MOBILUS MONTAVIMO MALŪNAS

TOS KUŘIM Fraiseuse TOS FFQ 100 KR/A 14

Sąlyga: naudotas, Gamybos metai: 2006, X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control unit: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm Hfsdpjv Az Ucjfx Af Ijb T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front milling spindle bearing diameter: 70 mm Rapid traverse (X/Y/Z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Fine feed rate: 15 steps / 0 - 1,260 mm/min Magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter (adjacent slots empty): 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool change time: 1.0 sec Total power requirement: 34 kVA Machine weight: approx. 7.2 t Footprint: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 400 mm, Y ašies eiga: 2 850 mm, Z ašies eigos atstumas: 1 000 mm, padavimo ilgis X ašis: 20 000 mm, padavimo eiga Y ašimi: 30 000 mm, padavimo ilgis Z ašis: 20 000 mm, Droop & Rein Modimill, année de construction 2001, commande Fidia C20 Hodpfx Afsvk Ubxe Iofb

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 10 000 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 105 mm, tekėjimo skersmuo: 610 mm, veleno greitis (maks.): 3 500 aps./min, veleno skylė: 70 mm, X ašies eiga: 580 mm, Y ašies eiga: 210 mm, Z ašies eigos atstumas: 1 137 mm, tvirtinimo skersmuo: 63 mm, sukimosi greitis (maks.): 6 000 aps./min, įvesties srovės tipas: Oro kondicionierius, Įranga: sūkių greitis be galo kintamas, The machine is in good condition. Major maintenance work in recent years: 30.04.2020 Milling spindle overhaul CHF 35,000 16.07.2021 Software update (Wenk AG) CHF 1,600 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: ·Error message at startup ·Coolant for internal cooling flows out at the rear side of the milling spindle ·Overload message when the machine is cold and rapid traverse is at 100% ·Over 150 various tool holders ·Spare bushings for the tool magazine ·Spare limit switches for the tool changer position monitoring ·2 pieces 3-jaw chuck, diameter 250 mm (mounted during inspection) ·1 piece 3-jaw chuck, diameter 250 mm ·1 piece 3-jaw chuck, diameter 300 mm ·1 piece 4-jaw chuck, diameter 400 mm ·2 sets hard jaws for external clamping, short version ·1 set hard jaws for external clamping, long version ·Various sets of soft jaws, used ·Replacement filters for the Kowap high-pressure unit (5 pieces in stock, approx. 2 pieces by delivery – 1 filter approx. 20-25 CHF) ·Coolant purification system or oil separator (custom-made) ·Cabinet suitable for the tool magazine, adapted for KM63 holders and numbered with 80 slots ·Specific clamping accessories suitable for KM63 holders, which allow direct clamping of indexable inserts ·Iscar side milling cutter suitable for one holder, D160mm, width 4mm ·Gear cutter suitable for one holder (custom-made – for soft jaws p=1.5mm) ·Cleaning/deburring brush suitable for one holder Hjdsxp Hmaspfx Af Iefb We can also provide you with leasing and financing offers for the machine. An inspection appointment can be arranged upon request.

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 124, Kaina pagal užklausimą Hsdpfswl An Iex Af Iofb Naudotas CNC vertikalus tekinimo staklės Gamintojas: MORI SEIKI Modelis: VL 55 Pagaminimo metai: 2001 Su CNC valdymu MSC 518, 12 pozicijų revolverine galvute ir drožlių transporteriu Tekinimo ilgis = 653 mm Tekinimo skersmuo = 550 mm X ašis = 350 mm Z ašis = 660 mm Sukimosi greitis iki = 2000 aps./min. Veleno galia = 30 kW Svoris apie = 12,5 t

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 610 mm, nominali (akivaizdi) galia: 37 kVA, sukimo momentas: 236 Nm, valdiklių gamintojas: Heidenhain iTNC530, valdiklio modelis: iTNC530, stalo plotis: 700 mm, stalo ilgis: 1 700 mm, stalo apkrova: 700 kg, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 9 000 kg, veleno greitis (maks.): 12 000 aps./min, veleno veikimo valandos: 16 580 h, ašies variklio galia: 37 W, ašies skaičius: 1, įrankių magazino lizdų skaičius: 48, Įranga: dokumentacija / vadovas, drožlių transporteris, 3-axis CNC machining center Heidenhain iTNC530 X travel: 1500 mm Y travel: 700 mm Z travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 tools Rapid traverse: 36 m/min Table load capacity: 700 kg Hfjdpfx Afjvz Tyuo Ijb Through-spindle coolant: 20 bar Chip conveyor Handwheel

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool magazine capacity: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19,700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes 2-station pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Hjdpfsvnd Susx Af Ijfb

Gamybos metai: 1990, Sąlyga: geras (naudotas), CNC 4th Axis Hfodogabu Ujpfx Af Isb Manufacturer: NIKKEN Model: CNC-200, Year: 1990 Including tailstock and base plate.

Sąlyga: naudotas, Gamybos metai: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle/table (vertical): 1,230 mm Clamping surface (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, rotary table type with turntable, for 32 tool positions Chip conveyors: 2 hinge belt conveyors, manufacturer DGS, with water tank, insertion length 8,500 mm Make BKW, type DL 55V-2KK, capacity 2.41 l/min; Hsdeu Nc Emopfx Af Iofb Combined oil-water cooling unit for hydraulic oil and spindle cooling Coolant system: Band filter, manufacturer DGS, type SBF 150 Operation: via control console, type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld control unit: HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective panels with viewing windows and safety doors) Hydraulic unit Work area lighting

Sąlyga: paruoštas naudoti (naudotas), Travel distances X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm–0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Hfedeuqackjpfx Af Ieb

Sąlyga: naudotas, Gamybos metai: 2001, x-axis travel: 2050 mm y-axis travel: 1100 mm z-axis travel: 800 mm Control: Fanuc 18iM Super Cap II Spindle speed: 60-6000 rpm Hfedpfjrw Dknox Af Ieb Tool magazine: 60 positions Tool holder: BT50 Total power requirement: 26 kW Machine weight approx. 23.6 t Space requirement approx. 6.3 x 3.3 x 3.8 m The machine will be available for loading from 03/2024! Description X-axis: 2050 mm, Y-axis: 1100 mm, Z-axis: 800 mm, Spindle speed: 60-6000 rpm, Number of tool stations: 60, Tool magazine: BT 50, Drive power: 22/26 kW, Table pitch: 250 mm, Control: FANUC 18iM Super CAP II with 10.4-inch display, Length: 6250 mm, Width: 3300 mm, Height: 3800 mm, Weight: 25 t, with High Precision Contour Control, Central lubrication extension (2005), axis upgrade (X-Y-Z) to linear scales (0.001 mm), Memory expansion 128 KB, tool compensation memory (200 pcs), High Speed Remote Buffer, Extraction via HEPA filter system, upgrade to high-pressure internal coolant supply 20 bar, and zero-point clamping system with 16 pots each.