Universalus apdirbimo centras

Tajmac ZPS Turnmill 1250

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Fpodpfoh Nypfex Afqjl

Gamybos metai: 2022, veikimo valandos: 108 h, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: SN2120, EDM312MF30-SLM (second-life machine) Technical Data: Travel paths: 450x300x300 mm Workpiece clamping table: 820x400 mm Tank size: 900x520 mm Fill height: 300 mm Distance table/electrode holder: 150/450 mm Max. workpiece weight: 800 kg Max. dielectric capacity: 700 l Dimensions (W x D x H): 2700x1800x2350 mm Machine weight: 2,500 kg Power connection: 3/N/PE 400/230 V 50Hz Power consumption: 6.7 KVA Equipment: Paintwork: newly painted in light grey + tele grey New control cabinet New control system: APC910/2 (Win10) Operating interface: MF30 V 2.8 New B&R drives with Endat interface Touchscreen monitor Exopuls+ 60A generator Rev.4 5-position tool changer Contact guard operable via push-button Linear scales in all axes X, Y, Z (Fagor) 2 cartridge filters Cooling unit: Termogamma Completely new machine installation New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve manifold CO₂ extinguishing system Fjdpfx Afshtrdysqopl C-axis Hirschmann 50/min., holding brake completely overhauled Hand control panel with enabling switch Automatic lowering tank alignment Erowa IST, Hirschmann, 3R chucks 12-month warranty Transport On-site commissioning Training

Būklė: naudotas, Gamybos metai: 2003, x-axis travel 800 mm y-axis travel 600 mm z-axis travel 805 mm Control system: Sinumerik 840D Machine weight approx. 13 t 1 horizontal machining centre Manufacturer: HECKERT Model: CWK 500D Year of manufacture: 2003 Fpsdpfx Afeuddgfoqol Serial No.: 16087 Control system, make: Siemens, model: Sinumerik 840D Travel paths X/Y/Z: 800 x 600 x 805 mm 2-pallet changer Pallet size: 500 x 500 mm NC rotary table: 360 x 0.001° 60-tool automatic tool changer, Tool holder: HSK 63 Max. spindle speed: 15,000 rpm Internal coolant supply: 50 bar Operating hours: 32,450 Spindle hours: 6,080 Equipment: Coolant temperature control, band filter, chip conveyor, spindle cooling, Preparation for infrared measuring probe

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2017, veikimo valandos: 6 117 h, - NAUDOTAS - 3 AŠIŲ VERTIKALUS APDIRBIMO CENTRAS Fpsdpfxezhc Anj Afqel X AŠIES EIGA: 1050 mm Y AŠIES EIGA: 570 mm Z AŠIES EIGA: 510 mm ATSTUMAS NUO VELENO GALO IKI STALO: 150-660 mm GREITOSIOS EIGOS X-Y-Z: 36 - 36 - 30 m/min VELENAS: 15000 aps/min; 10 - 17 kW; ISO 40 - DIN STALO MATMENYS: 1300 x 570 mm MAKS. LEIDŽIAMA APKROVA: 1000 kg ĮRANKIŲ MAGAZINAS: GRANDININIS TIPAS; 30 POZICIJŲ MAKS. ĮRANKIO SKERSMUO: 80 (125) mm MAKS. ĮRANKIO ILGIS: 300 mm MAKS. ĮRANKIO SVORIS: 8 kg VALDYMO BLOKAS: HEIDENHAIN TNC 620 SVORIS: 6500 kg BENDRI MATMENYS: 3110 x 2413 x 2985 mm PRIEDAI: AUKŠTO SLĖGIO AUŠINIMAS; DROŽLIŲ TRANSPORTERIUS; ETERNETO PRIJUNGIMAS; USB PRIJUNGIMAS; ĮRANKIO NUSTATYMO PRIETAISAS; PALAIKYMO ZONDA; NEŠIOJAMAS VALDYMO RANKENĖLĖ

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4501, X ašies eiga: 3 500 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 1 300 mm, sukimosi greitis (min.): 6 000 aps./min, Įranga: drožlių transporteris, sūkių greitis be galo kintamas, Mašinos konfigūracija: • UniSpeed3500 • Centrinis drožlių transporteris • Valdymo pultas šoniniam ir priekiniam valdymui • Platforma • Paminkštinta sėdynė • Rotoclear šoninis stebėjimo langas • 3-spalvė signalinė lempa • Pagrindinis pavara iki 6.000 sūkių/min • Įrankio tvirtinimas SK 50 BigPlus • Ortogonalus frezavimo galvutė (C ašis 0,01°, A ašis 0,01°) • Siemens Sinumerik One • Nešiojamas valdymo įrenginys HT2 • Apvalus stalas Ø 1.600 mm, 8 t Fpodpoygtqbefx Afqol • Šoniniai frezavimo stalo segmentai • ToolRunner 90 įrankių • Aušinimo skysčio sistema 950 l • Aušinimo skysčio siurblys 40 bar / 32 l/min • Aušinimo skysčio ir oro perjungimas • Plovimo pistoletas darbo erdvėje • Belaidis matavimo jutiklis m&h • 1 kanalo susidūrimo stebėjimo sistema • Darbo režimas 3 • Oro valymo įrenginys 4.000 m³/val.

Būklė: geras (naudotas), Gamybos metai: 1970, Funkcionalumas: visiškai funkcionalus, Vieno stulpo karuselinis tekinimo staklės | Froriep DS 14 NC Staklės buvo kapitališkai suremontuotos 2009 m., neseniai išvalytos ir yra geros būklės. - Plokštės skersmuo: 1.400 mm - Apdirbimo skersmuo: 1.600 mm - Tekinimo aukštis: 1.500 mm - Valdymas Siemens tipas 840 D - Įrankių keitiklis - Ruošinio svoris: 6.500 kg Fpedpfx Afoyft S Ajqol - Atramos vertikalus poslinkis: 1.000 mm - Sukimosi greitis: 10–315 aps./min - Pasiūla: 3.600 mm/min Apžiūrėti galima bet kada iš anksto susitarus. #Žymos: Froriep | DS14 | DS14NC

Būklė: geras (naudotas), Gamybos metai: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control system FIDIA M30 Spindle power 37 kW Spindle speed 4500 rpm Column clearance 2300 mm Fsdpjvwgmgofx Afqepl Distance spindle to clamping surface 1250 mm Taper ISO SK-50 Table size (longitudinal) 3000 mm Table size (cross) 1500 mm The 5-axis portal milling machine Ingersoll-Bohle is in good condition and can be inspected by appointment with the seller. Accessories: - High-frequency high-speed spindle, 3.8 kW, with 25,000 rpm. Description: - Continuously adjustable angular milling head (spindle speed 4500 rpm).

Gamybos metai: 1990, būklė: naudotas, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Total power requirement kW Machine weight approx. t Space requirement approx. m Overhauled: 2000 X-axis as longitudinal, traversing gantry 850 mm Y-axis cross slide in gantry 1,200 mm Z-axis as measuring head quill (vertical) approx. 600 mm Passage width between gantry legs approx. 1,000/1,080 mm Passage height approx. 750 mm Table size approx. 1,000 x 2,100 mm Table height above floor approx. 850 mm Machine height approx. 3,050 mm Weight approx. 3,800 kg Special equipment / Accessories: - Granite plate as measuring table and gantry head, vibration-damped - 3D measuring touch probe head for 5 different styli and for SCANNING mode for continuous data capture, resolution 0.1 µm - CNC control for simultaneous 3-axis movement - HEWLETT-PACKARD computer system H 382 with color screen, floppy drive, keyboard, possible printer - ZEISS software included: UMESS 300/MFT 300 with extension package (status 1998), plus 302 form & positional tolerance measurement, 303 fitting functions, 305 automatic operation, 307 Parameter Ctrl. Manager, plus option Tools/KMG Disk Rev. 7xxx / SAM 300 / KMG Disk / borehole pattern program A 741 and Probe Check 99, - Mobile hand control panel with progressive joystick for continuously variable travel speed in 3 axes - Probe magazine mounted on the machine, equipped with 3 probes, including probe changer Fpsdst Hwqkjpfx Afqol - Separate electrical and control cabinet type 608485, separate computer desk, separate cabinet - Operating manuals, various measuring probes, and bolt-on calibration spheres / reference standards for the table

Būklė: geras (naudotas), Gamybos metai: 2011, Ref. No.: 10598 Manufacturer: HELLER Model: MC 2000 Year of manufacture: 2011 Control type: CNC control Controller: Siemens 840 D sl Location: Halberstadt Country of origin: Germany Machine No.: 50XXXX X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 1000 mm Working spindle torque (at 25% DC): 242 Nm Fodox Hn D Rspfx Afqopl Tool holder: SK 40 Number of tool stations in magazine: 54 Tool magazine equipped with: 80 pcs. Spindle speed: 10,000 rpm Main spindle drive power: 17 kW High-pressure pump: 50 bar Main spindle speed range: 10,000 rpm Number of pallets: 2 Pallet size (LxW): 630 x 500 mm Machine weight approx.: 13,000 kg Spindle hours: 7,000 h Operating hours: 14,000 h Set-up stations: 4 x 90° Hydraulic pressure: 200 bar Additional information: - Machine has been measured - Geometry is in excellent (1A) condition - Spindle runs somewhat rough - Clamping towers and tool holders included - 2 additional clamping towers - 2 spare pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in work area - Central cooling unit for motor spindle and electrical cabinet - Operator panel at the set-up station - NC-controlled rotary table - Clamping hydraulics Machine can be inspected under power by arrangement.

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 28820005482, X ašies eiga: 1 000 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 500 mm, X ašies padavimo greitis: 50 m/min, Y ašies padavimo greitis: 50 m/min, padavimo greitis Z ašis: 50 m/min, greitas poslinkis X ašimi: 50 m/min, greitas poslinkis Y ašis: 50 m/min, greitasis eiga Z ašyje: 50 m/min, Įranga: dokumentacija / vadovas, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not documented in writing, but we assume it is from 2001. Please refer to the attached images for further details. We are, of course, available at any time to answer any questions you may have. Fodpfjvx N Shox Afqopl The machine can be inspected under power by appointment. Collection with a suitable truck is to be organized by the buyer. Dismantling and removal of the machine can be carried out either by the buyer or by us (at an additional cost of €1,500).