Tekinimo staklių turas à repousse

TERMOZ sheet metal forming machine

Sąlyga: geras (naudotas), Gamybos metai: 1994, CNC Spiral-Biegemaschine, Kapazität 50 cm³, min.-max. Wickeldurchmesser 500–3.500 mm. Gtsdpoiu Acpjfx Aczst

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, - USADA - CURVADORA DE TUBOS EJES: 3 DIÁMETRO MÁXIMO DEL TUBO: 30 x 2 mm LONGITUD DE TRABAJO: 3.000 mm VELOCIDAD DE POSICIONAMIENTO EJE X: 900 mm/seg Gtodpfx Asvhc Uueczst VELOCIDAD DE CURVADO EJE Y: 200°/seg VELOCIDAD DE GIRO EJE Z: 360°/seg RADIO MÁXIMO DE CURVADO: 20 A 170 mm UNIDAD DE CONTROL: DNC800

Sąlyga: naudotas, Gamybos metai: 2001, Technical details: Tube diameter: 74 mm Wall thickness: 5 mm Minimum tube diameter: 10 mm Maximum tube diameter: 74 mm Round material (steel) max.: 40 mm Control system: Trumpf Tube Technology IsoBend 2.0 Maximum bending radius: max. 300 / min. 65 mm Maximum bending angle: max. 195° / min. 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Gtjdpeu Ibvhofx Aczot Tube loader length: 3000 mm Hydraulic working pressure, max.: 300 bar Total power requirement: 43 kVA Machine weight approx.: 8.5 t Machine dimensions LxWxH approx.: 6.5 x 1.6 x 1.6 m Control panel dimensions LxWxH: 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine with bending head and swivel arm (cold bending machine). Application: Suitable only for processing tubes, round bars, and wires made from steel, stainless steel, and non-ferrous metals. Thanks to the cross-slide of the bending head, the following advantages are provided: - Freely programmable X and Y axes - Cross-slide level change: Travel path = 300 mm (vertical position freely programmable) and max. horizontal movement 350 mm - Bending dies of different sizes within a die stack can be approached at will. Bending direction: right Control software: Trumpf Tube Technology IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec and max. acceleration 1100 mm/sec) In good condition. *

Sąlyga: naudotas, Gamybos metai: 1990, Technical details: Tube diameter: 42 mm Wall thickness: 25 mm Round steel: max. Ø 20 mm Square material: tube 25 x 25 mm Maximum bending radius: inner max. Ø 20 mm and outer max. Ø 170 mm Bending speed: not specified °/s Tube feeding length: 3000 mm Control system: RC 7000 software Machine weight approx.: 2.8 t Dimensions of control cabinet: 800 x 700 x 2000 mm Approximate machine dimensions (LxWxH): 5.1 x 0.7 x 2.0 m Application: Processing of formable pipes, rectangular tubes and round rods, as well as square tubes RC7000 software designation, manual programming Rectangular tube 42 x 20 x 2.5 mm Bending direction: leftward Operation via control panel Accessories: Gedpeu Ibvusfx Aczett -various bending tools for pipe Ø 25 mm -12 various collets -various auxiliary and clamping devices

Sąlyga: naudotas, Metal lathe Elmag, in good condition, approx. 1500 mm distance between centers, approx. 3000 kg. Subject to prior sale, price changes, errors, and typographical mistakes. Gtodpevrvmfefx Aczot

Gamybos metai: 1990, Sąlyga: geras (naudotas), Offer 20191 Gedpfxshrdmbe Aczstt Year of manufacture approx. 1990, overhauled in 2002 Technical Data: - Bending capacity at 45 kg / mm² up to approx. Ø 25 x 3 mm - Bending angle selectable left & right - Hydraulic double-sided bending function - Hydraulic feed - Drive: 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - Equipped with bending angle adjustment - Hydraulic clamping - Bending tools

Sąlyga: naujas, ELMAG Universal Lathe PREMIUM CU 630 RD - Vario Centre Distance 1000mm incl. RÖHM Chuck Performance Data and Specifications: - Turning Diameter: 325–1,320 mm, without gap: 440–1,500 mm - Turning capacity over carriage: Ø 190–940 x 6,000 mm - Drive motor: 2,200–22,000 W, 400 V, high torque - Chuck mounting: DIN 55027 - Tailstock taper: MT 3 – MT 6 Standard Equipment: - RÖHM three-jaw chuck - 5-piece quick-change tool post set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Tool carriage with splash guard - Base frame / chip tray / splashback - Tool kit / operating manual / CE certificate PREMIUM CU Series Standard Features: - Heavy-duty grey cast iron machine bed for excellent vibration damping Gtjdpfxet Hhbyj Aczjt - Removable gap bridge - Prism guides - Hardened and precision-ground main spindle, high concentricity, adjustable precision bearings - Quiet-running main spindle and feed gearbox with oil bath lubrication - Chromenickel steel gears, hardened and precision-ground - Feed reverse mechanism - Covered leadscrew with trapezoidal threads, hardened and precision-ground - Tool carriage with lock nut - Precision-adjustable slideways - Robust tailstock with adjustable quill offset - Lathe accuracy according to DIN standards Optional Accessories: - SINO digital position indicator for 3 axes - Indexable turning tool set 25 x 25 mm, 7 pieces - 7-piece indexable insert set, 25 x 25 mm - Parting tool set incl. inserts, 6-piece - Machine feet Ø 160 mm, 6 pcs Available on request: - Travelling steady - Fixed steady - Fixed steady with roller bearings - Faceplate - 4-jaw independent chuck ADVANTAGES: Main spindle and feed gearboxes with quick-shift levers Feed reversal Sliding safety guard Gearbox selector Halogen lamp Coolant pump Emergency stop Rapid traverse longitudinal feed motor TECHNICAL DATA: Centre distance: 2000 mm Centre height: 315 mm Swing over bed: 630 mm Swing over carriage: 430 mm Swing over gap: 830 mm Bed width: 400 mm Cross-slide travel: 315 mm Top-slide travel: 130 mm Max. tool shank section: 32 x 32 mm Chuck mounting (DIN 55027): No. 11 Spindle nose (main spindle): 120 mm Spindle bore: 103 mm Speed range 1, stepless: 16 - 63 rpm Speed range 2, stepless: 63 - 250 rpm Speed range 3, stepless: 315 - 1250 rpm Longitudinal feeds (120): 0.04 – 12 mm/rev Cross feeds (120): 0.02 – 6 mm/rev Metric thread pitches (64): 0.5 – 120 mm Metric module threads (64): 0.125 – 30 mm Inch threads, TPI (64): 60 – 1/4 TPI Inch module threads (64): 240 – 1 TPI Tailstock taper: MT 5 Tailstock diameter: 90 mm Tailstock travel: 230 mm Motor power: 11,000 W Mains connection: 400/50 V/Hz Total length: 3,600 mm Total height: 1,400 mm Weight: 3,310 kg

Sąlyga: naujas, Gamybos metai: 2025, This series of lathes can be used for a wide range of machining operations such as internal and external turning, taper turning, polishing, threading (metric, inch, modular, and DP), drilling, and internal broaching. Machine Features: - The 410x1000 CORMAK series lathe is suitable for diverse applications, including internal and external turning, taper turning, polishing, metric, inch, modular, and DP threading, drilling, and broaching. - Standard equipment includes a full 3-axis digital readout system. - Modern, high-precision spindle bearings. - Large spindle bore: 52 mm. - Heavy-duty cast-iron bed, ground and induction-hardened for durability and precision. - Gear transmission with heat-treated and finely ground gears. - Increased machining capacity thanks to removable bridge segment. - Safety guards compliant with the latest standards. - Machining accuracy: roundness deviation below 0.01 mm, cylindrical deviation not greater than 0.02 mm over 200 mm measurement; outstanding surface finish. - Equipped with a mechanical foot brake. - Option to retrofit the lathe with a taper turning attachment. Technical Specifications: SWING OVER BED: 410 mm SWING OVER CROSS SLIDE: 255 mm SWING IN BED GAP: 580 mm TURNING LENGTH IN GAP: 190 mm BETWEEN CENTRES: 1000 mm (optional 1500 mm) CENTRE HEIGHT: 205 mm BED: induction-hardened BED WIDTH: 250 mm SPINDLE BORE: 52 mm SPINDLE NOSE: D1-6 SPINDLE TAPER: No. 6 Morse SPINDLE SPEED RANGE: (16) 45–1800 rpm MAX TOOL SIZE: 20 x 20 mm LONGITUDINAL FEED RANGE: (17) 0.05–1.7 mm/rev CROSS FEED RANGE: (17) 0.025–0.85 mm/rev METRIC THREAD PITCHES: (42) 0.2–14 mm INCH THREAD PITCHES: (45) 2–72 TPI MODULE THREAD: 0.3–3.5 MP (18) DP THREAD: 8–44 DP (21) TAILSTOCK SLEEVE DIAMETER: 50 mm TAILSTOCK SLEEVE TRAVEL: 120 mm Gsdpfx Acjiz Tf Sjzjtt TAILSTOCK SLEEVE TAPER: MT 4 DIGITAL READOUT: Full 3-axis MAIN MOTOR POWER (S1/S6): 2.2 kW / 3.3 kW COOLANT PUMP MOTOR: 0.1 kW OVERALL DIMENSIONS: 1940 x 850 x 1320 mm WEIGHT (GROSS): approx. 1590 kg Standard Equipment: - 3-jaw chuck (200 mm) - 4-jaw chuck (250 mm) - 3-axis digital readout - Face plate - Fixed steady rest - Travelling (follower) steady rest - Spindle reducing sleeve - Live centre - Change gears for metric/inch threading - Coolant system - Lighting system - Threading dial indicator - Equipped with CE-compliant electromechanical foot brake - Chip tray - Complete set of service tools - Latest CE-compliant safety guards - Comprehensive operation manual in Polish - EC/CE declaration of conformity - Factory new machine with full warranty For more information, please visit our website.

Gamybos metai: 1997, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 403970905140, Offer 23291 Gjdpfxopr Utls Aczett Technical Data: End finishing machine for pipes with six-position turret - tool holder Pipe diameter: 6 - 40 mm Max. forming length: 100 mm Drive: 400 V / 7.5 kW Space requirement approx.: W 1200 x D 2100 x H 1500 mm Weight approx.: 1400 kg

Sąlyga: geras (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, plotis centre: 825 mm, centro aukštis: 350 mm, ašies variklio galia: 7 500 W, bendras ilgis: 2 800 mm, veleno greitis (min.): 300 aps./min, veleno greitis (maks.): 2 500 aps./min, quill skersmuo: 60 mm, plunksnos brūkšnys: 500 mm, bendras aukštis: 2 200 mm, bendras plotis: 2 000 mm, bendras svoris: 3 500 kg, produkto aukštis (maks.): 3 mm, padavimo jėga X ašis: 2 800 N, padavimo jėga Z ašyje: 2 800 N, padavimo ilgis X ašis: 250 mm, padavimo ilgis Z ašis: 450 mm, X ašies padavimo greitis: 6 m/min, padavimo greitis Z ašis: 6 m/min, Įrenginys yra mūsų sandėlyje. Jis prijungtas ir jį galima išbandyti. Gtodpoxfiq Hsfx Aczet