NAUDOTAS CNC TEKINIMO STAKLĖS, GAMINTOJAS TORNOS-BECHLER, MODELIS DECO 2000 7/10

TORNOS-BECHLER DECO 2000-7/10

Būklė: naudotas, Gamybos metai: 1977, Viršūnių aukštis: 200 mm Viršūnių atstumas: 1 000 mm Veleno sūkių skaičius: 1 600 aps./min Veleno skylė: 42 mm Sūkio ilgis: 1 600 mm Sūkio skersmuo virš staklių guolio: 410 mm Sūkio skersmuo virš skersinio vežimo: 230 mm Staklių svoris: apie 1 700 kg Fsdpfx Aneyv N Rko Hopn Išmatavimai: 2 000 × 1 000 × 1 500 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 1986, Šlifavimo ilgis 800 mm Šlifavimo plotis 375 mm Ruoinio aukštis 375 mm Elektrinė magnetinė tvirtinimo plokštė 900 x 300 mm Veleno apsisukimų dažnis 1500 - 3000 aps./min. Stalo tvirtinimo paviršius 1550 x 370 mm Stalo išilginė eiga 100 - 1000 mm Maks. ruoinio svoris 350 kg Šlifavimo disko matmenys 300 x 50 mm Fpsdpfx Aeunt Iujn Hon Bendras galingumo poreikis 9 kW Staklių svoris apie 4,6 t Reikalinga vieta apie 4,0 x 2,3 x 2,6 m Šlapio šlifavimo įranga, automatinis vertikalus padavimas. Persijungiama giluminis ar plokštuminis šlifavimas. Elektrinis tiesinis nulyginimo įrenginys Elektrinė magnetinė tvirtinimo plokštė 900 x 300

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 630 mm, veleno skylė: 320 mm, tekėjimo skersmuo: 1 200 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, tekėjimo ilgis: 3 000 mm, Lathe in very good technical condition; it has seen very little use and was not utilized for pipe machining. The Poręba TPL 90/3m lathe (commonly listed in the market as a TPK 90 series variant) is a textbook example of an oil country lathe (Hollow Spindle Lathe). This model meets all specific criteria for machines intended for the Oil & Gas sector. • Large Spindle Bore: Machines in this version feature a spindle bore diameter of 320 mm (approx. 12.5 inches), which allows thick-walled drill and casing pipes to pass freely through the spindle. • Dual Chuck System: The headstock design allows the installation of two independent lathe chucks (front and rear, typically 28" diameter), which clamp and stabilize the pipe at both spindle ends. • Optimal Working Dimensions: The '3m' designation defines the between-centers turning length (3000 mm), combined with a swing over bed diameter of 930 mm (hence the '90' in the name), enabling machining of massive pipeline components. • Extreme Rigidity: FUM POREBA machines are renowned for their monolithic, very wide, and heavy cast iron beds, effectively damping the huge vibrations arising during taper thread turning. In international used machinery listings, this particular Poręba model is classified directly under the 'Oil Field Lathes' category. TECHNICAL DATA: Geometric parameters and machining ranges: • Swing over bed: 930 mm / 36.6" • Swing over cross slide: 630 mm / 24.8" • Swing over gap: 1200 mm / 47.2" • Maximum turning length between centers: 3000 mm / 120" • Bed width: 585 mm / 23.0" Headstock: • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6" (classified in US nomenclature as 12.5") • Spindle speed range: 5 – 250 rpm or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and threading system: • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Thread types cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock: Fodpfx Aey Sf Azon Hepn • Tailstock quill diameter: 130 mm / 5.1" • Tailstock quill stroke: 300 mm / 11.8" • Quill internal taper: Morse No. 6 (MT6) Drive and machine dimensions: • Main motor power: 22 kW / 29.5 HP • Overall machine length: approx. 5500 mm / 216.5" • Overall machine width: approx. 1750 mm / 68.9" • Overall machine height: approx. 1500 mm / 59.0" • Total machine weight: approx. 8000 kg / 17,630 lbs

Būklė: geras (naudotas), Gamybos metai: 1999, Visi papildomi įrenginiai, matomi nuotraukose, bus komplektuojami. Fpodpfxsww Irie An Hon Techninės detalės pateiktos nuotraukoje.

Būklė: geras (naudotas), Gamybos metai: 1995, Description Control: Sinumerik 810M Spindle speed: 5000 rpm 12-position turret Table clamping surface: length 850 mm, width 325 mm Very good condition, regularly maintained. Operating manual in German Number of axes: 3 (X, Y, Z) Fodpovt Amuefx An Hopn Travel X: 420 mm, Y: 330 mm, Z: 240 mm Control system: Sinumerik 810M Max. spindle speed: 5000 rpm Automatic tool changer for 12 tools Tool holder: SK40 Coolant system

Būklė: naudotas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Minimum C-axis resolution: 0.1 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] - Number of tool holders: 2 TOOL HOLDER 1 - Number of stations: 5 TOOL HOLDER 2 - Number of stations: 5 - Number of driven stations: 4 - Driven tool speed: 8,000 [rpm] SECONDARY MACHINING UNIT - Number of stations: 7 - Number of driven stations: 3 - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 14 [kW] WEIGHT AND DIMENSIONS - Footprint: 2270 x 1650 [mm] Fpodpfx Ansuhayco Hon - Machine height: 2200 [mm] - Machine weight: 3,500 [kg] MACHINE HOURS - Power-on hours: 46,571 [h] EQUIPMENT - Control: Fanuc - Driven tool motorization on: S2 - Driven guide bushing - Parts catcher - Parts ejector - Swarf conveyor: KNOLL - Coolant tank * with high-pressure pump: 100 [bar] - Bar feeder: TORNOS ROBOBAR SSF - Oil mist extraction: Elbaron - Fire extinguishing system * * NB: Functionality not guaranteed. To be checked by the buyer's qualified company.

Būklė: geras (naudotas), Gamybos metai: 1970, Ref. Nr.: 10575 Gamintojas: VDF BOEHRINGER Tipas: T 11 Pagaminimo metai: 1970 Valdymo tipas: Konvencinis Valdymas: nėra Sandėliavimo vieta: Halberstadt Kilmės šalis: Vokietija Mašinos Nr.: 40XXX Sukimosi skersmuo: Ø 700 mm Sukimosi ilgis: 3000 mm Fpedpfexmd Uvox An Hen Velenu skersmuo: Ø 750 mm Velenu skylė: 70 mm Apsisukimo skersmuo virš planšlaito: Ø 450 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool posts: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotary spindles: X3Z3, S3 Fpjdpjw T Tcwsfx An Hen - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating axis for back-working: X4, S5 Bar feeder position: on operator's right Machine center height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. part length: - guide bush machining: 180 mm - collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous), 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous), 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotary Collet for guide bush, type: Meister 605 Number of side tool holders, combined - fixed: 2 x 5 - rotary: 3 + 3 Number of front tool holders, combined - fixed: 4 - rotary: 3 Number of rear tool holders, combined - fixed: 3 + 3 - rotary: 3+3 Tool section: 12x12 mm Standard rotary tool holder: ESX 20 Bar feeder: yes Parts catcher: yes All technical data subject to change without notice, errors and omissions excepted.

Gamybos metai: 1993, būklė: paruoštas naudoti (naudotas), Centų aukštis: 280 mm, atstumas tarp centrų: 2000 mm, tekinimo skersmuo virš lovio/slankiklio: 570 mm/365 mm, veleno anga: 62 mm, apsukos: 2500 aps./min., didžiausias ruošinio svoris: 1000 kg, lovos plotis: 360 mm. Staklių matmenys X/Y/Z: apie 4000 mm/2250 mm/2000 mm, svoris: apie 5500 kg, valdymas: Siemens. Galima apžiūra vietoje. Fpsdpexq Eyujfx An Hon

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 70.0961.000.253, TECHNISCHE DATEN: Umlaufdurchmesser: - Über Bett: 800 mm - Über Support: 560 mm - Planscheibendurchmesser: 750 mm Spitzenhöhe: - Über Flachbahnen: 380 mm - Über Prismenbahnen: 358 mm Bett, Lünette und Ausnehmung: - Drehdurchmesser im Bettbereich: 980 mm - Breite der Ausnehmung vor der Planscheibe: 380 mm - Schwenkbereich in der Ausnehmung: 1040 mm - Breite der Ausnehmung vor der Planscheibe im Schwenkdurchmesser: 330 mm - Bettbreite: 560 mm Spindelstock: Fpodpfsup A Rzex An Hon - Spindelbohrungsdurchmesser: 90 mm - Spindeldurchmesser im vorderen Lager: 145 mm - Spindelkonus: MK 6 Spindeldrehzahlen: - Anzahl: 18 - Drehzahlbereiche: 7,1 - 355 min⁻¹ 9,0 - 450 min⁻¹ 11,2 - 560 min⁻¹ Erforderliche Leistung: 7,5 - 14 kW Vorschübe: - Anzahl: 32 - Längsvorschübe pro Umdrehung: 32 Längsvorschübe: 0,071 - 2,5 mm/U 32 Quervorschübe: 0,04 - 1,4 mm/U Extras: Zusatzausrüstung, Maschinenhandbücher