Conv. lathe.

Sunmaster CH-2690

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, valdiklių gamintojas: MAZATROL, valdiklio modelis: MATRIX, Ši 3 ašių Mazak QTN 250 MX 1000 horizontalioji tekinimo mašina buvo pagaminta 2010 m. Jei norite gauti aukštos kokybės tekinimo galimybes, apsvarstykite mūsų parduodamą Mazak QTN 250 MX 1000 staklių. Norėdami gauti daugiau informacijos, susisiekite su mumis. Mašinos privalumai Chodpfx Aneyalpcslsd Techninės mašinos privalumai • Maks. Talpa: 640 • X ašies greitojo tiekimo greitis: 36000 / z ašies greitojo tiekimo greitis: 36000 / c ašies greitojo tiekimo greitis: 555 • Apdorojamas skersmuo: 380 • Maksimalus apdirbamas ilgis: 600 • Baro talpa: 76 • Savaiminio centravimo matmenys (pagrindinis velenas): 250 • Eiga: 1000/kūgis: cm 4 • Aušinimo skysčio bakas: 300 l

Būklė: geras (naudotas), The listed driven tools VDI 50 are designed for a SAUTER brand tool turret changer and are in good condition and fully functional. They have been used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight type, brands: NACKE + WTO, VDI 50, for SAUTER brand tool turret: Chjdpfx Anobql S Hjled Article No.: XVI 24275 1 drilling/milling unit, straight type, Manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17, DIN 5482 Price: €545.00 plus statutory VAT. Article No.: XVI 24277 1 drilling/milling unit, straight type, Manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17, DIN 5482 Price: €400.00 plus statutory VAT. Article No.: XVI 2687 1 drilling/milling unit, straight type, Manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17, DIN 5482 Price: €650.00 plus statutory VAT. Article No.: XVI 2687 1 drilling/milling unit, straight type, Manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17, DIN 5482 Price: €650.00 plus statutory VAT. Article No.: XVI 2687 1 drilling/milling unit, straight type, Manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17, DIN 5482 Price: €650.00 plus statutory VAT. Article No.: XVI 2687 1 drilling/milling unit, straight type, Manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17, DIN 5482 Price: €650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Būklė: naudotas, Gamybos metai: 2016, Overview The complete bottling line for large PET bottles is located in a mineral water plant and was used for filling water. The line has been regularly maintained and is in excellent condition. Output: 3,000 bottles/hour Chodpfx Anetuyq Rslsd List of machines: - Blow Molder | Kosme | KSB4RG 2016 | 3,600 bph - Air Conveyor | NTS | 2016 - Rinser - Filler - Capper | GyM | MONOBLOC 12/3 PVG | 1995 | 3,000 bph - Cap Feeder Tolva | GyM | 1995 - Handle Applicator | TAS | VA-1150/75C | 2009 | 3,000 bph - Handle Applicator | And&OR | 50SIA5000R8P2-TL | 2009 | 3,000 bph - Labelling Machine | Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4,100 bph - Batch Coder | MACSA | K-1030PLUS | 2008 - Bottle Inverter/Rotator | GyM | 2001 - Divider | SMI | DIVIPACK 2000 | 2002 - Shrink Wrapper | SMI | LSK 30F | 2002 | 7,200 bph (30 packs per minute, 2*2 on 2.5L / 2 on 5L bottles)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 200 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 675 mm, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: TNC 620 HSCI, veleno greitis (maks.): 10 000 aps./min, Įranga: dokumentacija / vadovas, VERTIKALUS APDIRBIMO CENTRAS MIKRON VCE 1200 PRO, PAGAMINTAS 2015 APSAUGA HEIDENHAIN TNC 620 HSCI ELEKTRONINIS RANKENĖLĖS EIGA: X 1200, Y 600, Z 675 MM STALO PAVIRŠIUS: 1220 x 620 MM ATSITIKTINIS 40 ĮRANKIŲ KEITIKLIS VIRŠUS: 10 000 APS./MIN., 18 KW DUBLUOTAS SRAIGTINIS IŠTRAUKIKLIS LINIJINIAI MATUOKLIAI VIDINIS AUŠINIMAS 30 BAR LAZERINĖ ĮRANKIŲ MATAVIMO DAVIKLIS PARUOŠIMAS DETALĖS MATAVIMO DAVIKLIUI (DAVIKLIS NEĮTRAUKTAS) Csdpfxoy Tvw Eo Anlshd

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Chsdpfouz If Nox Anlsd Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Būklė: labai geros būklės (naudotas), rida: 12 922 km, pirmoji registracija: 10/2014, kuro tipas: dyzelinas, ratų bazė: 4 500 mm, kuras: dyzelinas, kuro bako talpa: 400 l, spalva: balta, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6,

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: vadovas, darbinis plotis: 2 000 mm, Lenkimo kampas (maks.): 135 °, plieno lakšto storis (maks.): 1 mm, atgalinio ribotuvo reguliavimas: vadovas, bendras svoris: 540 kg, bendras ilgis: 2 400 mm, bendras plotis: 850 mm, bendras aukštis: 1 175 mm, Folding machine with segmented upper beam PNEUMATIC CYLINDER!!! Including manual back gauge Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of fingers ----- 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Csdpfx Anega T Dpsljhd Max. bending angle ----- 0 - 135° Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Būklė: naudotas, mašinos/transporto priemonės numeris: 053051, Grinding area: 200 x 25 mm Chedpfxebfp Ixe Anlsd Electrical connection: 380 V, 0.5 kW Space requirement: 550 x 450 x 1100 mm Weight: 95 kg

Būklė: naudotas, Gamybos metai: 1985, Drilling capacity in steel (diameter): 30 mm X-travel: 850 mm Y-travel: 435 mm Control: HEIDENHAIN TNC 150 Total power requirement: 16 kW Machine weight approx.: 3,500 kg Space requirement approx.: ___ m F.E.H.L.M.A.N.N (Switzerland) CNC-controlled precision drilling and milling machine Model: PICOMAX 100 CNC – 2+ Am Year of manufacture: 1985 Serial no.: 16 085109 X-axis (longitudinal): 850 mm Y-axis (transversal): 435 mm Z-axis (vertical): 210 mm Table size: 500 x 1,570 / 390 x 1,280 mm Min./max. distance from vertical spindle to table surface: 140 / 690 mm Vertical and motorised adjustment travel of drilling head: 540 mm Drill spindle overhang approx.: 450 mm Cedpfxjt Hxa Hs Anlohd Spindle taper: SF 32 Drilling capacity in steel: 30 mm Maximum spindle stroke (quill, vertical): 210 mm Spindle speeds (stepless, 2 ranges): 25 – 5,600 rpm Workpiece weight: 600 kg Feed rates XYZ: 1 – 8,000 mm/min. Drilling feeds, 6 automatic options: 0.03/0.07 to 0.4 mm/min. Rapid traverse XYZ: 4/8 m/min. Spindle drive power: 6 kW Total drive power approx.: 16 kW – 380 V – 50 Hz Weight approx.: 3,500 kg Accessories / Special equipment: • HEIDENHAIN CNC – 2-axis path control, type TNC 150, with color monitor, graphics, all standard subroutines and cycles, thread cutting cycles, manual control device or electronic handwheel, RS 232 interface, etc. The drilling spindle axis (Z) can be activated manually or via CNC control. • Drilling depth can be preset using a 12-position turret stop, displayed digitally on the monitor. • Drilling head can be programmed via height positioning device to 3 preset positions. • Precision coordinate table for X/Y CNC axes with hardened ballscrew spindles. • With quick-change tool system and various tool holders, various drill chucks, coolant system, etc. Condition: Good to very good – demonstration ready under power Delivery: Ex stock – as inspected Payment: Net – due on receipt of invoice.

Būklė: geras (naudotas), Gamybos metai: 2009, Interface-Modul Panel Hersteller: SIEMENS S7 Typ: X1 Profibus-DP ET200S Das Panel besteht aus folgenden Komponenten: 1 - X1 Profibus-DP ET200S 1 - IM 151-1 Standard 6ES7-151-1AA04-0AB0 1 - PM-E 6ES7 138-4CA01-0AA0 4 - 4DI 6ES7 131-4BD01-0AA0 3 - 4DO 6ES7 132-4BD01-0AA0 1 - 1SI 6ES7 138-4DF01-0AB0 In verschiedenen Baugruppen, mehrere Teile. English Translation: Cjdpfjgblhvox Anlshd Interface module panel Manufacturer: SIEMENS S7 Type: X1 Profibus-DP ET200S The panel consists of the following components: 1 - X1 Profibus-DP ET200S 1 - IM 151-1 Standard 6ES7-151-1AA04-0AB0 1 - PM-E 6ES7 138-4CA01-0AA0 4 - 4DI 6ES7 131-4BD01-0AA0 3 - 4DO 6ES7 132-4BD01-0AA0 1 - 1SI 6ES7 138-4DF01-0AB0 Available in various assemblies, multiple parts.