Rotacinis tiektuvas

Sunds MDF LAF-200

Sąlyga: naujas, Gamybos metai: 2024, Magnetic separator for chip conveyor line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Tube diameter: 180 mm Redpfxscqvhwe Agijp Location: In stock at 54634 Bitburg - immediately available -

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Rjdpfx Ajw Sy T Hjgiop Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, Drying paternoster for finger-jointed boards Consisting of: Rodpfx Ajwclkyogijp - Transfer chain after the finger-jointing press, foldable - Drying paternoster approx. 7 m, for board lengths up to 6 m - Cut-off and zero saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine not for sale - Package cross conveyor The machine is in very good condition, with very few operating hours. Machine is still assembled, but available immediately.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: EWD DWK T-4, EWD pjūklų linija su spaneriu EWD ZE Microtec 3D matavimas EWD spaneris FZ5 EWD EVW ritininis mechanizmas Lanksti dviejų velenų diskinė pjūklinė Redpfx Asx Rn Udegiep EWD DWK 700 T-4 4 lankstūs pjūklo ašys Pjovimo aukštis 60-340 mm 2x200 kW Pilnas valdymas Pilna hidraulika/skirstymo spintos

Sąlyga: reikia remonto (naudotas), Gamybos metai: 1999, Funkcionalumas: neveikiantis, Storti prizmės staklės 4x35 AG Rjdpslxqk Rjfx Agijp Volelio įvadas Išėjimas Valdymo pultas Mašinos restauravimui

Sąlyga: geras (naudotas), Gamybos metai: 2001, Parduodu 3 ašių CNC apdirbimo centrą HOLZ-HER UNI-MASTER 7226 su traversiniu stalu. Pagaminimo metai – 2001 m. Konfigūracija: - 3 ašių pagrindinis velenas, ką tik pilnai suremontuotas, aušinamas vandeniu - Įrankių keitiklis 6 pozicijų HSK63 ant galvos - 1 griovelio pjūklas X kryptimi - Gręžimo galva su 16+4 gręžimo velenais - Naudojamas darbinis plotas 3100x1360 mm - 2 darbiniai stalai, 4 tvirtinimo zonos Rsdpei U Dxujfx Agiop - Automatinė centrinė tepimo sistema - Holzher programinė įranga su naudojimo instrukcija - SIEMENS ELMO-L S22 2,35 kW siurblys - Papildomas vakuumas šablonų darbams arba papildomiems spaustuvams Gera būklė. Galima iš karto paimti iš sandėlio.

Gamybos metai: 2004, Sąlyga: naudotas, Ottevanger C5 Containerized Feed Mill Automated grinding and mixing line with a capacity of approx. 5 t/h. Including, among others, the following components: - 55 kW Hammer Mill 650-375 - 11 kW 1000L Mixer PM1000 - Silos Rjdpfx Ageq Hr Rzjiep - Batch Weigher - Dosing Screws - Elevators - Hoppers - Control Cabinets

Sąlyga: naudotas, Presssystem: Kontinuierlich / Kalander Hauptlieferanten: Bison / Berstorff Konstruktive Leistung: 160 m³/Tag Erreichte Kapazität ca.: 200 m³/Tag Effektive Betriebszeit: 23 Std./Tag Referenzdicke: 3,2 mm Max. Bruttobrettbreite: 2500 mm Max. Nettobrettlänge: 2440 mm Max. Nettobrettbreite: unbegrenzt Redpfx Agsul H Nmsisp Min. Nettobrettbreite: 1220 mm (teilbar) Min. Brettdicke: 2,0 mm Max. Brettdicke: 10 mm Elektrisches System: 380 V, 50 Hz Baujahr: 1985 Hauptmodernisierungen: 2007-2009, 2016 Betrieb bis: Mai 2018

Sąlyga: geras (naudotas), Gamybos metai: 2008, Granulator La Meccanica CLM 800 POR The machine does not have doors It was used for processing sawdust Rjdpfewdawqex Agiop

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007350, X-axis working area: 4000 mm Y-axis working area: 1400 mm Working table: with vacuum pod supports Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 28 Redjwcyd Iopfx Agiop