Cilindrinė šlifavimo mašina

TOS Hostivař 1U

Sąlyga: naudotas, Diameter various. Quantity 56x. Holder BT 40. Rbodpowtrzyofx Ah Hjt

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, bendras ilgis: 620 mm, Mechanics: All wear parts of the machine are replaced, including the feed spindle on the X-axis. All assemblies are restored to a like-new condition. After the overhaul, the machine is comparable to a new unit. Geometry: Rbjdourw Uyepfx Ah Hjt The machine is completely disassembled down to the guideways. Before the geometry of each table and assembly is restored, both the X and Z-axis guideways are hand-scraped and restored to like-new condition. Upon completion, the machine receives a measurement protocol according to the manufacturer's specifications. Painting: After the machine's geometry is restored, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also fully overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Specifications: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine Weight and Dimensions: 2,500 kg // 2340 x 1445 x 1900 mm Machine Equipment (Standard): 1x Workpiece headstock MK5 1x Operator panel 1x Mount for internal grinding spindle 1x Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1x Hydraulic unit Optional: - 2-axis digital readout system - Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds possible upon clarification of technical details) - Separate low speed for part alignment

Sąlyga: naudotas, Gamybos metai: 1969, Grinding length 500 mm Grinding width 200 mm Workpiece height 250 mm Total required power 5.5 kW Machine weight approx. 2500 kg Space requirements approx. m J U N G Horizontal Precision Surface and Profile Grinding Machine Model HF 50 RD Year of manufacture approx. 1969 Machine No. 4082 _____ Maximum grinding length 500 mm Maximum grinding width 200 mm Table size 600 x 200 mm Table speed 1 – 20 m/min Working height under grinding wheel approx. 350 mm Grinding wheel size 225 x 25 x 51 mm Grinding wheel speed, infinitely variable 1,000 - 4,500 rpm Vertical infeed 0.001 - 0.01 mm/stroke Grinding spindle drive, continuously adjustable 0.5 to 1.5 kW Total drive power approx. 6 kW - 380 V – 50 Hz Weight approx. 2,500 kg Accessories / Special Equipment • This version, due to the infinitely variable speed range, is particularly suitable for grinding high-alloy tool steels. • Automatic infeed of the grinding carriage for surface and profile grinding operations with automatic infeed shut-off via dial indicator, as well as with dial indicator holder and dial indicator for height control. • Machine can be set for standard grinding operations with and without infeed, either with continuous cross movement or with table reversal, or for plunge grinding operations without cross adjustment. • Manual straight dresser mounted above the grinding wheel • Mounted permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separately standing wet grinding unit with coolant tank and belt filter • Separate converter cabinet for infinitely variable speed regulation and display of cutting speed. Rbedpfx Ast Hwzijh Hjt • Approx. 3 flanges with and without grinding wheels, rapid grinding head traverse, Condition : good – ready for demonstration under power, partially overhauled by specialized company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. Redpfx Ahsqt Dmye Hebt When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Sąlyga: naudotas, TECHNICAL DATA - Number of Axes: 5 MILLING SPINDLE - Tool Holder: HSK63 - Spindle Drive Power: 17.5 kW Rsdpfx Aeup Hwxjh Hobt - Spindle Speed: 18,000 rpm LINEAR AXES - Travel (X/Y/Z axes): 915 / 500 / 500 mm - Rapid Traverse Speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of Tools in Magazine: 28 TABLE - Table Size: Ø 630 mm - Max. Table Load: 500 kg ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Power Consumption: 26 kVA WEIGHT AND DIMENSIONS - Footprint: 3620 x 3160 mm - Machine Height: 3000 mm - Machine Weight: 7,300 kg MACHINE HOURS - Operating Hours: 50,223 h EQUIPMENT - Control: Heidenhain iTNC 530 - Coolant Tank - Chip Conveyor - Oil Mist Extractor: ELBARON - Coolant Unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece Probing System: Renishaw - Tool Breakage Monitoring: BLUM

Sąlyga: naujas, The RSM 500 A is a conventional cylindrical grinding machine from the grinding machines category, distinguished by its robust construction and long, supported guideways. Its heavy machine bed made of high-quality cast iron ensures maximum stability and precise grinding results. The swiveling table and finely adjustable hydraulic feed guarantee smooth operation, while large graduated dials on the X-axis handwheel facilitate accurate infeed. This setup is complemented by a standard position indicator with linear scales, allowing for straightforward monitoring of actual values. The machine’s versatility for internal and external cylindrical grinding, as well as taper grinding, is further enhanced by the hydraulically adjustable workhead. Buyers receive a comprehensive set of standard accessories, including an internal grinding attachment and a work lamp. Experience superior performance and precision with the RSM 500 A – request a quote now to optimize your grinding projects! Rbjdpjncdx Njfx Ah Hjt

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8292, šlifavimo ilgis: 3 100 mm, bendras plotis: 1 500 mm, bendras ilgis: 5 100 mm, bendras aukštis: 1 800 mm, šlifavimo plotis: 200 mm, įvesties srovės tipas: trifazis, ruošinio svoris (maks.): 1 000 kg, įėjimo įtampa: 400 V, šlifavimo veleno greitis: 1 800 aps./min, aušinimo siurblio galia: 100 W, šlifavimo veleno variklio galia: 1 100 W, bendras svoris: 2 500 kg, šlifavimo disko skersmuo: 200 mm, šlifavimo ratuko plotis: 20 mm, stalo aukštis: 200 mm, stalo ilgis: 3 100 mm, stalo plotis: 200 mm, valdymo spintos plotis: 400 mm, valdymo spintos ilgis: 1 200 mm, valdymo spintos aukštis: 1 500 mm, Nauja mašina, vis dar originalioje pakuotėje! Rjdpfxox Ezu To Ah Hebt

Sąlyga: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Milling head - swiveling 120° Cutter speeds 70 - 400 rpm Rodpfx Ahsvzhf Sj Hjbt Axial feed rates 0.25 - 4.0 mm/rev Radial feed rates 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Control: ELB-PLC Grinding Area: Length X 1000 mm Width Z 750 mm Height Y 400 mm Magnetic Chuck 1000 x 700 mm Table Load Capacity: (without magnetic plate) 1100 kg Longitudinal Axis X: Table speed 2–26 m/min Maximum longitudinal stroke 1100 mm Vertical Axis Y: Rsdpfx Ahevwl Ipj Hsbt Vertical stroke 400 mm Maximum feed rate 1200 mm/min Minimum vertical infeed 0.001 mm Cross Axis Z: Maximum cross stroke 620 mm Maximum feed rate 2000 mm/min Minimum cross infeed 0.001 mm Grinding Spindle: Taper 75 mm Drive power 22 kW Speed range 1450 rpm Grinding Wheel Dimensions 450 x 150 x 203.2 mm Machine Footprint (without control panel) LxWxH 3550 x 2750 x 3230 mm Total Machine Weight 7300 kg

Sąlyga: naudotas, Gamybos metai: 1994, Swing diameter: 570 mm Turning length: 2000 mm Control system: Sinumerik 805 Siemens Max. swing diameter over cross slide: 365 mm Rbedpfx Ahju Sbkgo Hot Main spindle speed range: 3–2,500 rpm Main spindle drive power: 15/19 kW Spindle bore: 62 mm Spindle nose: DIN 55027 No. 8 Tailstock taper: MK 5 Quill stroke: 190 mm Quill diameter: 80 mm Feed range – longitudinal and cross: 0.01–50 mm/rev Total connected load: 50 kVA Machine weight: approx. 5 t Space requirements: approx. ___ m Includes Forkardt chuck F315 Includes 6 Multifix tool holders Includes 1 closed steady rest Includes 1 open steady rest