Cilindrinės šlifavimo staklės

Tachella Elekra 1518- MPC

Sąlyga: naudotas, Gamybos metai: 2001, Space requirement approx. 1450 x 1560 x 2620 mm Machine weight approx. 1.8 t The machine base is a heavy welded construction. The coolant oil tank is integrated in the machine bed. The cross table is made of cast iron; the guideways are ground and hand-scraped with adjustable gibs. The ram head is also made of cast iron; the guides are ground and hand-scraped and equipped with lubrication grooves. The ram head can be swiveled +/- 20 degrees. Stroke adjustment is accessible via the side opening. The tool is positioned at the longitudinal stop. The machine features a mechanical stroke drive. The control unit for the CNC dividing head is integrated in the control panel. The zero point can be set at any position of the dividing head, with division options of 2–999 symmetric and 99 asymmetric divisions. Machine color: Green Dividing head color: Red --> Technical Data Adjustable stroke from 0 to: 250 mm (No. 1) --> Distance column/toolholder: 425 mm (No. 2) --> Distance table surface/head: 430 mm (No. 3) --> Vertical ram adjustment: 430 mm (No. 5) --> Rotary table diameter (NC on axis A): 450 mm (No. 6) --> Longitudinal table travel (NC on axis Y): 250 mm (No. 8) --> Cross table travel (NC on axis X): 220 mm (No. 9) Csdpfxjwbi Awj Admeaa --> Bore in table center: 135 mm (No. 10) --> Infinitely variable ram strokes per minute: 22–90 strokes/min --> Ram motor power (automatic brake, asynchronous): 3 kW --> Dimensions (ram fully raised, LxWxH): 1450x1560x2620 mm --> Digital operating manual available in German & English

Sąlyga: naujas, Gamybos metai: 2024, 10-ton container rotator Dual synchronized drive Continuously adjustable axle spacing via threaded spindle Continuously variable speed control With foot remote control Suitable for diameters from 300 mm to 3,500 mm Cajdpfx Ajifk Rbsdmja Roller width and diameter: 120 x 270 mm Speed range: 200 - 1,200 mm/min.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Pagaminimo metai: 2001 X - 548,6 mm, Y - 408,9 mm, Z - 459,7 mm Galia - 5,6 kW Sūkių skaičius - 15000 aps./min. Automatinis įrankių keitiklis (ATC) - 30 Stalas - 599,4 mm x 378,5 mm Kūgis - BT40 Valdymas - CNC (Yasnac J300) Staklių svoris: 4 tonos Cedsgx Aafjpfx Admjaa Staklių matmenys: 7' x 8' x 9'

Gamybos metai: 1974, Sąlyga: naudotas, Druck: 340 t Hublänge: 200 mm Csdpfx Ade Du Uwomsaa Tischgröße (unten): 100 x 800 mm Abstand zwischen Ober- und Untertisch: - offen: 510 mm (Lichtöffnung) - geschlossen: 310 mm Neue Hydraulik- und Elektrikanlagen

Gamybos metai: 2018, Sąlyga: naudotas, x-travel: 1600 mm y-travel: 1300 mm z-travel: 700 mm Distance between columns: 1500 mm Distance spindle center to table: 225-925 mm Table size: 1800 x 1300 mm Table load: 4000 kg T-slots (Width x Pitch x Quantity): 22 x 160 x 8 mm Spindle taper: HSK-A 63 Spindle speed: 24,000 rpm Spindle motor: 25/33 kW Spindle motor torque: 72.6/95.8 N.m. Rapid traverse in X-Y-Z axes: 30,000 mm/min Feed rates X/Y/Z axis: 1~20,000 mm/min Tool changer: 20 positions Cajdpfx Ajhx R Dvedmea Max. tool diameter: 100/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Total power requirement: 80 kVA Machine weight approximately: 22 t Machine dimensions (LxWxH): 5660 x 5295 x 3930 mm CNC control: Heidenhain TNC 620 Spindle: IBAG electric spindle 24,000 rpm HSK-A 63 Glass scales: Heidenhain Tool changer: 20 positions Chip conveyor - spiral: 2 units Used CNC high-speed gantry milling machine with extensive accessories at a special introductory price. Key component manufacturers for this stock machine include: · Controller and servomotors: Heidenhain, Type TNC 620 · Ball screw bearings: Japan NSK · X-axis ball screw: Taiwan Hiwin · Y-axis ball screw: Taiwan Hiwin · Z-axis ball screw: Taiwan Hiwin · 3-axis linear guideways: Japan THK or Germany Rexroth · Electric spindle unit: HSK A63-24,000 rpm by IBAG · Linear encoders: Heidenhain · Pneumatic system: Japan SMC · Lubrication: Japan Showa · Covers: Hema · Air conditioning: Taiwan Kaokung · Spindle water cooler: Taiwan-Punkt · 3-axis cable drag chain: Germany Igus · Coupling: Germany KTR · Machine enclosure: Germany Mecano · Relays: Omron · Electrical systems: Germany Schneider · MPG handwheel: Japan Tosoku For more information about the machine, standard accessories, and special accessories, please refer to the attached documentation. Of course, we are also happy to organize delivery to your location including assembly/commissioning, handover ready for operation, as well as operator training.

Sąlyga: geras (naudotas), Gamybos metai: 2004, Spindle bore: 60 mm Turning length: 280 mm Control system: Siemens 840 D Main spindle speed: 6300 rpm Drive power (spindle motor): 3.3 kW Turret 1: Disc turret Number of tools in turret 1: 8 Tool system: DIN 69 880 / 25mm X-axis travel: 90 mm Z-axis travel: 280 mm Feed force: 5500 N Rapid traverse: 24 m/min Milling spindle drive power: 5.000 kW Turret 2: Dovetail turret Number of tools in turret 2: 6 X-axis travel: 81 mm Z-axis travel: 80 mm Feed force: 5500 N Rapid traverse (X-axis): 16 m/min Rapid traverse (Z-axis): 24 m/min Machine weight: approx. 2.5 t Space requirement: approx. 6.0 x 2.0 x 2.0 m The INDEX ABC is a compact CNC lathe for short-turned parts made from bar stock. It features a slant-bed design with two independent turrets. The upper turret is mainly designated for internal machining and cut-off-side operations, while the lower turret handles external machining. This turret configuration allows for collision-free operation and simple programming with high tool availability. The large open working area promotes optimal chip flow. Working area features two turrets: "Turret 1": - Disc turret with 7 radially arranged tool positions Ø 25 mm DIN 69880 and one position for the reinforced synchronized spindle at turret station 8. With an adapter, tools with 1'' shanks may also be used. The turret head is prepared for the V-guide system. - Synchronized spindle for backworking, allowing simultaneous parallel machining with the main spindle. Collet chuck Ø42 or 3-jaw gripper chuck for internal and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-drilling unit. Starting from the center of the working spindle in a clockwise direction, three stationary back drilling tools are arranged. These are located on the pitch circle of the synchronized spindle. Backworking takes place simultaneously to main spindle machining. Two additional tools can also be mounted and may be fitted with driven tool units. "Turret 2": - Turret with 6 symmetric dovetail tool holders, each station equipped with two mounting bores for cylindrical shank tools. The following tool systems can be used: - Stationary tools moveable in the Z-direction - Driven tools with Ø25 mm cylindrical shank (two positions per station can be equipped) - Including bar feeder LM 3200 - + various accessories (various diameter guide bushings/tool holders) Technical data: - Bar material diameter: (Ø 25 / Ø 36 / Ø 52) --> Round: Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> Square SW: Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> Hexagon SW: Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> Octagon SW: Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> Maximum bar length: 3200 mm --> From Ø 25 mm bars: minimum. 2,500 mm Cedewbvhaopfx Admsaa --> Up to Ø 25 mm bars: minimum. 1,500 mm --> Bar tray capacity = approx. 300 = 6 x Ø 52 mm bars Mass (bar feeder): 700 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Turning-milling center Takisawa TMM 250 3, year 2016, Fanuc Turning length: 1300 mm Turning diameter: 350 mm Max. spindle speed: 4000 rpm 9 axes 2 x spindles 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool turret with Y-axis (260 mm travel) and B-axis (230° / +/- 115°) Complete with 30-station tool changer Lower tool turret: 15-position turret – all positions driven Full simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool stations Workpiece magazine, right side of the machine, with gantry handling Driven tools on the turret. Csdpfxjrt Ip Nj Admoaa C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to high administrative expense (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Gamybos metai: 1990, Sąlyga: nepatikrintas (naudotas), Press force: 125 tonnes (2x63) Infinitely variable working speed: 0-10 mm/sec Return speed: 20 mm/sec Clearance between columns: 950x550 mm Table area (front access): 950x820 mm Caedpegy Hzpsfx Admsa Table area (lateral access): 1220x550 mm Ram area: see table dimensions Maximum installation height: 700 mm Stroke: 500 mm Weight: 5500 kg Height: 2900 mm Drive power: 18.5 kW 2 pressure cylinders with precision parallelism control Infinitely adjustable electronic stroke limiter

Sąlyga: naudotas, Gamybos metai: 2008, Galvutės apskritimo diametras 650/800 mm Cjdpfx Aow Rrbyjdmjaa Maksimali ruošinio ilgis 1100 mm Maksimalus modulis 20 (25) mm Minimalus modulis 0,5 mm Valdymas Siemens Sinumerik 840 D Bendroji prijungimo galia 62 kVA Nuolydžio kampas -45 / +120 ° Staklių svoris apie 10 t Įranga/priedai: - Aušinimo sistema - Drožlių transporteris - Techninė dokumentacija

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2021, Travel path X/Y/Z: 630mm/530mm/465mm, tool holder: SK40, spindle speed: 12,000 rpm, tool stations: 32, table size X/Y: 920mm/540mm, machine dimensions X/Y/Z: 2600mm/2350mm/2750mm, weight: approx. 6,500 kg. Documentation available. Inspection on site is possible. Caodpfswm Nphjx Admsa