, if necessary, with automatic hydraulic grinding wheel infeed. • Stepless speed regulation of the rotary device according to grinding dimensions and workpiece. • Manual infeed of grinding wheels via corresponding buttons. • hydraulically swivelling dressing device (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and with automatic repositioning to effective workpiece thickness after dressing = high time savings, can be triggered manually or by timer. • Ammeter displays for both grinding spindle drives. * Central lubrication, • Mechanical height control of workpieces with machine shutdown if overheight is detected. • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is especially suitable for simultaneous, plane-parallel grinding of workpieces in large series. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Fjdst Hw N Hepfx Ac Hjfw

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing Fjdpfx Aet Hww Djc Hefw • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice