Analizės lentelės spektrometras su OXSAS 2.7

Thermo Fisher Scientific ARL easySpark Metallanalysator, Software

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, CNC Twin-Spindle Turning Center Control: CNC path control incl. 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G TECHNICAL DATA Maximum turning diameter: 340 mm Spindle distance: 1470 mm Turning length: 1135 mm Swing diameter over bed: 700 mm Swing diameter up to tool turret 2: 540 mm Travel paths: X1 – Tool turret I: 270 mm Y1 – Tool turret I: 120 mm Z1 – Tool turret I: 1200 mm X2 – Tool turret II: 195 mm Y2 – Tool turret II: 80 mm Z2 – Tool turret II: 1200 mm X3 – Counter-spindle slide: 180 mm Z3 – Counter-spindle slide: 1200 mm Main Spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle): 40/48 kW Torque (100/40% duty cycle): 570/680 Nm Speed range: 0-4000 rpm Bar diameter: 102 mm Draw tube inner diameter: 104 mm C-axis and spindle brake (angular resolution): 0.001° Counter Spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle): 25/32 kW Torque (100/40% duty cycle): 280/380 Nm Speed range: 0-5000 rpm Bar diameter: 65/75 mm C-axis (angular resolution): 0.001° Slide 1 Tool turret (direct drive) Number of tools: 12 Tool holder diameter VDI (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 2 Tool turret (direct drive) Number of tools: 12 Tool holder diameter VDI (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 3 Rapid traverse speed X-/Z-axis: 30/45 m/min Tool resolution Z-axis: 0.001° Feed force (40% duty cycle) X-/Z-axis: 16/13 kN EQUIPMENT/ACCESSORIES  Short bar loader IRCO ILS-RBK 100/16  Various main spindle reduction tubes  NC-controlled workpiece unloader from both main and counter spindle The unit consists of NC-controlled * horizontal axis * swivel unit * vertical axis * 2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removing workpieces from the machine Gtodpjwcd S Nefx Abdot  Coolant system 8/20 bar with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°)  Counter-spindle slide  Easy-Tool Monitor  1 collet chuck for quick-change chuck size 100 for main spindle  1 collet chuck for quick-change chuck size 100, Nova AxisFix for counter spindle  Approx. 40 various quick-change chucks size 100 (total stock)  Change device, pneumatic ø 100 mm  Approx. 50 various tool holders, stationary and driven (total stock)  Mounting elements  Documentation

Sąlyga: naudotas, Gamybos metai: 2018, System: Decanter Model: Flottweg C4E-4/454 Complete Dewatering Unit in Container Year of manufacture: 2018 Sludge throughput: approx. 0-40 m³/h Solids capacity: max. 1.2 t DS/h Equipment: double doors on face side, side entrance door, fan heater, lighting, power sockets, etc. Bowl: max. rotational speed 3,650 rpm Bowl diameter: 470 mm System: Containerized unit with swap body system for integration of subsequent plant components. Fully piped and wired, operational as a functional unit. Container unit design: Frame construction, clad with sandwich panels and fittings for swap body system transport. Accessories: FHM PolyMix 4000SP polymer make-up station, measurement equipment, control panel Feed pump: Seepex BN 52-6LS Discharge conveyor: Double trough screw conveyor SS D320 Dimensions: L 7,820 mm x W 2,500 mm x H 3,880 mm Empty weight: 14,500 kg Operating weight: 15,000 kg Voltage: 400 V Gtsdpfju R Icmex Abdot Current consumption: 142 A Maximum power consumption: 70 kW Fuse protection: 250 A Frequency: 50 Hz Sludge inlet: DN 100 Centrate outlet: DN 200 Solids discharge: Screw conveyor Further information: see photos.

Sąlyga: naudotas, Gamybos metai: 2004, Pressure: 80 t Gtodpfxovuua Nj Abdet Stroke: 16 - 63 mm Stroke rate: 100 - 750 strokes/min Column gap: 970 mm Installation height (stroke + ram adjustment at top): 380 mm Lateral column opening: 380 mm Table dimensions: 940 x 910 mm Pass-through opening in the table: 770 x 190 mm Table height above floor: 1180 mm Ram surface: 940 x 510 mm Ram adjustment: 76 mm Material width: 203 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 37.0 kW Weight: 14.50 t Space requirement: approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation according to CE standards With infinitely variable three-phase drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil circulation lubrication Mechanical roller feed Bruderer BBV 205/120, driven via press main shaft/universal shaft Guethle CK cantilever brackets Optionally, a soundproof enclosure can be offered – price on request.

Sąlyga: labai geros būklės (naudotas), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring a newly developed electron optics system and intuitive graphical user interface (GUI) running on Microsoft Windows XP Professional. Device configuration includes the following features: - Magnification range: 5X – 300,000X - Accelerating voltage: 0.3 – 30 kV - Tungsten hairpin cathode (LaB6 cathode optional) - Large, fully motorized specimen stage with eccentric tilt function, including graphical navigation on the specimen holder - Simple specimen navigation via click-center-zoom - Image field-controlled navigation with 2 navigators - Relative coordinates navigation - Saving and recall of specimen positions - Adjustable image-framing method for the specimen stage - Image field correction during rotation via computer-controlled eccentric rotation - Image field correction during tilting via computer-controlled eccentric tilting - Calculation of possible tilt angle based on specimen geometry - Automatic focus tracking when moving the specimen in the Z-direction - Intelligent limit switches for the motorized axes Specimen stage travel: Gtedpfxjmn Rcqo Abdet x = 125 mm y = 100 mm z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) - Secondary electron detector for high-vacuum operation - Novel superconic objective lens guarantees maximum image resolution even at high tilt angles - Guaranteed resolution in SE image: 3 nm at 30 kV and 15 nm at 1 kV - Simultaneous live imaging from multiple detectors - Powerful image measurement functions - Movie function for recording dynamic processes - Versatile specimen chamber with numerous upgrade options: free flanges e.g. for EDX, WDX, EBSD, cathodoluminescence etc. - Low-maintenance and low-wear, quiet pumping system consisting of fore pump, vibration-free high-performance diffusion pump, and electromagnetic valve control - Comprehensive safety features against incorrect operation and external media failure - Ergonomic, height-adjustable system table - SEM starter kit comprising 2 specimen holders, tool kit, and 6 replacement cathodes Additional equipment for the scanning electron microscope: - Turbomolecular pump instead of the standard diffusion pump - When a turbomolecular pump is used, no cooling water is required for SEM operation Further SEM features: - PC for SEM control including TFT monitor - ΟΧ200 Bruker Quantax 200 EDX System EXTENDED - Bruker EDX software will be transferred to the new owner after purchase! Nitrogen-free energy-dispersive X-ray analysis system, including: - SDD detector with 127 eV or better energy resolution - Detection of all elements from boron upwards - Vibration-free, maintenance-free. Peltier-cooled (nitrogen-free) - Pulse processor - TFT monitor - Spectrum measurement and element identification - Fully automatic, quantitative, standardless element analysis - Image acquisition - Ultra-fast qualitative line scan - Ultra-fast qualitative element mapping - Data management and archiving system - Report generation and result output - Data communication - Installation and training HyperMap Multipoint analysis Bruker xFlash detector (SDD) with SVE III signal processing unit Scope of delivery: (see photos) Condition: used (Specifications may be subject to change or error!)

Sąlyga: naudotas, Gamybos metai: 2011, veikimo valandos: 26 920 h, IRB 6640-235/2.55 Gedpfx Aboim Si Asdjtt Year of manufacture: 2011 We are also pleased to offer this robot fully reconditioned upon request! For further information, please do not hesitate to contact us!

Sąlyga: geras (naudotas), Spectro CIROS CCD water analysis device - Height: 105 cm - Width: 150 cm - Depth: 75 cm Gedpfx Ajfiqn Ujbdstt Good condition, fully functional. The device can be inspected and tested on site. Shipping available internationally. Inspection: As a general note, to avoid misunderstandings, I recommend inspecting and testing the item under power before purchase. Please ask any questions prior to purchasing to avoid ambiguities. For general inquiries or to schedule an inspection appointment, I am always available via the phone number listed below. Subject to errors in the description and prior sale. VAT will be itemized separately on my invoices. Shipping by freight company.

Sąlyga: geras (naudotas), Gamybos metai: 2004, Clamping knife head type (max.): 460 mm Knife head weight (max.): 150 kg Mounting plate diameter for knife heads (Ø): 360 mm Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Travel distance - Z axis: 200 mm Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Space requirement approx.: 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: Gedpeul Efmjfx Abdjtt - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) - Simple assignment of measurement results to individual cutters - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Sąlyga: geras (naudotas), Various heavy-duty roller conveyors, suitable for use as casting or cooling lines, immediately ready for operation Gtedpsd Tx Ahjfx Abdjt

Gamybos metai: 2024, Sąlyga: naujas, The semi-automatic filler is the ideal solution for small businesses producing up to 5,000 Bag-in-Box units per year. The unit is equipped with an electromagnetic flow sensor, an electronic control panel for programming the filling volume (minimum 1 liter) and performing calibration, as well as a self-priming pump with rubber impeller EURO 20. At the start and end of the cycle, vacuum operation must be carried out by the operator, and nitrogen injection is managed via two manual pulse valves. Opening and closing of the tap is performed using the two standard stainless steel tools supplied. A drip collector buffer is included. The user selects the desired fill quantity and activates the switch to initiate the filling cycle. The filler executes a complete cycle: opening the valve / starting the pump / stopping the pump / closing the valve. • Touch screen operation for programming capacity and calibration • Digital flow meter max. 7,000 l/h • Stainless steel filling head • Pulse valve for manual nitrogen injection • Locking system for the filling head • Drip-free filling • Automatic start and stop • Dual semi-automatic system for connection opening and closing • Capability for filling flexible bags or pouches (tall or short type) from 1 liter capacity • S/S – Suitable for cleaning cycle (CIP) Godpfx Ajtpxtujbdett Technical Data: • Power supply: 220V 50-60 Hz • Suitable for: Ø 20 – 25 mm • Capacity: 5 L/h - 150 pcs • Capacity: 10 L/h - 100 pcs • Capacity: 20 L/h - 40 pcs

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Inlet opening: 620 x 350 mm Gjdpfx Abslgzrhjdjtt Rotor diameter x width: 1,060 x 610 mm Hard rock feed size: up to 180 mm Limestone feed size: up to 300 mm Complete with electric drive, discharge conveyor, and steel structure