Sriegimo voleliai UPWS 25

Thread rolling machine UPWS 25

Būklė: naudotas, LOSER MODEL AA220 DOWEL TRIMMER / TENON CUTTER - USED - Capacity: 7500/1500 dowels per hour - Dowel diameter capacity: 6-18 mm Fjdpfoqpdkcjx Afqspl

Būklė: naudotas, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] Fsdpfouhb Uhjx Afqspl - Dimensions: 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock device - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Fedpfx Afeuz If Nsqepl Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Būklė: naudotas, Gamybos metai: 1991, Workpiece diameter: 30 mm Thread length: 110 mm Thread pitch: 0.5–2.75 mm/rev Total power requirement: 4.5 kW Machine weight: approx. 1.7 t Space requirement: approx. [dimension missing] m MONNIER & ZAHNER Switzerland Thread Whirling Machine with Automatic Workpiece Loading System Fpsdpfst Hwzcex Afqol Type MZ 600, Year of Manufacture approx. 1991, #3591 _____ Max. workpiece Ø: approx. 30 mm Max. workpiece length: approx. 110 mm Axial milling length: approx. 100 mm Module in steel: approx. 1 Worm leads: 1 Axis distance tool-workpiece min./max.: 0–70 mm Whirling head swiveling: ±12° Tool size approx.: 70 x 16 mm Whirling head speeds approx.: 1,000–6,000 rpm Pitch range approx.: 0.5–2.75 mm/rev Whirling head drive: approx. 1.5 kW Total drive: approx. 4.5 kW – 220 V/380 V / 50Hz Weight: approx. 1,700 kg Accessories / Special equipment: The machine is used for the production of medical screws and is equipped with an automatic workpiece feeder via a Rübenach vibrating bowl with pneumatic swivel gripper for introducing blanks, as well as a counterpoint (pusher) and with ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as both a longitudinal and cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew, the cross slide determines the thread depth. Copying device at the end of the cross slide with template holder for conical screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electronic program control with display for motion sequence monitoring. Fault indication, piece counter, oil mist extraction, coolant system, etc.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1028, Sriegių volavimo staklės LEISTRITZ RT 400-CCA Pagaminimo metai: 2004 / Modernizuota valdymo sistema 2019 Maitinimo įtampa: 3x400 V Fodpfx Afexytmhjqjpl Dažnis: 50 Hz Nominali galia: 65 kW Maitinimo saugiklis: 125 A Darbinis slėgis: oras: 6 bar; alyva: 270 bar Valdymo įtampa: 24 V nuolatinė srovė Maksimalus veleno ilgis: 275 mm Minimalus veleno ilgis: 125 mm Maksimalus volų rinkinio skersmuo: Įrankis Ø69,85 – 215 mm, Įrankis Ø80 – 210 mm Minimalus volų rinkinio skersmuo: Įrankis Ø69,85 – 176-178 mm, Įrankis Ø80 – 176 mm Didžiausia valcavimo jėga: 40 t Užimamas plotas: 3,4 m x 2,9 m x 2,2 m Svoris: 4900 kg Priedai: - Aušinimo skysčio filtravimo sistema - Antroji velenų pora (1x Ø69,85 mm įrankiams, 1x Ø80 mm įrankiams)

Būklė: naudotas, STAR SB-20R tipo N yra CNC ilginių tekinimo staklės (CNC Swiss), skirtos itin tiksliam, patikimam ir preciziškam apdirbimui. Galimybės: išorinis skersmuo maks. 20 mm, gręžimo skersmuo maks. 10 mm, sriegis maks. 8 M; iš viso 5 ašys, C ašies rezoliucija 0.001°. Techniniai duomenys: veleno apsukos be pakopų 500–10000 aps./min., greitas judėjimas 35 m/min, veleno variklis 2,2/3,7 kW, bendra galia 3,7 kVA, prijungimas 50 Hz 3x 400 V, svoris ≈1800 kg, matmenys L2070 × P1770 × A1760 mm. Priedai: C ašis, detalių transporterio juosta, drožlių transporterio konvejeris, aušinimo įranga, RS232 ir USB sąsajos. Pasiekia griežtas tolerancijas; tinka automobilių, laikrodžių, įrankių gamybai, aviacijai ir medicinai. Fedpfx Afjyxnztoqspl

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Strypo skersmens diapazonas: 5,0 - 30,0 mm Strypo ilgiai: 100 - 1 000 mm Našumas: maks. 60 strypų/min Fpedpfx Afsylb Hzoqol

Būklė: naudotas, Gamybos metai: 1986, bendras svoris: 6 500 kg, galia: 42 kW (57,10 AG), įėjimo įtampa: 380 V, brošavimo ilgis: 1 600 mm, brochavimo pozicijų skaičius: 1, ruošinio skersmuo (maks.): 500 mm, Manufacturer: Varinelli Milano Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500 kg Machine No.: 3269 General / Technical Data: Vertical hydraulic internal broaching machine with a single broaching station Pulling force: 25,000 kg Broaching stroke: 1,600 mm Broaching stations: 1 unit! Passage width between cylinders: max. 540 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 8 m/min Return speed: hydraulically infinitely variable up to max. 18 m/min Space requirement of the machine: see machine layout diagram Power supply / Connected load: 380 Volt 50 Hz / 42 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is fitted with a spring-actuated locking mechanism (DIN 1417) in the pull bridge. The tool feed system is hydraulically and mechanically locked. The machine features a coolant system with integrated chip conveyor, designed for installation in a pit. Remarks: The machine still has its original paint. It is designed for series production of medium and large batch sizes. For optimal use, a foundation (pit) is ideally required. Pull heads and needle ejectors are available on request. The machine can be inspected at our warehouse. General Information Fpodpfxowqmaxe Afqjl We always have a large selection of approximately 80 used broaching machines with pulling forces ranging from 3,000 kg to 63,000 kg, available in both horizontal and vertical versions in stock. A large number of the broaching machines in stock are available for demonstration. If required, we can also offer you used equipment such as pull heads, needle ejectors, broaching tools and further specific accessories. As a contract broaching specialist with over 50 years of experience in broaching technology, we are also glad to assist you with technical questions.

Būklė: naudotas, Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D32L/7864, Pasiūlymo numeris: D32L/7864 Mašinos tipas: Spyruoklių vyniojimo mašina Informacija: atnaujinta Gamintojas: WAFIOS Tipas: FUL8 Fpjdpfxswi S Eko Afqol Pagaminimo metai: 1982/2000 Vielos skersmuo: 2,0-9,0 mm Spyruoklės skersmuo: 10-120 mm Įtraukimo ilgis: neribotas Našumas - vnt/min: 90 Vieta: Mūsų sandėlyje

Būklė: naudotas, Gamybos metai: 1996, Core drilling diameter – max. 25 mm Drilling depth 1000 mm Swing diameter mm Total power requirement 25 kW Machine weight approx. 12.5 t Space required approx. m T B T CNC-controlled horizontal "deep drilling machine" Type BWP 250 Year of manufacture: 1996; mechanically and electrically overhauled in 2006 _____ Working area: X-axis = drilling slide column approx. 2,000 mm Z-axis = drilling slide stroke approx. 1,200 mm Drilling depth with 2 steady rests approx. 1,000 mm Y-axis = drilling slide vertical approx. 1,100 mm Table clamping surface 1,200 x 2,000 mm Drilling capacity – Ø solid material approx. 4 – 25 mm Tool holder: HSK 50 Spindle speeds: 1,260 – 15,000 rpm Feeds/rapid traverse for Z/X/Y axes: infinitely adjustable 100 – 10,000/15,000 mm/min Feed drive capacity 27 Nm / 1000 daN Spindle drive power 7 kW Total drive approx. 30 kW – 400 V – 50 Hz Weight approx. 10,000 kg Accessories / Special equipment: • Ideal machine for complete machining of larger workpieces, tool forms and plates, etc., with deep hole drilling Ø 25 x 1,000 depth, milling up to Ø 65, slot milling up to Ø 30, spiral drilling/boring up to Ø 30, countersinking and thread tapping up to M 24 x 3. • SIEMENS 840 D 4-axis CNC path control with process monitoring, etc. • High-frequency drilling spindle, manufacturer GAMFIOR, with stepless spindle speeds. • Pneumatically adjustable (200 mm) drill bush carrier, swivels in two positions. • Fixed 12-position tool changer, manufacturer MIKSCH, type CTM 40 with 800 mm stroke for holding twist drills, milling cutters and thread taps; changeover from ELB deep hole drills to standard tools occurs manually. • Fixed table for handling heavy workpieces and achieving precise drilling. • Mounted on the table: FIBRO CNC rotary indexing table Type RTN 400 = 420x420 as B-axis • For the table: hydraulic FIBRO rotary indexing table Ø 1,000 mm for divisions of 3 – 144 or angles 2.5 – 120° • Large coolant system approx. 11 kW pump with scraper conveyor and various filters • 2 steady rests to support deep hole drill shafts • Complete machining enclosure with side and frontal access. Condition: Very good – a truly rare opportunity, can be demonstrated under power shortly Delivery: Ex-stock, here Payment: net – upon receipt of invoice Fedpfxet Hw Ayo Afqjpl We look forward to receiving your order. If you have any further questions, please do not hesitate to contact us.