Lengvojo metalo / aliuminio diskinis pjūklas

TEKNA TK 804/1

Gamybos metai: 2023, Sąlyga: naujas, IMMEDIATE AVAILABILITY! Codpfx Adon Smbremerk Vibratory Finishing Machines with Separator The machines of the VKUE series can be used for surface processing of both metallic and non-metallic workpieces. These machines feature a large screening area, allowing for easy separation of workpieces from the grinding media. Optional Accessories - Pneumatic sound cover - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinse pipe (various types) Images are for reference only. Optional accessories are available at an additional cost.

Sąlyga: naujas, Gamybos metai: 2024, 10-ton container rotator Dual synchronized drive Continuously adjustable axle spacing via threaded spindle Credpfxoifk Rbe Admsk Continuously variable speed control With foot remote control Suitable for diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed range: 200 - 1,200 mm/min.

Sąlyga: visiškai atnaujintas (naudotas), Portal Straightening Press Pressing Force: 450 t Stroke: 50 mm Daylight Opening: 1000 mm Working Area: Crsdpfx Adsfcnu Ijmsk - Length: 5200 mm - Width: 2300 mm - Height: 1000 mm Weight: 45,000 kg Screw Distance (Left-Right): 1000 mm

Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 2852, Gamybos metai: 2006, keliamoji galia: 8 000 kg, kėlimo aukštis: 5 000 mm, stiebo tipas: dupleksas, šakių laikiklio plotis: 150 mm, šakių ilgis: 1 600 mm, bendras ilgis: 4 120 mm, bendras plotis: 2 220 mm, papildomos įrangos savybės: Dual tread, Weight system, Fire extinguisher, Įranga: apšvietimas, TCM FD80 iš Uniktruck Crjdpfx Ajrk Rd Njdmsk

Gamybos metai: 2018, Sąlyga: beveik kaip naujas (parodų įrenginys), Mitre saw with a saw blade diameter of 600mm (optionally 800mm) Crodpfx Aed Rhzwsdmek - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and angle of the clamping cylinders infinitely adjustable) - Two-hand safety control Optional available: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Version as automatic saw - Loading magazine - Horizontal clamping device - Extraction system - Further accessories on request We would be pleased to provide you with an offer tailored to your requirements. The machine can be inspected and tested at 56812.

Sąlyga: naudotas, Gamybos metai: 2010, Maximum turning diameter: 410 mm Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Main spindle speed range max.: 4,000 rpm Main spindle drive power: 35 / 45 kW Maximum torque: 770 Nm Spindle nose: 220 h5 Spindle diameter at front bearing: 160 mm Maximum usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool positions: 12 stations Number of driven tool stations: 12 stations Speed range - driven tool stations max.: 4,000 rpm Drive power (driven tool stations): 12 kW Maximum torque: 36 Nm Tool holder: VDI 40 DIN 69880 Turret indexing time 30°: 0.4 sec. Y-axis: 120 (+/- 60) mm X-axis: 300 mm Z-axis: 1,300 mm y-axis: +/- 60 mm Tailstock travel: 1,200 mm Cjdpfsvzhiwex Admork Tailstock taper: MK 5 Clamping pressure: 1,400 daN Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Space requirements: approx. 6.0 x 3.5 x 2.5 m CNC turning and milling center GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Driven tools - Direct measuring system - Bar machining package - Connection for bar feeder / bar loading magazine

Sąlyga: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. Cedpfjt Ii Rrjx Admsrk - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible The machine is already delivered. An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: naujas, Gamybos metai: 2025, Įvairūs klijų bakai kraštų juostoms ir kraštų juostavimo mašinų keturkampiams apdirbimui. Tiekiame naujus klijų bakus arba remontuojame jūsų naudotus. Taip pat parduodame atskiras atsargines dalis. Cedpfef Tc Rqsx Admsrk SCM, Stefani, IDM, IMA, Biesse

Sąlyga: naujas, Saw blade diameter: 370 mm Cutting range at 90 degrees, round: 120 mm Cutting range at 90 degrees, square: 100 mm Cutting range at 90 degrees, rectangular: 180 x 100 mm Working height: 925 mm Saw blade speeds: 17 - 70 rpm Total power requirement: 3.0 kW Machine weight approx.: t Space requirement approx.: 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic. (20195) · Miter cut left 60° + right 45° Crjdpfod Iin Esx Admsk · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, high-performance worm drive with large transmission ratio, integrated in a robust cast housing for optimal cutting results · Vise with double clamping arm, ensuring burr-free cuts and featuring quick lateral adjustment for miter changes · Precision prism guide for the gearbox head, laterally adjustable · Especially robust base frame with integrated automatic cooling system · Large chip drawer · Chip removal brush integrated in the saw blade guard CNC control: · Button-operated with over 90 different sawing programs, each with up to 99 subprograms for length, quantity, and angle · Automatic feed unit, 2,000 mm via ball screw, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Preselection of 3 different material feed speeds · Visualization of the entire workflow with simple data input PLEASE NOTE: Price does not include saw blade! (Saw blade price: €204)

Sąlyga: geras (naudotas), Gamybos metai: 2006, Technical Specifications – QTN-250M (Turning Length 1000 mm) Chuck Size: 10 inch Maximum Swing Diameter: 677.5 mm Crsdpfx Aowfynfodmek Standard Turning Diameter: 430 mm Maximum Machining Diameter: 633 mm Maximum Machining Range: 677 mm Maximum Turning Length (Z-axis): 1000 mm Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-min rating): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf·m) Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Turret: • 12 tool stations • Tool Sizes: • External Turning Tool: Ø40 mm • Internal Turning Tool: Ø20 mm • Milling Drill: Ø20 mm • Milling Tap: M12 Milling Spindle: • Speed: 25–4500 rpm (optional 6000 rpm) • Motor Power: 5.5 kW (7.5 HP) • Maximum Torque: 35 Nm (3.6 kgf·m) Coolant Capacity: 160 liters Machine Dimensions: • Width: 1780 mm • Overall Height: 2533 mm • Footprint: approx. 4.51 m² • Machine Weight: approx. 5200 kg Includes: 1x Chip Conveyor, 1x Tray Photos to follow shortly