Gumos apdirbimo mašina

REP S06Y20

Būklė: visiškai atnaujintas (naudotas), Galimi gumos bandymo prietaisai Hjdpewmnlhjfx Aa Dsr 1 x Alpha Production MDR reometras (pageidaujant konteineryje su pneumatiniu mėginių štampavimo įrankiu) Prietaisas patikrintas, sukalibruotas ir aprūpintas nauja programine įranga naujame Tower kompiuteryje!

Būklė: naujas, Gamybos metai: 2025, bendras ilgis: 1 600 mm, bendras plotis: 2 200 mm, bendras aukštis: 2 350 mm, bendras svoris: 250 kg, įvesties srovės tipas: trifazis, darbinis plotis: 1 400 mm, Paint booth, spray wall, extraction unit TQN1414 With right- or left-side discharge. Working dimensions (mm): 1400 (W) x 1400 (H) x 800 (D) Overall dimensions (mm): 1600 (W) x 2350 (H) x 1250 (D) SPECIFICATION: • Fan output: 1.5 kW, • Capacity: 6,500 m³/h, • 2 x 100% polyester filters • Filtration efficiency of 99.9%, • IP 66 control panel, • Automatic filter cleaning, • Hermetically sealed lighting, IP 65, • Paint tank Cabin is available immediately (in stock) CHOOSE BUMEX SP. Z O.O. Very high-quality machines among those offered on the market. Professional consultation and service. Warranty. Warranty and post-warranty service. Hsdpfsd S N I Nsx Aa Der Comprehensive technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are EC-certified. We offer our own transport – pricing is determined for each specific offer. We issue invoices with VAT shown. Short delivery times! Possibility to order machines in various, customised configurations and dimensions! Please contact us.

Gamybos metai: 2010, būklė: geras (naudotas), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the working head and machine work area - Numerical control (controller) with BIESSE Works software running on Windows - Vertical positioning of panels, with 2 panel clamping grippers - Panel feed (in X-axis direction, on the lower rubber wheel support), movement (on X-axis) of the panel/table clamping grippers Hsdpfx Aehknbrja Dor WORKPIECE DIMENSIONS (WORKING RANGE): - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm - Thickness Min 8 mm / Max 80 mm WORKING UNITS: - No. 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18,000 RPM) - No. 1 circular saw (for grooves) diameter 120 mm (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - No. 1 hinge drilling head unit - Total installed power 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH FACES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Būklė: geras (naudotas), Código: 0253 Marca: LARI E LARI - ITALIA Modelo: FR 20 - TA - Norma CE Centro de trabajo para fresado y taladrado en madera, plástico o materiales compuestos, puertas de madera, marcos de ventanas - Norma CE Datos técnicos: Recorrido del eje X: 3250 mm Recorrido del eje Y con herramienta a 90°: 130 mm Recorrido del eje Z con herramienta a 0°: 290 mm Recorrido del eje Z con herramienta a 90°: 175 mm Velocidad de trabajo del eje X: 40 m/min Velocidad de trabajo del eje Y: 30 m/min Velocidad de trabajo del eje Z: 30 m/min Unidad de taladrado y colocación de bisagras: Machos/Hembras Control de velocidad por inversor Sonda Portaherramientas tipo ER 25 Potencia del husillo eléctrico para taladrado de cabeza anuba: 2,2 kW Inclinación de la cabeza anuba: -10° a +90° Husillo eléctrico para fresado: 2,7 Hp a 18.000 rpm Portapinzas ER 32 Velocidad variable mediante inversor Inclinación de 0° a 90° para trabajos tanto verticales como horizontales Hodpfxjx A Hdxj Aa Dor Ordenador de máquina: control numérico - sistema operativo Windows XP - monitor en color - teclado alfanumérico - puerto USB - interpolación Mesa de trabajo con 3 mordazas deslizantes para fijación de piezas Potencia total instalada: 12 kW Diámetro de boca de aspiración: 120 mm Aire comprimido: 7-8 bar Dimensiones generales para el transporte: 4100 x 1500 x 2100 mm (alto) Peso de la máquina: 1.400 kg Peso del cuadro eléctrico: 250 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, veikimo valandos: 180 h, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 8 000 mm, bendras plotis: 1 200 mm, bendras aukštis: 1 300 mm, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 400 V, galia: 10 kW (13,60 AG), SOEST Universal Surface Treatment Line for oiling, staining, lye treatment, patination, etc. Primarily designed for parquet surfaces up to 40 cm workpiece width. 1) Roller machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Brushing machine VP-400-1B-2P-2B with one brush, two disc pads, and two additional brushes, for applying, working in, or patinating surface media into pores and/or for removal, distribution, or working depending on the desired surface effect. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four spare brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface treatment line is built for professional industrial use and is configured with the highest level of equipment. A wide range of accessories such as additional rollers and cleaning machines are included (see pictures!). Very robust construction, all motors are frequency-controlled (Siemens). Speeds are infinitely adjustable for both forward and reverse operation. Maximum workpiece width approx. 410 mm. The system is in excellent condition, with only around 180 operating hours, and is therefore considered as good as new. This surface machine was only used as a backup line in a parquet production and was deployed only for specific surface techniques, hence the very low operating hours. That means the line was used only sporadically between 2019–2022. In 2023, our company downsized, and the system has been stored since then—immediately available and therefore in almost mint condition! We no longer require this system and are therefore selling it. The original purchase price of this line in 2019 was approximately €87,000; the current price is negotiable! Hjdpfx Aasyaiafs Dor Viewings of this line are welcome by prior arrangement. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video is for reference only and shows a similar system configuration!)

Būklė: dilaminuotas dirbtuvėje (naudotas), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual loading): 12 mm Max. sheet thickness (automatic loading): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total connected load: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control system, OP 37 panel - Climate-controlled control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individual emitter control for both top and bottom heaters - Parallel clamping frame - Locking of upper reduction frames via pneumatic motor - Locking of lower reduction frames via cylinders - 4 cooling fans - Table vacuum adjustable via cascade circuit - Pre-blow and demolding adjustable via cascade circuit - Large front opening for tool change - Film sag monitoring by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping by vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-release tool clamping system Hedjwf Dvaepfx Aa Dsr Sheet feeding: - Automatic lifting of the film transport chain by motor - Pneumatic quick-change system for suction plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional retrofit: Preheating system: - Pneumatically operated top heater, overall field control, individual emitters can be switched on/off via toggle switches - Pneumatically operated bottom heater, overall field control, individual emitters can be switched on/off via toggle switches - Temperature control of top and bottom heaters via separate controllers in the BE control cabinet (temperature setting not via operator panel of UA) Optional retrofit for roll processing: - Cross cutter and feed rollers in feeder - Roll stand RO 800

Būklė: naudotas, Gamybos metai: 2012, Feeler NBP 1300A gamybos metai 2012 Hodpfeww Indsx Aa Dor X ašies eiga 1300 mm Y ašies eiga 610 mm Z ašies eiga 600 mm Stalas 1500x600 mm Verpstė 12 000 aps./min BT40 Aušinimas per verpstę Valdymas Heidenhain TNC 530

Būklė: naudotas, Metal lathe Elmag, in good condition, approx. 1500 mm distance between centers, approx. 3000 kg. Subject to prior sale, price changes, errors, and typographical mistakes. Hedevrvmfspfx Aa Dor

Būklė: naudotas, mašinos/transporto priemonės numeris: 007649, Maks. apdorojimo plotis: 600 mm Klijų sistema: EVA Hsdpfx Aaju Eviqj Dor

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, on request Hedpfx Aaefxgmgs Dsr