Forma bandymo presas

TCS CANNON FINIX 300 T

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 Guodpfow U N Ixex Af Dja ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Būklė: naudotas, Gamybos metai: 2010, Pressure: 600 t Column gap: 3,640 mm Fixed stroke: 350 mm Guedsvut Dyjpfx Af Dja Stroke rate: 11 - 44 strokes/min Die height (stroke + ram adjustment at top): 1,550 mm Side column clearance: 2,200 mm Table area: 3,600 x 2,500 mm Ram area: 3,600 x 2,500 mm Ram adjustment: 400 mm Strip width: 2,000 mm Material thickness: 0.6 - 2.5 mm Material cross-section: 1,600 x 2.5 mm² Coil weight: 35.0 t Number of straightening rolls: 13 Roll diameter: 50 mm Blank cutting line (press, coil line, blank stacking system) Year of manufacture: 1993 - 2010: new Siemens S7 control - Schuler press, EBS 4-600-3.6-350, with infinitely variable articulated drive, flywheel brake, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, ram locking system Sliding table (2x) without rails for traversing table - Schleicher decoiler, HE - 355 - 2100, year 1994, with auxiliary drive, hold-down device, movable - Coil loading chair - Schleicher pull-off device - Crop shear - Leveller make Schnutz, type RME 18/50/13-2000 TZ, year 1994, with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - Loop bridge - Roller feeder make Schleicher, type WV-SYS-A 160-2000, year 1994 Blank stacking system / NSM-Magnettechnik destacker Disassembled, stored - video available from seller prior to dismantling

Būklė: naudotas, Gamybos metai: 2020, Funkcionalumas: nepatikrintas, darbinis greitis: 110 mm/s, atbulinės eigos greitis: 180 mm/s, atstumo lentelė iki stūmoklio: 1 500 mm, bendras ilgis: 3 800 mm, bendras plotis: 4 500 mm, bendras aukštis: 6 400 mm, We are offering a new build of the machine shown here. The machine was commissioned in 2020 and can be inspected at the customer’s site. Technical Specifications: Press Force: 800 T Opening Force: 80 T Motor Power: 55/75 + 55/75 kW Ram Stroke: 1000 mm Rapid Advance Speed: 110 mm/s Gujdpfowlrv Uox Af Doa Working Speed: 6 mm/s Return Speed: 180 mm/s Guide Diameter: 250 mm Maximum Pressure: 250 bar Usable Table Area: 3,500 x 2,000 mm Lower Table Travel: 2,000 mm Between Columns: 2,000 mm Clear Height: 1,500 mm Total Width (Front): 3,800 mm Total Depth (Side): 4,500 mm Overall Height: 6,400 mm Weight: 134,600 kg The MV-800E/NC-SINCRO press has been specifically developed for setting up and testing molds, dies, and punches. The four columns, each with a diameter of 250 mm, are made from C45E steel and designed to withstand heavy-duty use. It is equipped with an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability. The system meets all essential health and safety requirements according to CE regulations. STRUCTURE AND TABLE • A structure capable of withstanding 600 T of concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table area: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders, each with 400 T capacity. • Single-stage hydraulic unit with automatic shut-off of rapid advance speed and independent operation, equipped with decompression and proportional pressure pre-fill valves. Includes digital potentiometers on the upper table for displacement control, and an electronic synchronization system for compensation of off-center or unbalanced forces. • The press is fitted with a lateral pressure switch for optimal pressure adjustment according to the working requirements. • Glycerine gauge with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electric system for operating the main cylinder feed at one or two speeds. • The press features both a manual and automatic cycle (activated via a test selector switch): • The manual cycle allows all movements of the press to be executed step-by-step at low speed. • The automatic cycle enables the press to complete a full production cycle independently. • Electrical safety system for the upper table fall-arrest device. • Lower table with hydraulic withdrawal and physical stops. • The machine is operated via a control panel with a touchscreen display for entering operating and calibration data. • Two optical safety curtains (1,000 mm) with safety level IV are installed at the front and rear. • Siemens electrical components are manufactured in accordance with current CE regulations and IP55 protection class. • Electrical and hydraulic functions are redundant and self-monitoring. Includes an additional safety block and self-testing devices for both operation and safety. Includes inspection and certification for correct operation and the safety distance of the light barriers. • Safety is additionally ensured by a laser and area protection with safety light curtains, safety level IV.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Gamintojas: ROVETTA Metai: 2003 Būklė: Naudotas Gusdpfoxlh Rfsx Af Dea Sandėlio numeris: 0385 Spaudimo jėga: 630 t Jungiamųjų strypų skaičius: 4 Stumoklio eiga: 300 mm Stumoklio reguliavimas: 250 mm Formos tarpas PMI taške: 950 mm Kirtimų skaičius/min: 15/65 Didžiausias priekinis tarpas: 5 200 mm Stalo matmenys: 5 000 x 2 630 mm Stumoklio matmenys: 5 000 x 2 630 mm Pagrindinio variklio galia: 132 kW

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 5 750 mm, tarpas tarp stulpų: 3 200 mm, įrengimo aukštis: 6 800 mm, bendras plotis: 2 890 mm, bendras ilgis: 8 500 mm, stalo plotis: 2 000 mm, stalo ilgis: 3 000 mm, stalo apkrova: 70 000 kg, atbulinės eigos greitis: 50 mm/s, spaudimo jėga: 3 000 kN, Millutensil bandymo/hidraulinė presas MIL 303 Trumpas aprašymas Pagaminimo metai: 2012 • Hidraulinis presas, tipas 303.011 • 300 t presavimo jėga • Naudojamas stalo ilgis: 3000 mm • Naudojamas stalo plotis: 2000 mm • Maksimalus atstumas tarp kolonų išilgai: 2130 mm • Maksimalus atstumas tarp kolonų plotyje: 3200 mm • t-formos grioveliai staluose: 28 mm (pagal DIN 650) • Maksimali atsidarymo jėga: 800 kN - maksimali uždarymo jėga: 3000 kN - viršutinio stalo sukimas: 100-180 laipsnių • Hidraulinis slėgis, reguliuojamas nuo 0 iki 240 bar Gujdpfx Ajygkwxef Dea • Priartėjimo greitis (greitas): 65-80 mm/s / darbo greitis: 8 mm/s • Grįžimo greitis: 35-50 mm/s • Viršutinio pagrindinio variklio galia: 30 kW • Viršutinio pagalbinio variklio galia: 1,1 kW • Bendra preso galia: 31,1 kW • Maksimali apkrova ant viršutinio stalo: 30000 kg • Maksimali apkrova ant apatinio stalo: 70000 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Gamintojas: GIGANT Modelis: G2-1200/2 Metai: 1993 Būklė: Naudotas Sandėlio numeris: 0375 Gedpfxsx R U Ids Af Dsua Spaudimo galia: 1200 t Spaudimo taškai: 2 Formos plokštės matmenys: 3.700 x 2.700 mm Stumoklio matmenys: 3.700 x 2.700 mm Stumoklio eiga: 1.000 mm Maksimalus vertikalus tarpas: 1.590 mm Formos tarpas prie PMI: 610 mm Apatinio lakšto laikiklio eiga: 400 mm Mobilus vežimėlis: Priekyje