Cilindrinio šlifavimo staklės - Išorė
STUDER eco 650 CNC

Name: STUDER eco 650 CNC
Brand: STUDER
Availability: InStock

Gamybos metai

2002

Būklė

Naudotas

Vieta

Metzingen

Cilindrinio šlifavimo staklės - Išorė STUDER eco 650 CNC

Duomenys apie mašiną

Mašinos pavadinimas:: Cilindrinio šlifavimo staklės - Išorė

Gamintojas:: STUDER

modelis:: eco 650 CNC

Gamybos metai:: 2002

Būklė:: naudotas

Kaina ir vieta

Vieta:: Metzingen

Skambinti

Pasiūlymo informacija

Skelbimo ID:: A17853311

Nuorodos numeris:: 1049-800878

Atnaujinimas:: paskutinį kartą atnaujinta 05.06.2025

aprašymas

Grinding diameter 10-300 mm
Grinding length 650 mm
Centre height 175 mm
Total power requirement 12 kW
Machine weight approx. 3.7 t

O F F E R

We are pleased to offer you, ex stock and subject to prior sale and errors, on a non-binding basis:

STUDER (CH)
CNC Precision Cylindrical Grinding Machine
Model eco 650 CNC
Year of manufacture 2002 Serial No. 026

Grinding diameter approx. min./max. 10 - 300 mm
Centre height 175 mm
Distance between centres / Maximum workpiece length 650 mm
Maximum table travel (Z-axis) 800 mm
Maximum workpiece weight between centres approx. 80 kg

Slide travel:
Longitudinal axis Z (resolution 0.0001 mm) max. 800 mm
Cross axis X (resolution 0.0001 mm) 285 mm
Feedrates / Rapid traverse in Z-/X-axis 0.001 – 10,000 / 5,000 mm/min
Grinding slide swiveling (fixed angle) 0 & 30°
Table slide swivel max. approx. 10°
Dksdpfova I N Uex Aitjp

Grinding wheel size: Ø x width x bore 500 x 80 x 127 mm
Grinding wheel speed 1,760 rpm

Workhead - infinitely variable speed approx. 0 – 1,000 rpm
Workhead spindle taper MK 5

Spindle drive 7.5 kW
Total drive 12 kW - 400 V - 50 Hz
Weight approx. 3,700 kg

Accessories / Special equipment:

• FANUC 3-axis CNC control Type 21i-T with all necessary grinding, measuring and dressing cycles, e.g. shoulder grinding, straight plunge grinding / longitudinal grinding, grinding of several diameters, taper grinding, automatic dressing, etc., and hand control unit with electronic handwheel
• C-axis in workhead for spindle positioning (and non-circular grinding)
• Grinding spindle stock with grinding wheel on the right side and swiveling 30°
• Fixed workheadstock with MK 5 mount / W 30
• Hydraulic tailstock with roundness correction, dresser separately mounted on table
• Pneumatic support for easier adjustment of the tailstock and workheadstock on the table slide
• Various accessories, different flanges and operating manuals
• Partial enclosure with monitored sliding door
• Machine bed made of GRANITAN mineral casting

Condition: good to very good – demonstration ready! Here you find a video:

Delivery: ex stock - as inspected
Payment: strictly net - upon receipt of invoice

We have a large selection of all kinds of grinding machines, please always enquire.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Tiekėjas

Registruotas nuo: 2005

215 Skelbimai internetu

Skambinti

Siųsti užklausą

Telefonas & Faksas

+49 7123 ... skelbimai

Faksas:

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Siūlų valcavimo mašina PROFIROLL BAD DUEBEN ROLLEX

Metzingen

1 242 km

Siūlų valcavimo mašina
PROFIROLL BAD DUEBENROLLEX

Skambinti

Būklė: naudotas, Gamybos metai: 2001, Pressure 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system Total power requirement: 29 kW Machine weight approx. 9.5 t Required floor space approx. ... m Quotation We are pleased to offer you—subject to prior sale and errors in technical data—from our stock: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model ROLLEX, Year 2001 Steplessly adjustable rolling force from 0.2 to 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive: approx. 8.5 kW each Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Dkjdpfxst Hw N Ts Aitsp Accessories / Special Features - The machine is equipped with a modern CNC control system developed by the manufacturer. Allows input of all relevant process and workpiece data, enabling fast and straightforward set-up for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. - Built-in (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device, prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the workpiece front. The stroke of the workpiece slide is approx. 500 mm—so the workpiece is clamped and moves hydraulically between the two rolling tools. - Cooling unit for hydraulic oil, separate electrical cabinet, CNC operating panel, etc. - Transparent safety covers in the working area. Central lubrication.

Peržiūrėti detales

Mažas skelbimas

Kūginio dantračio frezavimo staklės – tiesūs dantys GLEASON-PFAUTER No. 104 CNC

Hilden

1 212 km

Kūginio dantračio frezavimo staklės – tiesūs dantys
GLEASON-PFAUTERNo. 104 CNC

Skambinti

Būklė: naudotas, Kūginis atstumas min./maks. 0-108 mm Posvyrio kampas min./maks. 5°/84° Valdymas: GE Fanuc Series 0-GC Dalinio apskritimo skersmuo (1:1 santykis): 152 mm Dalinio apskritimo skersmuo (10:1 santykis): 216 mm Skersmenų atstumas (mažiausias/stambiausias): 1,3/8,5 Mod. Dkodpfx Aioyh Rmmstsp Žvaigždutės galinė plokštuma maks. 35 mm Peilio velenas – apsukų diapazonas: 41–121 aps./min Darbinio veleno apsukų diapazonas: 0–33,33 aps./min Svoris: 9025 kg Užimamas plotas apie 2707 x 2720 x 2200 mm Įranga/priedai: - 18 peilių komplektų - Drožlių transporteris - Techninė dokumentacija

Peržiūrėti detales

Mažas skelbimas

CNC ciklinio valdymo tekinimo staklės, tekinimo staklės, automatinės tekinimo staklės, ciklinės teki HARRISON Alpha 400 Plus

Hessisch Lichtenau

1 040 km

CNC ciklinio valdymo tekinimo staklės, tekinimo staklės, automatinės tekinimo staklės, ciklinės teki
HARRISONAlpha 400 Plus

7 900 €

Fiksuota kaina plius PVM

Skambinti

Būklė: naudotas, CNC cycle-controlled lathe HARRISON Type Alpha 400 Plus Mach. No. P30180/150 Year of manufacture: 1998 Centre distance 1250 mm Swing over bed 400 mm Centre height 200 mm Swing over cross slide 245 mm Max. turning diameter in gap 585 mm Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock taper MK 5 Spindle bore 54 mm Spindle nose size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Level 1): 15-275 rpm Spindle speed range (Level 2): 35-795 rpm Spindle speed range (Level 3): 110-2500 rpm Feed rate X and Z: 0.03 - 0.6 mm/rev. Rapid traverse X-axis max. 2000 mm/min. Rapid traverse Z-axis max. 4000 mm/min. Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power 7.5 kW Electrical connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC - Language in French (France) - Automatic 3-range gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with various transmission ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX quick-change toolholder size B with 2 tool inserts - 1 live center Dodpjh Hvk Ajfx Aitskp - 1 quick-action drill chuck RÖHM, 3-16 mm - Hinged chuck guard - Hinged working area safety doors - Swarf tray with coolant device beneath the machine bed - Control cabinet fixed to the machine - RS 232 interface Required space (L x W x H) 2600 x 1450 x 1550 mm Weight 1950 kg Good condition

Peržiūrėti detales

Mažas skelbimas

Cilindrinio šlifavimo staklės - Universalios KELLENBERGER KEL-VARIA UR 250-1000 Kelco120

Kirchheim unter Teck

1 225 km

Cilindrinio šlifavimo staklės - Universalios
KELLENBERGERKEL-VARIA UR 250-1000 Kelco120

Skambinti

Būklė: naudotas, Gamybos metai: 2000, Šlifavimo skersmuo 450 mm Šlifavimo ilgis 1000 mm Centros aukštis 225 mm Mašina buvo dalinai atnaujinta, su nauja geometrija, ir naudota vos kelias savaites, po ko dėl bankroto buvo vėl parduota. Bendros mašinos nuotrauka – beveik identiškos mašinos. Originalios mašinos vidaus ir ruošinio spindelės nuotraukos. Dkedexzk Niopfx Aitjp – kapitalinis aptarnavimas – nauja stalo geometrija – dalinis vidinės dalies dažymas Šlifavimo diskų įranga KAIRĖJE 400x63x127mm (standartinė) Šlifavimo diskų įranga DEŠINĖJE 300x40x127mm Vidinio šlifavimo įrenginys Ø120mm HF špindeliams CNC valdymas KELCO 120 C ašis nereguliariam šlifavimui. Kel-Poly B AŠIS: CNC valdoma B ašis KELCO 120: v pastovus 35m/s arba 45m/s Greitaeigis vidinio šlifavimo špindelis Valdymo blokas MFV ir MFZ špindeliams Hidraulinis priešveržimas atraminiam centrui NĖRA mikroreguliavimo atraminiame centre Spyruoklinis priešveržiamas įdėklas Viršstalo aušinimas Standartinis ruošinio spindelio blokas MK 5 DIN 55026, 5 dydis MIKRO-reguliavimas stand. ruošinio spindelio blokui Pastatymo įrenginys po stalu Aktyvus išilginis pozicionavimas KELPOS, MARPOSS, montuota ant šlifavimo galvos Įrankių matavimo sistema KELSET, MARPOSS Prisilietimo sensorius MARPOSS Matavimo valdiklis MARPOSS Minialsar paruoštas Popierinis juostinis filtras

Peržiūrėti detales

Mažas skelbimas

Plovimo įrenginys su Rätzmühle ir dozatoriumi ISAR IWR 2000D

Freilassing

1 110 km

Plovimo įrenginys su Rätzmühle ir dozatoriumi
ISARIWR 2000D

5 690 €

Fiksuota kaina plius PVM

Skambinti

Gamybos metai: 2026, būklė: naujas, Fruit and Vegetable Washing System. The unit is constructed entirely from stainless steel. It features a sorting grid, a washing tank, and a conveyor belt. Produce drops into the water for initial cleaning. After pre-washing, the conveyor transports the fruit for further thorough cleaning with fresh water. The washed produce is then fed into the mill, where interchangeable sieves allow you to achieve the required mash consistency. The system is fitted with a dosing attachment suitable for pack presses. Technical Data: • Rated capacity: 1,500 kg/h • Power requirements: 3 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L/shift • Water consumption: 12 L/min • Water connection: 3/4" quick coupling Dkjdpfx Astu Ikceitop • IP65 electrical control panel • Swivelling grating mill • Equipped with lockable castors • Easy to clean • Conveying capacity can be precisely adjusted via frequency inverter Dimensions: Length: 3,250 mm Width: 840 mm Height: 2,270 mm Weight: 200 kg

Peržiūrėti detales

Mažas skelbimas

Centro šlifavimo staklės TECHNICA ZSM 5100

Beringen

1 344 km

Centro šlifavimo staklės
TECHNICAZSM 5100

Skambinti

Mažas skelbimas

Voumard šlifavimo velenai, REFU HF dažnio keitiklis Voumard Schleifspindeln REFU HF

Pfaffenhofen

1 221 km

Voumard šlifavimo velenai, REFU HF dažnio keitiklis
VoumardSchleifspindeln REFU HF

Skambinti

Būklė: naudotas, Gamybos metai: 1992, veleno greitis (min.): 7 500 aps./min, veleno greitis (maks.): 24 000 aps./min, 4 motor-driven grinding spindles (liquid-cooled, with sealing air / oil mist lubrication) including REFU HF frequency converter, e.g., for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz Dksdpfsl Tn Afjx Aitop REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for the power supply of motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as-is – year of manufacture approx. 1992. A collection of various grinding spindle shafts / arbors for grinding wheels are available for these grinding spindles and can be purchased separately. Price / details on request. All technical details are subject to errors or omissions. We sell exclusively to countries within the European Community.

Peržiūrėti detales

Mažas skelbimas

CNC gręžimo stalas 2000 x 1800 x 16 T UNION Ti 1800

Babberich

1 224 km

CNC gręžimo stalas 2000 x 1800 x 16 T
UNIONTi 1800

Skambinti

Gamybos metai: 1998, būklė: geras (naudotas), Manufacturer: UNION Model: Ti 1800 Year of manufacture: 1998 Specifications: Metric / US Standard Table length: 2000 mm Dsdpfskwcdbox Aitskp Table width: 1800 mm Table load capacity: 16,000 kg Feed, V axis: 1250 mm B-axis rotation: 360.000 ° B-axis rotation speed: 1.35 rpm V-axis traverse speed: 4000 mm/min Approximate dimensions: Length: 3400 mm Width: 2000 mm Height: 920 mm Weight: 6500 kg Please note: The information on this page has been provided by us and, where possible, obtained from the manufacturer to the best of our knowledge and belief. The information is given in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual terms are implied. We recommend verifying all key details.

Peržiūrėti detales

Mažas skelbimas

5 ašių apdirbimo centras Deckel Maho DMF 200/8

Düsseldorf

1 215 km

5 ašių apdirbimo centras
Deckel MahoDMF 200/8

Skambinti

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 12 719 h, X ašies eiga: 2 000 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 850 mm, padavimo ilgis X ašis: 2 000 mm, padavimo eiga Y ašimi: 800 mm, padavimo ilgis Z ašis: 850 mm, nominali (akivaizdi) galia: 21 kVA, valdiklių gamintojas: Heidenhain TNC 640 mit CELOS, ruošinio svoris (maks.): 2 000 kg, bendras aukštis: 3 200 mm, bendras ilgis: 4 500 mm, bendras plotis: 7 100 mm, stalo plotis: 850 mm, stalo ilgis: 2 350 mm, sukimosi greitis (min.): 15 000 aps./min, veleno greitis (min.): 15 000 aps./min, Year of manufacture: 2022 CNC Control: Heidenhain TNC 640 with CELOS Axes Travel range X-axis (mm): 2000 Travel range Y-axis (mm): 800 Travel range Z-axis (mm): 850 C-axis indexing (degrees): 360º (0.001) B-axis indexing (degrees): ±120 Rapid traverse (m/min): 50 Axis acceleration (m/s²): 5 Work table Pallet dimensions (mm): 2350x850 Max. workpiece weight (kg): 2000 NC milling/turning table: Pallet dimensions (mm): Ø800 Max. workpiece weight (kg): 800 Table rotation speed (rpm): 50 Spindle Max. spindle speed (rpm): 15000 Spindle drive power (kW): 21/16 (40%DC/continuous) Spindle torque (Nm): 111/85 (40%DC/continuous) Cooling Coolant supply through the spindle (bar): 40 Tank capacity (liters): 600 Tool system Tool holder: SK 40 Number of tools in magazine: 40 Tool changer type: Double gripper With free adjacent pockets (mm): 130 With occupied adjacent pockets (mm): 80 Max. tool length (mm): 400 Max. tool weight (kg): 8 Chip-to-chip time (sec.): from 7.5 Equipment Dedpfxey Shgvo Aitjkp Chip conveyor Fixed table with integrated rotary table Infrared probe Internal coolant supply Rinsing gun Selectable air blast through spindle center via M-function Signal lamp Mist separator NC rotary tilting table Prepared for the use of 3D quickSET MPC – Machine Protection Control Automatic work area door Automation interface Machine run time: Hours powered on: 18,669 Spindle operating time: 12,719 Basic machine: Dimensions / Weight Length (mm): 4500 Width (mm): 7100 Height (mm): 3200

Peržiūrėti detales

Mažas skelbimas

Koordinačių matavimo mašina Zeiss CONTURA G2 7/7/6

Dylaki

623 km

Koordinačių matavimo mašina
ZeissCONTURA G2 7/7/6

29 999 €

~~39 999 €~~

EXW VB plius PVM

Skambinti

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 201502530269, matavimo diapazonas X ašis: 700 mm, matavimo diapazonas Y ašis: 700 mm, matavimo diapazonas Z ašis: 600 mm, stalo apkrova: 560 kg, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of manufacture: 2015 | Commissioned: 2016 | Perfect condition | Very low operating hours For sale: CMM (Coordinate Measuring Machine) ZEISS Contura G2 with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe. The device comes from a controlled laboratory environment and has only been used "on-demand" during a single shift, never on a production line – resulting in very low actual mileage and excellent technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring range (X/Y/Z): 700 / 700 / 600 mm Year of manufacture: 2015 Year of commissioning: 2016 Technical & visual condition: perfect Measurement error MPE (E0): 1.7+L / 350 μm 🔹 Configuration & Equipment ✅ ZEISS VAST XXT TL1 active scanning probe ✅ Probe rack / changer ✅ Probe styli set (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Calibration sphere ✅ BP26_SE control console 🔹 Usage History Dkodpfx Asyzmbdeitjp Device operated exclusively in laboratory mode Sporadic, project-based use ("on-demand") Single shift, no serial or production work This results in very low mechanical wear 🔹 Service & Calibration ✅ Service and calibration performed exclusively by official ZEISS service ✅ Regular maintenance as per manufacturer’s recommendations ✅ No third-party intervention ✅ Device fully functional 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Complete documentation ✅ Transport on buyer’s side

Peržiūrėti detales

Reklamuokite čia